Jump to content
Please support this forum by joining the SH Patreon ×
Sturgeon's House

N-L-M

Forum Nobility
  • Posts

    732
  • Joined

  • Last visited

  • Days Won

    19

Reputation Activity

  1. Tank You
    N-L-M reacted to Merc321 in Your Tank Stories   
    One of my favorite memories when it comes to working on and driving my Daimler Ferret was the time I took it to an off-road park. It was very entertaining to watch the ATV and jeep guys look completely shocked when an armored car was going through mud that they were afraid to drive into. I very much have a love hate relationship with British wheeled armor. At this point in time I have one running Ferret, one that is awaiting restoration, and a Saracen that is also awaiting further restoration. The reason for my love hate relationship with them is that while they are a ton of fun to drive, maintaining them can be difficult at times, especially if you have to deal with an electrical issue. Despite the many, many, ups and downs I've had with working on British armor, it's always rewarding when you fire up the engine and take them for a drive, be it off-road or on a run into town.
  2. Tank You
    N-L-M got a reaction from BaronTibere in Mechanized Warfare is now a moderated subforum   
    Gather round, ye posters of Mechanized!
    Recent events have indicated that a refresher course on the posting standards of this forum is needed, and so:
    Reminder that SH is primarily, first and foremost, a document-based forum. While there is a gentlemen's agreement kind of deal whereby you are not expected to post your sources with every post you make, it is implicitly assumed that you actually have such sources and that they actually say what you claim they do. Furthermore, it is expected that when requested, you post the relevant sources.
    While it is known that not all the information relating to the subjects discussed on this forum is public domain, and that therefore informed speculation is a large part of any debate, it is expected that:
    A. your speculation have some basis in reality (which can in turn be backed up with at least circumstantial evidence), and:
    B. that it be presented as such.
    Here is a very good example of how not to post:
     
    You would note that the poster in question is extremely confident in their tone with no indication to the average reader that this is in fact complete bullshit, and has no basis whatsoever for the claims he is making. This is in fact the exact kind of posting that is not desired on this forum.
     
    On the other hand, here is a good example of speculation done right:
     
    The poster in question clearly explains, by analyzing available imagery and using basic logic, why in fact they have reached their conclusions, and backs it up with references to available literature on the topic. No wild assumptions are fielded as fact, nor are any major claims presented without at the very least circumstantial photographic evidence. And all speculation is presented as such- "a seems to be true", "b seems to be better than c", "I'd say d is the case", and so on. Even a poorly-informed reader can easily distinguish between what is implicitly assumed, what is actually known and what is fresh new (grounded) speculation.
     
    For those of you who are new, or just rusty, the posting rules are fairly clear:
    Kindly re-familiarize yourselves with the rules.
     
    And last but not least, remember that the forum motto is  Referte avt morimini, link or die. Hiding behind sources that cannot be confirmed, that have mysteriously disappeared, or that "you seem to remember" do not count. While nobody is expecting you to have all your sources at hand at any given moment, it is expected that you either post them at the nearest possible convenience or back off the claims which remain unsubstantiated until further notice. Failure to do so is considered poor taste, to say the least. Many posters who are no longer with us did not heed the warnings and therefore chose themselves the "morimini" route.
     
    The management thanks you for your voluntary cooperation.
  3. Tank You
    N-L-M got a reaction from Lord_James in Mechanized Warfare is now a moderated subforum   
    Gather round, ye posters of Mechanized!
    Recent events have indicated that a refresher course on the posting standards of this forum is needed, and so:
    Reminder that SH is primarily, first and foremost, a document-based forum. While there is a gentlemen's agreement kind of deal whereby you are not expected to post your sources with every post you make, it is implicitly assumed that you actually have such sources and that they actually say what you claim they do. Furthermore, it is expected that when requested, you post the relevant sources.
    While it is known that not all the information relating to the subjects discussed on this forum is public domain, and that therefore informed speculation is a large part of any debate, it is expected that:
    A. your speculation have some basis in reality (which can in turn be backed up with at least circumstantial evidence), and:
    B. that it be presented as such.
    Here is a very good example of how not to post:
     
    You would note that the poster in question is extremely confident in their tone with no indication to the average reader that this is in fact complete bullshit, and has no basis whatsoever for the claims he is making. This is in fact the exact kind of posting that is not desired on this forum.
     
    On the other hand, here is a good example of speculation done right:
     
    The poster in question clearly explains, by analyzing available imagery and using basic logic, why in fact they have reached their conclusions, and backs it up with references to available literature on the topic. No wild assumptions are fielded as fact, nor are any major claims presented without at the very least circumstantial photographic evidence. And all speculation is presented as such- "a seems to be true", "b seems to be better than c", "I'd say d is the case", and so on. Even a poorly-informed reader can easily distinguish between what is implicitly assumed, what is actually known and what is fresh new (grounded) speculation.
     
    For those of you who are new, or just rusty, the posting rules are fairly clear:
    Kindly re-familiarize yourselves with the rules.
     
    And last but not least, remember that the forum motto is  Referte avt morimini, link or die. Hiding behind sources that cannot be confirmed, that have mysteriously disappeared, or that "you seem to remember" do not count. While nobody is expecting you to have all your sources at hand at any given moment, it is expected that you either post them at the nearest possible convenience or back off the claims which remain unsubstantiated until further notice. Failure to do so is considered poor taste, to say the least. Many posters who are no longer with us did not heed the warnings and therefore chose themselves the "morimini" route.
     
    The management thanks you for your voluntary cooperation.
  4. Tank You
    N-L-M got a reaction from Belesarius in Mechanized Warfare is now a moderated subforum   
    Gather round, ye posters of Mechanized!
    Recent events have indicated that a refresher course on the posting standards of this forum is needed, and so:
    Reminder that SH is primarily, first and foremost, a document-based forum. While there is a gentlemen's agreement kind of deal whereby you are not expected to post your sources with every post you make, it is implicitly assumed that you actually have such sources and that they actually say what you claim they do. Furthermore, it is expected that when requested, you post the relevant sources.
    While it is known that not all the information relating to the subjects discussed on this forum is public domain, and that therefore informed speculation is a large part of any debate, it is expected that:
    A. your speculation have some basis in reality (which can in turn be backed up with at least circumstantial evidence), and:
    B. that it be presented as such.
    Here is a very good example of how not to post:
     
    You would note that the poster in question is extremely confident in their tone with no indication to the average reader that this is in fact complete bullshit, and has no basis whatsoever for the claims he is making. This is in fact the exact kind of posting that is not desired on this forum.
     
    On the other hand, here is a good example of speculation done right:
     
    The poster in question clearly explains, by analyzing available imagery and using basic logic, why in fact they have reached their conclusions, and backs it up with references to available literature on the topic. No wild assumptions are fielded as fact, nor are any major claims presented without at the very least circumstantial photographic evidence. And all speculation is presented as such- "a seems to be true", "b seems to be better than c", "I'd say d is the case", and so on. Even a poorly-informed reader can easily distinguish between what is implicitly assumed, what is actually known and what is fresh new (grounded) speculation.
     
    For those of you who are new, or just rusty, the posting rules are fairly clear:
    Kindly re-familiarize yourselves with the rules.
     
    And last but not least, remember that the forum motto is  Referte avt morimini, link or die. Hiding behind sources that cannot be confirmed, that have mysteriously disappeared, or that "you seem to remember" do not count. While nobody is expecting you to have all your sources at hand at any given moment, it is expected that you either post them at the nearest possible convenience or back off the claims which remain unsubstantiated until further notice. Failure to do so is considered poor taste, to say the least. Many posters who are no longer with us did not heed the warnings and therefore chose themselves the "morimini" route.
     
    The management thanks you for your voluntary cooperation.
  5. Tank You
    N-L-M got a reaction from Sturgeon in Mechanized Warfare is now a moderated subforum   
    Gather round, ye posters of Mechanized!
    Recent events have indicated that a refresher course on the posting standards of this forum is needed, and so:
    Reminder that SH is primarily, first and foremost, a document-based forum. While there is a gentlemen's agreement kind of deal whereby you are not expected to post your sources with every post you make, it is implicitly assumed that you actually have such sources and that they actually say what you claim they do. Furthermore, it is expected that when requested, you post the relevant sources.
    While it is known that not all the information relating to the subjects discussed on this forum is public domain, and that therefore informed speculation is a large part of any debate, it is expected that:
    A. your speculation have some basis in reality (which can in turn be backed up with at least circumstantial evidence), and:
    B. that it be presented as such.
    Here is a very good example of how not to post:
     
    You would note that the poster in question is extremely confident in their tone with no indication to the average reader that this is in fact complete bullshit, and has no basis whatsoever for the claims he is making. This is in fact the exact kind of posting that is not desired on this forum.
     
    On the other hand, here is a good example of speculation done right:
     
    The poster in question clearly explains, by analyzing available imagery and using basic logic, why in fact they have reached their conclusions, and backs it up with references to available literature on the topic. No wild assumptions are fielded as fact, nor are any major claims presented without at the very least circumstantial photographic evidence. And all speculation is presented as such- "a seems to be true", "b seems to be better than c", "I'd say d is the case", and so on. Even a poorly-informed reader can easily distinguish between what is implicitly assumed, what is actually known and what is fresh new (grounded) speculation.
     
    For those of you who are new, or just rusty, the posting rules are fairly clear:
    Kindly re-familiarize yourselves with the rules.
     
    And last but not least, remember that the forum motto is  Referte avt morimini, link or die. Hiding behind sources that cannot be confirmed, that have mysteriously disappeared, or that "you seem to remember" do not count. While nobody is expecting you to have all your sources at hand at any given moment, it is expected that you either post them at the nearest possible convenience or back off the claims which remain unsubstantiated until further notice. Failure to do so is considered poor taste, to say the least. Many posters who are no longer with us did not heed the warnings and therefore chose themselves the "morimini" route.
     
    The management thanks you for your voluntary cooperation.
  6. Funny
    N-L-M reacted to Xoon in Competition: Californium 2250   
    Pfft, of course not, who would want to squeeze more power out of  it? he he
     
    * discreetly crumples paper and throws in trash*
  7. Metal
    N-L-M reacted to Sturgeon in Forum Improvements and Changelog   
    Cry havoc and let slip the dogs of war.
  8. Tank You
    N-L-M reacted to SH_MM in StuG III Thread (and also other German vehicles I guess)   
    It is quite a mess:
    The requirements of the Czech army aren't finished yet. They are still working on them, adding new ones and increasing the overall length of the documents containing the requirments - it has reached more than one hundred pages (DIN A4). Only four pages of requirements were given to the defence industry (BAE Systems, General Dynamics, PSM and Rheinmetall) before they started bidding/show-casing their offers.   Only European companies (and trans-European such as Turkey and Israel) were asked and allowed to bid. South Korea, despite being a large industrial partner, was ignored. The requirements didn't specify a manned or unmanned turret until recently - that's why three our of five IFVs tested in Libava had unmanned turrets. The new requirement for a manned turret was added - according to Czech journalists who asked a spokesperson of the Czech MoD - because Australia demands a manned turret for LAND 400 and the United States have showncased optionally manned turrets on the Stryker. This new requirement invalidates test results and eliminates the Puma, the ASCOD 35 and the CV90 CZr from the competition. All IFVs tested in Libava were configured for nine men (crew of 3 + 6 dismounts) as originally required - but the requriement for crew capacity was changed to eleven men (crew of 3 + 8 dismounts). None of the vehicles tested in Libava is capable of transporting 11 men with a manned turret. The bidding companies have time until some point of time in May to submitt their offers, the rather short time between the changes of requirements and the deadline is a huge problem. The Czech army doesn't want to be the first user of a new infantry fighting vehicle, they want to buy a vehicle that is already in service with at least one user. This effectively eliminates the Lynx KF31, Lynx KF41, ASCOD 35 and Ajax/ASCOD 42. In combination with the manned turret and the dismount requirements, there is no IFV meeting all requirements oof the Czech army.  The Czech government demands that the state-owned company VOP CZ will act as system integrator, manufacturer of components and provider of maintenance services. The army dislikes this, because it will increase the costs of the new IFVs. Side note: while it has been previously reported that the Puma hit 37 out of 40 shots at targets at Libava, the results of the other contenders have been rather unknown. According to the article, the next best result was 19 out of 40 shots hit. A lot of people are really pissed, because quite a lot of money was invested into the development, search for industrial partners and marketing of vehicles that are now eliminated from the tender. The ASCOD 35 with Samson Mk. 2 RWS and the CV90 CZr with Kongsbergt MCT 30 turret were more or less specifcally developed for the Czech tender (well, CV90 CZr already existed earlier, but as unfinished variant), while PSM held multiple expensive conferences to find industrial partners.
  9. Tank You
    N-L-M got a reaction from LoooSeR in Israeli AFVs   
    Now answer the question of how you do the same with drivetrain components that aren't optimistically tiny, and a conventional turret- cause shoving the gun turret waaay the fuck back to balance the thing and forcing the trunnions into the stratosphere to get your desired depression may be fine with an overhead weapons mount, but it quickly gets you to unreasonably large and tall turrets if you want to have any actual armor on them as well.
    In short, it results in a bloat tank, and bloat is not generally seen as a positive feature of tanks.
    Congratulations! you have found A Source!
    Only problem is, it doesn't say what you says it does! At no point does that state that the switch to the MTU is what allowed them to increase the volumes allocated to armor because of the powerpack length. FFS, you're the one who's supposed to be able to read these sand runes.
    I'mma assume you mean similar module construction, cause if you actually mean they use the same module, lel. But even if that is the case, you'd note that I was actually praising the Namer for having a better hull armor layout than the Merk 3.
    The Namer is indeed taller, but there's much more to it than that. For a start, the Namer has an actual armor module in front of the transmission access door, above the fuel tanks, which is conspicuously lacking on the Merk 3, despite there being no good reason for the fuel tanks not being a couple centimeters shorter in compensation, y'know, the way it is in the Merk 4 and Namer. Likewise, the Namer's transmission cover module is much better laid out than that of the Merk 3. The Merk 3's cover wastes a lot of the available space between the transmission and the gun depression swept volume on inane shit like the travel lock and the bump stops for opening, which could just as easily have been placed over the fuel tanks, where there's more room to work with. So yeah, the armor layout on the Merk 3 could be much better despite using the AVDS, and the Namer proves it.
    wew lad >implying
    I'm mocking you for no having put in 30 minutes of critical thought on a subject close to your heart is what's going on.
    AAAAAAND WE HAVE A WINNER!
    Yes, the relevant parameter is the height of the powerpack as a function of longitudinal location.
    What's missing from the MTU catalog I posted is the cooling system for the engine- the MTU is liquid-cooled, as opposed to the AVDS, which as its name implies is air-cooled. The practical upshot of which is that the design of the cooling system is much more flexible, so that on the MTU powerpack for the Merk 4 the limiting factor is the height of the transmission, with the rest of the cooling being crammed in under the sloping deck rearwards, clearing up the needed volume. On the earlier Merks with the AVDS, the limiting factor is in fact the shroud for the frontal cooling fan on the engine, which is the exact height of the rear one- which is not exactly well-suited to cramming in under a sloping deck, necessitating the hump.
    Which is again not to say that the same hump coudn't have been significantly better protected than it is, but there is a reason it's there.
    Referte Avt Morimini.
    True, but any tank designed after TYOOL 1990 should ideally be designed with properly separated ammunition, but clearly the Merk 4 wasn't. Missed opportunities I suppose.
    Cause it really isn't the same. Also, seeing as the Merk isn't abroad very often, and a quick googling doesn't suggest that IDF tank crews get sent abroad to train like the paratroopers do, nor have very many foreign tanks been reported to have visited the Levant for cross-familiarization, I'd say that "close cooperation" needs some work.
    I see you are referring to the GPS. My bad, I thought you were referring to the commander's independent sight. Sorry, you are 100% correct regarding the location of the GPS.
    True, but that does not actually contradict what I said.
    Also if anything I've read about the Wadi Saluki battle is correct, the Merks were fine in terms of crew casualties when penetrated (except for when they kaboomed, but that's the case for any non-Abrams tank), but were surprisingly easily poked in the first place. Yes I know that included older Merks.
    So again this, and again it doesn't say what you says it does. In this case, they're talking about moving the air filters and batteries. Now, where did they sit in the older Merks?

    You see the yellow module on the side of the turret ring? the box underneath that is the air filter. As you can easily see, the width of the air filter means that the yellow module is greatly constrained in width, as is the red module aft of it, thanks to those stowage (and presumably battery) compartments.
    On the Merk 4, on the other hand:

    We see that the side modules are extra thick, and that there are cutaways on the aft of the hull, presumably to make room for the air filters. The stowage boxes along the side are likewise MIA to make room for the modules.
    So, as we see, this has nothing to do with the UFP as you claimed.
    You're supposed to know about the Merk, I shouldn't have to spoonfeed you this stuff.
    And you don't even have the excuse of reading this article you linked via the vagaries of Google Translate.
    lol no. All of those have a UFP armor module, which the mine plate sits on top of:

    See the module, with its 6 mounting bolts? Also, you can see the escape hatch under the driver's spot, so definitely no mine plate in this vehicle.
    The "horns" sticking out from under the module and welded to the hull are non-standard, but I strongly suspect that they're there to provide a good indexing point for the mine plate. This is what a Magach looks like with a mine plate attached:

    As you can see, the mine plate itself extends roughly up to the welded "horns".

    Another, with the horns visible and therefore no belly plate.

    Another view of what the belly plate looks like, so you can see that none (bar one) of the photos I linked in the last post had one. You can also see some LFP modules in this (sadly low-quality) pic.

    Another pic with the horns and the lower hull visible, no belly plate here!

    And one more because it's a nice pic with the bare lower hull peeking out and no mine plate in sight.
    And while we're at it, the Puma also has an armored LFP in addition to the mine plate.
    Without mine plate:



     
    And with:
    without armor modules:

    with both modules and mine plate:


     
    So yeah. Conclusion- the IDF has indeed up-armored the LFP of magachs (and that isn't just the mine plate adapter), and have also armored the LFPs of Pumas; or in other words, the IDF has not ignored the LFP when it comes to armoring rear-engined vehicles, whether MBTs or not. Git larned.
     
    I'm simply tired of the confident tone you use while spouting bullshit, and you deserve to be mocked for being so confidently wrong in great detail. And so here I am.
    If you want me to take you seriously and actually debate you need to stop being such a credulous individual when it comes to your pet statelet's products and y'know actually A. have sources B. that actually say what you say they do and C. Referte Avt Morimini.
    "I seem to remember reading this somewhere" holds no water, particularly when the only source you have presented hasn't said what you claimed it did.
    But I suppose neither of us will get what they want, eh?
  10. Metal
    N-L-M got a reaction from heretic88 in Israeli AFVs   
    Consider the geometry of actual armor without ignoring the LFP.
    In addition, the mass of the ammo is almost insignificant (25 kg per round and 40 or so rounds in the hull is 1 ton, vs 2 tons each for the engine and transmission plus fluids).
    That's not how tracked vehicles work, at all.
    You keep throwing this around without sourcing it. While I get that the Merk 4 is better protected than the previous ones, I'm interested in hearing what the actual professionals have to say.
    Also, the Namer shows that when sufficiently motivated even the Izzys can adequately place armor around an AVDS if we ignore the LFP as usual.
    The Mark 2D seems to show that the guys in charge disagree about the driver's visibility and armor on that side. On the engine side, continuing the hull line at the hump forwards to the beak instead of having it drop would make room for an armor module in front of the engine. That area is not in the FOV of the driver's central periscope nor in the FOV of the right one, which looks out over the engine deck.
    Please don't throw around things like this, they betray just how little you actually know.
    Let's compare the AVDS-1790-5A as found in the Merk 1 to the MTU 883 in the Merk 4, shall we?
    First, the AVDS:

    And then the MTU:

    Notice something? The AVDS is nominally approximately 4" longer. But that includes the turbo arrangement, which isn't included in the MTU engine dimensions. Once you include the turbo, the MTU 883 is longer.
    But wait, you say, the powerpack isn't only the engine! The Merks have used CD-850 Allsions and RK-304 and RK-325 Renk transmissions!
    So let's take a look at those now.
    First, the CD-850:

    Note that the depth of the transmission, 29", is approximately 730mm.
    next, the RK-304:

    and finally, the RK-325:
    https://www.renk-ag.com/en/products-and-service/products/vehicle-transmissions/rk-325/
    Dimensions: 1,910 x 830 x 960mm
    that's L*W*H.
    So, in fact, the RK-325 as found on the Merk 4 is longer than the transmissions in any previous Merk model, as is the MTU engine.
    So yeah, the "significant reduction in length of the powerpack unit" is a simple sign that you don't actually know what you're talking about, care to guess again?
    You should know the drill by now. Source this claim.
    You're zigzagging from "theres no problem with armoring the front along with the engine, slight weight bias forwards is a good thing" to "need to restore balance by uneven wheel spacing".
    Also that's not the only reason for having wheels spaced unevenly, care to guess what the other ones are?
    Again you're not bringing your A-game, step it up.
    2 has a new powertrain with the Renk RK304 transmission, which necessitated changing the entire engine deck area, exhaust routed into the coolant air exhaust manifold, as well as turret changes like the mortar and special armor slapped on.
    The drivetrain of the 2 is closer to that of the 3 than it is to the 1.
    Well you'd also expect them to realize that ammo separation is the objectively correct way to go, but I suppose you can't get everything.
    Also how exactly would you expect them to realize that the alternative is better when they don't have any experience with rear engine tanks newer than the M60A3, anyway?
    Reminder that the Merk 3 has a roof sight.
    There's a difference between making something work and it being a good idea which gives you what you actually want.
    Red is not russian, even if you can't tell Eastern European accents apart.
    What did the big bad Russians do to you anyway?
    You're dragging the forum discourse level and SNR waaay the fuck down with your shitposting, cease.
     
    Hybrids bring their own host of problems, not least requiring more volume and weight than equivalent mechanical transmissions. Also, why would you go to all the trouble of putting the drive sprockets in the front, if you decouple them from the engine? it's objectively a worse location for them.
    This bit we've been over before, and I'm just qouting it again to rub your face in how wrong it is and how you never bothered to perform 10 minutes of googling because you lack any self-critical thinking ability.
    You're gonna have to source this too, this claim in particular is interesting, as on the Merk the air filters were never in the way of the UFP in the first place!
    Aaaand you're confirmed for never having viewed anything through a camera resting above a hot surface.
    That's not only an incredibly asinine statement, considering how the IDF hasn't designed any rear-engine MBTs, but it's nevertheless still wrong:



     
    In short, @Mighty_Zuk, you have a lot of unsubstantiated claims to back up, Referte Avt Morimini.
    You've also said a lot of bullshit that betrays a basic and fundamental lack of understanding of the subject matter. Git larned, and kindly match the confidence displayed in your posts to your actual level of knowledge in the subject matter, and not to what you'd like others to believe it is. You are invited to step up your game and keep the baseless speculation and denial to other forums like AW, and refrain from overly nationalistic fanboyism.
    Also, if you don't know something, even in a field which is close to your heart, just admit it. there's no shame in not knowing shit, but there's quite a lot in pretending to know stuff you don't and being flat out wrong.
    Kindly raise the standard of your posting, we really don't want this place devolving into AW or worse, DFI. Which is unfortunately the current posting standard you are representing.
     
    Sure, if you like your tanks immobile.
     
  11. Metal
    N-L-M got a reaction from heretic88 in Israeli AFVs   
    While the video is indeed garbage, your rebuttal is as well.
    So your counterpoint to "the engine bay being hot and in the front is an issue with the Merk" is "It's more important and therefore it isn't an issue".
    If you actually bother to look at how the Merks 1-3 and the AVDS-1790 are put together, you would very quickly notice that the hottest air from the engine is blown straight onto the deck above (which on the Merk 1, 2, and early 3 would appear to only be solid steel, with no give-away bolt heads to indicate composite armor of any kind), and from there out the side louvers, sideways (and slightly back). if it were thrown down it would kick up clouds of dust.
    Steel is, of course, an extremely good conductor of heat, and this in turn means that if the lower surface gets hot, well, so too does the upper one. The thickness of this plate is, in fact, mostly irrelevant.
    Additionally, if you knew anything about other tanks which use the AVDS, you'd know that the entire purpose of the funky grating on the back of the M60 (and originally the M48A3 with the AVI-1790-8) is to reduce the IR signature. And yet despite that grating and exhaust tunnel design, the M60 retains a non-negligible IR signature. I strongly suggest reading what Hunnicutt has to say on the topic. To assume that the Merks 1-3, which squeeze more power out of what is effectively the same engine and therefore have more waste heat to remove, and have less grating area to permit airflow, somehow end up expelling colder air is plain fantasy.
    Unlike the Merk, the M60 spits out its hot exhaust rearwards, out of the line of sight, and therefore the exhaust grills are out of sight from the front. The Merk has its exhaust grills in the front arc of the tank, where they can clearly be seen (and of course the grills heat up to approximately the temperature of the exhaust air). On the Merk 1 it was waaaaay worse, as the engine combustion exhaust was just piped out to the sides and expelled there, resulting in a large patch of the vehicle which get hot enough to fry an egg on. On the later Merks the exhaust was routed to mix with the engine cooling air exhaust, indicating that this was a large enough problem that it needed to be solved.
    The later Merk 3 has a layered deck above the engine (if the bolt heads are anything to go by), and layers (particularly if they include air layers) are extremely good insulators, so that bit should be mostly ok now; the Merk 4 has both a layered deck and an MTU engine, in which the air flows the other way through the engine, from the top downwards and out the side. The Merk 4 also what looks like layered sponsons around the exhaust grate, which the 3 lacks; so that area too should be better off than it was. These tanks however also have solid steel hulls, which the engine can and does heat up through its mounting points (as you need pretty solid mounting points to hold down a 1000+HP diesel), and the hull extends forwards to the nose (and to the non-modular sponsons on the Merk 3), giving a large area in the front radiating away. It should also be noted that transmissions produce non-negligible quantities of waste heat, as do the brakes (torque converters too, yay viscous fluid shear), for obvious reasons; more so that the engine if you're doing anything other than standing still. And having those stacked right up close against the steel hull is asking for it to heat up.
     
    So yeah, handwaving away the heat from the automotive components being in front as "Not true"
    You wouldn't happen to have a single fact to back up that rather bold statement, would you? Like, a source of some kind?
    Regarding the pic you posted, there's a certain component that deserves some attention there. Specifically, the tires on the roadwheels. You may note, that they are white and therefore cold. Now, what do we know about roadwheels on tanks?
    hint: they ain't cold when the vehicle is moving:

    So by the fact that the wheels are cold, we know that the Merk you posted has not been moving, and indeed one cannot tell how long the engine has been running; nor can the LFP, which is by all accounts part of the steel hull, be seen. Using a photo such as that to demonstrate the effect of the engine on the thermal signature is disingenuous at best.
     
    The LFP is a thing on the Merk 4 too, you know; and considering how the rest of your treatment of this point is "I'd rather have a damaged engine", you're effectively trying to squirrel out of the fact that yes, the engine on the Merk is more vulnerable than it is on MBTs.
    Not if said conventional design had, y'know, armor there, like, I dunno, the Abrams or Leo 2.
    Again, do you have a single fact or source to back that opinion up?
    And, as usual, you are ignoring a much more vital component than the engine, care to guess what it is and why?
    In actual competently designed tanks post-1973 there are no fuel tanks in the crew compartment (excluding derivative designs which inherited them), so that's a bit of a moot point. Most modern tanks keep the fuel in the engine bay and/or the sponsons, and not in the front of the hull where armor belongs.
    I find that hard to believe, you wouldn't happen to have a source for that would you?
    Cause if we take that at face value, that would make the Merk the first tank designed without armor compromises since what, 1916?
    Also the multiple generations of modules and sideskirts spotted on Merks suggests that that is not actually the case.
    Of course another point that both you and Red missed is that tank armor is designed to meet a reference threat. What that threat is is a different question, but considering how Egypt, Jordan and Syria all operate tanks which fling APFSDS and which the Merk 4 is at least notionally supposed to be able to go up against and win, the idea that its armor doesn't at least do something against KE is laughable, to say the least. What the CE threat is is also an open question. Red also clearly doesn't get how "special" armors work against CE.
    Again, fact to back that up? Cause without a source, that's just meaningless handwaving.
    Cause even with the most modern turret modules seen on the Merk 4m, there doesn't seem to be any burster plate to prevent the blast from an ATGM disassembling the armor inside, the way we've all seen the pictures of it happening from 2006. If the declasified Brit Burlington docs are anything to go by, NERA arrays have trash multi-hit ability without burster plates, and there's no reason to believe the Izzys have some super duper sekrit sauce nobody else does to solve this problem.
    That's a very strong statement to throw around unsubstantiated. You wouldn't happen to have anything resembling a source to support this claim would you? Official claims that this is indeed the case? Product page on one of IMI's websites that claims this gun ever existed? pictures of a testbed with the gun?
    The last time I saw someone taking the claims of a 140mm gun on the Merk 4 seriously was back in the early 2000s, before the thing entered mass production, and even then it was presented as only being rumors and not thrown around as if it were a fact the way you're doing.
    Both these claims also need to be sourced.
    For reference, L/55 guns have a whole host of problems accompanying them, including balance issues, elevating mass and inertia, recoil impulse and length (same problem faced with more energetic ammo in L/44 guns), and so on. As part of the upgrade to the L/55 in the Leo (part of the A5 upgrade pack), the gun drives were replaced and the entire mantlet area redesigned -the newer mantlet is much narrower, and the gap is filled by armor boxes attached to the fixed turret structure, most likely to reduce the elevating mass and restore margins.
    L/55 guns are enough of a headache that the US seems to have decided to not go that route because of the problems the testbeds had with them. Handwaving away integration issues like this as "no biggie" is being deliberately ignorant.
    We've already been over the whole thermals business and that picture, but what I don't get is even if we assume you are correct and the Trophy antennae are a stronger radiator in the relevant wavelengths*, how is this greatly increased thermal signature a point in favor of the Merk?
    *even with extreme emissivity differences, I don't see how that could be the case. Comparing to a similar radar by the same manufacturer, I get 110W continuous power draw for the radars at most (comparing to the Elta EL/M-2129), as opposed to several hundred KW waste heat in the exhaust even at idle.
    A. You are aware that the wonders of modular armor mean that armor packages can be changed mid-batch, and that therefore doesn't make it a 4a/4b difference.
    B. If you think minor changes like that (and whatever internal changes to the armor module it covers) are enough to prevent the blast from a warhead shrekking the armor after a hit you're somewhere between deluded and hopeless.
     
    Before being a Democrat and blaming Russian propaganda, consider the following:
    1. Is it wrong? If it is correct, or at least has a good change of being so, crying "propaganda!" is a great way to discredit your viewpoint.
    2. Cui Bono? If the Russians don't stand to benefit (and indeed, what good does mocking the IR signature of an irrelevant third world country's tank does to the Russians), why would they waste their propaganda efforts on it?
    Kindly use your brain before posting.
    Also kindly try and keep your shitposting on this forum in full grammatically-correct sentences. 
  12. Tank You
    N-L-M got a reaction from Bronezhilet in Israeli AFVs   
    While the video is indeed garbage, your rebuttal is as well.
    So your counterpoint to "the engine bay being hot and in the front is an issue with the Merk" is "It's more important and therefore it isn't an issue".
    If you actually bother to look at how the Merks 1-3 and the AVDS-1790 are put together, you would very quickly notice that the hottest air from the engine is blown straight onto the deck above (which on the Merk 1, 2, and early 3 would appear to only be solid steel, with no give-away bolt heads to indicate composite armor of any kind), and from there out the side louvers, sideways (and slightly back). if it were thrown down it would kick up clouds of dust.
    Steel is, of course, an extremely good conductor of heat, and this in turn means that if the lower surface gets hot, well, so too does the upper one. The thickness of this plate is, in fact, mostly irrelevant.
    Additionally, if you knew anything about other tanks which use the AVDS, you'd know that the entire purpose of the funky grating on the back of the M60 (and originally the M48A3 with the AVI-1790-8) is to reduce the IR signature. And yet despite that grating and exhaust tunnel design, the M60 retains a non-negligible IR signature. I strongly suggest reading what Hunnicutt has to say on the topic. To assume that the Merks 1-3, which squeeze more power out of what is effectively the same engine and therefore have more waste heat to remove, and have less grating area to permit airflow, somehow end up expelling colder air is plain fantasy.
    Unlike the Merk, the M60 spits out its hot exhaust rearwards, out of the line of sight, and therefore the exhaust grills are out of sight from the front. The Merk has its exhaust grills in the front arc of the tank, where they can clearly be seen (and of course the grills heat up to approximately the temperature of the exhaust air). On the Merk 1 it was waaaaay worse, as the engine combustion exhaust was just piped out to the sides and expelled there, resulting in a large patch of the vehicle which get hot enough to fry an egg on. On the later Merks the exhaust was routed to mix with the engine cooling air exhaust, indicating that this was a large enough problem that it needed to be solved.
    The later Merk 3 has a layered deck above the engine (if the bolt heads are anything to go by), and layers (particularly if they include air layers) are extremely good insulators, so that bit should be mostly ok now; the Merk 4 has both a layered deck and an MTU engine, in which the air flows the other way through the engine, from the top downwards and out the side. The Merk 4 also what looks like layered sponsons around the exhaust grate, which the 3 lacks; so that area too should be better off than it was. These tanks however also have solid steel hulls, which the engine can and does heat up through its mounting points (as you need pretty solid mounting points to hold down a 1000+HP diesel), and the hull extends forwards to the nose (and to the non-modular sponsons on the Merk 3), giving a large area in the front radiating away. It should also be noted that transmissions produce non-negligible quantities of waste heat, as do the brakes (torque converters too, yay viscous fluid shear), for obvious reasons; more so that the engine if you're doing anything other than standing still. And having those stacked right up close against the steel hull is asking for it to heat up.
     
    So yeah, handwaving away the heat from the automotive components being in front as "Not true"
    You wouldn't happen to have a single fact to back up that rather bold statement, would you? Like, a source of some kind?
    Regarding the pic you posted, there's a certain component that deserves some attention there. Specifically, the tires on the roadwheels. You may note, that they are white and therefore cold. Now, what do we know about roadwheels on tanks?
    hint: they ain't cold when the vehicle is moving:

    So by the fact that the wheels are cold, we know that the Merk you posted has not been moving, and indeed one cannot tell how long the engine has been running; nor can the LFP, which is by all accounts part of the steel hull, be seen. Using a photo such as that to demonstrate the effect of the engine on the thermal signature is disingenuous at best.
     
    The LFP is a thing on the Merk 4 too, you know; and considering how the rest of your treatment of this point is "I'd rather have a damaged engine", you're effectively trying to squirrel out of the fact that yes, the engine on the Merk is more vulnerable than it is on MBTs.
    Not if said conventional design had, y'know, armor there, like, I dunno, the Abrams or Leo 2.
    Again, do you have a single fact or source to back that opinion up?
    And, as usual, you are ignoring a much more vital component than the engine, care to guess what it is and why?
    In actual competently designed tanks post-1973 there are no fuel tanks in the crew compartment (excluding derivative designs which inherited them), so that's a bit of a moot point. Most modern tanks keep the fuel in the engine bay and/or the sponsons, and not in the front of the hull where armor belongs.
    I find that hard to believe, you wouldn't happen to have a source for that would you?
    Cause if we take that at face value, that would make the Merk the first tank designed without armor compromises since what, 1916?
    Also the multiple generations of modules and sideskirts spotted on Merks suggests that that is not actually the case.
    Of course another point that both you and Red missed is that tank armor is designed to meet a reference threat. What that threat is is a different question, but considering how Egypt, Jordan and Syria all operate tanks which fling APFSDS and which the Merk 4 is at least notionally supposed to be able to go up against and win, the idea that its armor doesn't at least do something against KE is laughable, to say the least. What the CE threat is is also an open question. Red also clearly doesn't get how "special" armors work against CE.
    Again, fact to back that up? Cause without a source, that's just meaningless handwaving.
    Cause even with the most modern turret modules seen on the Merk 4m, there doesn't seem to be any burster plate to prevent the blast from an ATGM disassembling the armor inside, the way we've all seen the pictures of it happening from 2006. If the declasified Brit Burlington docs are anything to go by, NERA arrays have trash multi-hit ability without burster plates, and there's no reason to believe the Izzys have some super duper sekrit sauce nobody else does to solve this problem.
    That's a very strong statement to throw around unsubstantiated. You wouldn't happen to have anything resembling a source to support this claim would you? Official claims that this is indeed the case? Product page on one of IMI's websites that claims this gun ever existed? pictures of a testbed with the gun?
    The last time I saw someone taking the claims of a 140mm gun on the Merk 4 seriously was back in the early 2000s, before the thing entered mass production, and even then it was presented as only being rumors and not thrown around as if it were a fact the way you're doing.
    Both these claims also need to be sourced.
    For reference, L/55 guns have a whole host of problems accompanying them, including balance issues, elevating mass and inertia, recoil impulse and length (same problem faced with more energetic ammo in L/44 guns), and so on. As part of the upgrade to the L/55 in the Leo (part of the A5 upgrade pack), the gun drives were replaced and the entire mantlet area redesigned -the newer mantlet is much narrower, and the gap is filled by armor boxes attached to the fixed turret structure, most likely to reduce the elevating mass and restore margins.
    L/55 guns are enough of a headache that the US seems to have decided to not go that route because of the problems the testbeds had with them. Handwaving away integration issues like this as "no biggie" is being deliberately ignorant.
    We've already been over the whole thermals business and that picture, but what I don't get is even if we assume you are correct and the Trophy antennae are a stronger radiator in the relevant wavelengths*, how is this greatly increased thermal signature a point in favor of the Merk?
    *even with extreme emissivity differences, I don't see how that could be the case. Comparing to a similar radar by the same manufacturer, I get 110W continuous power draw for the radars at most (comparing to the Elta EL/M-2129), as opposed to several hundred KW waste heat in the exhaust even at idle.
    A. You are aware that the wonders of modular armor mean that armor packages can be changed mid-batch, and that therefore doesn't make it a 4a/4b difference.
    B. If you think minor changes like that (and whatever internal changes to the armor module it covers) are enough to prevent the blast from a warhead shrekking the armor after a hit you're somewhere between deluded and hopeless.
     
    Before being a Democrat and blaming Russian propaganda, consider the following:
    1. Is it wrong? If it is correct, or at least has a good change of being so, crying "propaganda!" is a great way to discredit your viewpoint.
    2. Cui Bono? If the Russians don't stand to benefit (and indeed, what good does mocking the IR signature of an irrelevant third world country's tank does to the Russians), why would they waste their propaganda efforts on it?
    Kindly use your brain before posting.
    Also kindly try and keep your shitposting on this forum in full grammatically-correct sentences. 
  13. Tank You
    N-L-M got a reaction from Bronezhilet in Israeli AFVs   
    Consider the geometry of actual armor without ignoring the LFP.
    In addition, the mass of the ammo is almost insignificant (25 kg per round and 40 or so rounds in the hull is 1 ton, vs 2 tons each for the engine and transmission plus fluids).
    That's not how tracked vehicles work, at all.
    You keep throwing this around without sourcing it. While I get that the Merk 4 is better protected than the previous ones, I'm interested in hearing what the actual professionals have to say.
    Also, the Namer shows that when sufficiently motivated even the Izzys can adequately place armor around an AVDS if we ignore the LFP as usual.
    The Mark 2D seems to show that the guys in charge disagree about the driver's visibility and armor on that side. On the engine side, continuing the hull line at the hump forwards to the beak instead of having it drop would make room for an armor module in front of the engine. That area is not in the FOV of the driver's central periscope nor in the FOV of the right one, which looks out over the engine deck.
    Please don't throw around things like this, they betray just how little you actually know.
    Let's compare the AVDS-1790-5A as found in the Merk 1 to the MTU 883 in the Merk 4, shall we?
    First, the AVDS:

    And then the MTU:

    Notice something? The AVDS is nominally approximately 4" longer. But that includes the turbo arrangement, which isn't included in the MTU engine dimensions. Once you include the turbo, the MTU 883 is longer.
    But wait, you say, the powerpack isn't only the engine! The Merks have used CD-850 Allsions and RK-304 and RK-325 Renk transmissions!
    So let's take a look at those now.
    First, the CD-850:

    Note that the depth of the transmission, 29", is approximately 730mm.
    next, the RK-304:

    and finally, the RK-325:
    https://www.renk-ag.com/en/products-and-service/products/vehicle-transmissions/rk-325/
    Dimensions: 1,910 x 830 x 960mm
    that's L*W*H.
    So, in fact, the RK-325 as found on the Merk 4 is longer than the transmissions in any previous Merk model, as is the MTU engine.
    So yeah, the "significant reduction in length of the powerpack unit" is a simple sign that you don't actually know what you're talking about, care to guess again?
    You should know the drill by now. Source this claim.
    You're zigzagging from "theres no problem with armoring the front along with the engine, slight weight bias forwards is a good thing" to "need to restore balance by uneven wheel spacing".
    Also that's not the only reason for having wheels spaced unevenly, care to guess what the other ones are?
    Again you're not bringing your A-game, step it up.
    2 has a new powertrain with the Renk RK304 transmission, which necessitated changing the entire engine deck area, exhaust routed into the coolant air exhaust manifold, as well as turret changes like the mortar and special armor slapped on.
    The drivetrain of the 2 is closer to that of the 3 than it is to the 1.
    Well you'd also expect them to realize that ammo separation is the objectively correct way to go, but I suppose you can't get everything.
    Also how exactly would you expect them to realize that the alternative is better when they don't have any experience with rear engine tanks newer than the M60A3, anyway?
    Reminder that the Merk 3 has a roof sight.
    There's a difference between making something work and it being a good idea which gives you what you actually want.
    Red is not russian, even if you can't tell Eastern European accents apart.
    What did the big bad Russians do to you anyway?
    You're dragging the forum discourse level and SNR waaay the fuck down with your shitposting, cease.
     
    Hybrids bring their own host of problems, not least requiring more volume and weight than equivalent mechanical transmissions. Also, why would you go to all the trouble of putting the drive sprockets in the front, if you decouple them from the engine? it's objectively a worse location for them.
    This bit we've been over before, and I'm just qouting it again to rub your face in how wrong it is and how you never bothered to perform 10 minutes of googling because you lack any self-critical thinking ability.
    You're gonna have to source this too, this claim in particular is interesting, as on the Merk the air filters were never in the way of the UFP in the first place!
    Aaaand you're confirmed for never having viewed anything through a camera resting above a hot surface.
    That's not only an incredibly asinine statement, considering how the IDF hasn't designed any rear-engine MBTs, but it's nevertheless still wrong:



     
    In short, @Mighty_Zuk, you have a lot of unsubstantiated claims to back up, Referte Avt Morimini.
    You've also said a lot of bullshit that betrays a basic and fundamental lack of understanding of the subject matter. Git larned, and kindly match the confidence displayed in your posts to your actual level of knowledge in the subject matter, and not to what you'd like others to believe it is. You are invited to step up your game and keep the baseless speculation and denial to other forums like AW, and refrain from overly nationalistic fanboyism.
    Also, if you don't know something, even in a field which is close to your heart, just admit it. there's no shame in not knowing shit, but there's quite a lot in pretending to know stuff you don't and being flat out wrong.
    Kindly raise the standard of your posting, we really don't want this place devolving into AW or worse, DFI. Which is unfortunately the current posting standard you are representing.
     
    Sure, if you like your tanks immobile.
     
  14. Tank You
    N-L-M got a reaction from Serge in Israeli AFVs   
    The 2 is what the 1 always should have been IMO. Based on what @Walter_Sobchakhad to say about it, the reason the Merk 1 had the CD850 was that Allison were being shitters and not cooperating with Continental on newer better transmissions for tanks at the time, and the Izzys had to then go to Renk for assistance.
    The Merk 2 also benefits from being a few years later and incorporating some lessons learned from the fielding of the Merk 1 (both field trials and combat), but on the whole the 2 is the M1IP to the Merk 1's M1. (And in this analogy the Merk 3 is the M1A1, the Merk 3 Baz is the M1A1 AIM and the Merk 4 is the M1A2 with the Barak being the M1A2C, but this whole analogy is a bit of a stretch).
  15. Metal
    N-L-M got a reaction from Serge in Israeli AFVs   
    Consider the geometry of actual armor without ignoring the LFP.
    In addition, the mass of the ammo is almost insignificant (25 kg per round and 40 or so rounds in the hull is 1 ton, vs 2 tons each for the engine and transmission plus fluids).
    That's not how tracked vehicles work, at all.
    You keep throwing this around without sourcing it. While I get that the Merk 4 is better protected than the previous ones, I'm interested in hearing what the actual professionals have to say.
    Also, the Namer shows that when sufficiently motivated even the Izzys can adequately place armor around an AVDS if we ignore the LFP as usual.
    The Mark 2D seems to show that the guys in charge disagree about the driver's visibility and armor on that side. On the engine side, continuing the hull line at the hump forwards to the beak instead of having it drop would make room for an armor module in front of the engine. That area is not in the FOV of the driver's central periscope nor in the FOV of the right one, which looks out over the engine deck.
    Please don't throw around things like this, they betray just how little you actually know.
    Let's compare the AVDS-1790-5A as found in the Merk 1 to the MTU 883 in the Merk 4, shall we?
    First, the AVDS:

    And then the MTU:

    Notice something? The AVDS is nominally approximately 4" longer. But that includes the turbo arrangement, which isn't included in the MTU engine dimensions. Once you include the turbo, the MTU 883 is longer.
    But wait, you say, the powerpack isn't only the engine! The Merks have used CD-850 Allsions and RK-304 and RK-325 Renk transmissions!
    So let's take a look at those now.
    First, the CD-850:

    Note that the depth of the transmission, 29", is approximately 730mm.
    next, the RK-304:

    and finally, the RK-325:
    https://www.renk-ag.com/en/products-and-service/products/vehicle-transmissions/rk-325/
    Dimensions: 1,910 x 830 x 960mm
    that's L*W*H.
    So, in fact, the RK-325 as found on the Merk 4 is longer than the transmissions in any previous Merk model, as is the MTU engine.
    So yeah, the "significant reduction in length of the powerpack unit" is a simple sign that you don't actually know what you're talking about, care to guess again?
    You should know the drill by now. Source this claim.
    You're zigzagging from "theres no problem with armoring the front along with the engine, slight weight bias forwards is a good thing" to "need to restore balance by uneven wheel spacing".
    Also that's not the only reason for having wheels spaced unevenly, care to guess what the other ones are?
    Again you're not bringing your A-game, step it up.
    2 has a new powertrain with the Renk RK304 transmission, which necessitated changing the entire engine deck area, exhaust routed into the coolant air exhaust manifold, as well as turret changes like the mortar and special armor slapped on.
    The drivetrain of the 2 is closer to that of the 3 than it is to the 1.
    Well you'd also expect them to realize that ammo separation is the objectively correct way to go, but I suppose you can't get everything.
    Also how exactly would you expect them to realize that the alternative is better when they don't have any experience with rear engine tanks newer than the M60A3, anyway?
    Reminder that the Merk 3 has a roof sight.
    There's a difference between making something work and it being a good idea which gives you what you actually want.
    Red is not russian, even if you can't tell Eastern European accents apart.
    What did the big bad Russians do to you anyway?
    You're dragging the forum discourse level and SNR waaay the fuck down with your shitposting, cease.
     
    Hybrids bring their own host of problems, not least requiring more volume and weight than equivalent mechanical transmissions. Also, why would you go to all the trouble of putting the drive sprockets in the front, if you decouple them from the engine? it's objectively a worse location for them.
    This bit we've been over before, and I'm just qouting it again to rub your face in how wrong it is and how you never bothered to perform 10 minutes of googling because you lack any self-critical thinking ability.
    You're gonna have to source this too, this claim in particular is interesting, as on the Merk the air filters were never in the way of the UFP in the first place!
    Aaaand you're confirmed for never having viewed anything through a camera resting above a hot surface.
    That's not only an incredibly asinine statement, considering how the IDF hasn't designed any rear-engine MBTs, but it's nevertheless still wrong:



     
    In short, @Mighty_Zuk, you have a lot of unsubstantiated claims to back up, Referte Avt Morimini.
    You've also said a lot of bullshit that betrays a basic and fundamental lack of understanding of the subject matter. Git larned, and kindly match the confidence displayed in your posts to your actual level of knowledge in the subject matter, and not to what you'd like others to believe it is. You are invited to step up your game and keep the baseless speculation and denial to other forums like AW, and refrain from overly nationalistic fanboyism.
    Also, if you don't know something, even in a field which is close to your heart, just admit it. there's no shame in not knowing shit, but there's quite a lot in pretending to know stuff you don't and being flat out wrong.
    Kindly raise the standard of your posting, we really don't want this place devolving into AW or worse, DFI. Which is unfortunately the current posting standard you are representing.
     
    Sure, if you like your tanks immobile.
     
  16. Metal
    N-L-M got a reaction from Serge in Israeli AFVs   
    While the video is indeed garbage, your rebuttal is as well.
    So your counterpoint to "the engine bay being hot and in the front is an issue with the Merk" is "It's more important and therefore it isn't an issue".
    If you actually bother to look at how the Merks 1-3 and the AVDS-1790 are put together, you would very quickly notice that the hottest air from the engine is blown straight onto the deck above (which on the Merk 1, 2, and early 3 would appear to only be solid steel, with no give-away bolt heads to indicate composite armor of any kind), and from there out the side louvers, sideways (and slightly back). if it were thrown down it would kick up clouds of dust.
    Steel is, of course, an extremely good conductor of heat, and this in turn means that if the lower surface gets hot, well, so too does the upper one. The thickness of this plate is, in fact, mostly irrelevant.
    Additionally, if you knew anything about other tanks which use the AVDS, you'd know that the entire purpose of the funky grating on the back of the M60 (and originally the M48A3 with the AVI-1790-8) is to reduce the IR signature. And yet despite that grating and exhaust tunnel design, the M60 retains a non-negligible IR signature. I strongly suggest reading what Hunnicutt has to say on the topic. To assume that the Merks 1-3, which squeeze more power out of what is effectively the same engine and therefore have more waste heat to remove, and have less grating area to permit airflow, somehow end up expelling colder air is plain fantasy.
    Unlike the Merk, the M60 spits out its hot exhaust rearwards, out of the line of sight, and therefore the exhaust grills are out of sight from the front. The Merk has its exhaust grills in the front arc of the tank, where they can clearly be seen (and of course the grills heat up to approximately the temperature of the exhaust air). On the Merk 1 it was waaaaay worse, as the engine combustion exhaust was just piped out to the sides and expelled there, resulting in a large patch of the vehicle which get hot enough to fry an egg on. On the later Merks the exhaust was routed to mix with the engine cooling air exhaust, indicating that this was a large enough problem that it needed to be solved.
    The later Merk 3 has a layered deck above the engine (if the bolt heads are anything to go by), and layers (particularly if they include air layers) are extremely good insulators, so that bit should be mostly ok now; the Merk 4 has both a layered deck and an MTU engine, in which the air flows the other way through the engine, from the top downwards and out the side. The Merk 4 also what looks like layered sponsons around the exhaust grate, which the 3 lacks; so that area too should be better off than it was. These tanks however also have solid steel hulls, which the engine can and does heat up through its mounting points (as you need pretty solid mounting points to hold down a 1000+HP diesel), and the hull extends forwards to the nose (and to the non-modular sponsons on the Merk 3), giving a large area in the front radiating away. It should also be noted that transmissions produce non-negligible quantities of waste heat, as do the brakes (torque converters too, yay viscous fluid shear), for obvious reasons; more so that the engine if you're doing anything other than standing still. And having those stacked right up close against the steel hull is asking for it to heat up.
     
    So yeah, handwaving away the heat from the automotive components being in front as "Not true"
    You wouldn't happen to have a single fact to back up that rather bold statement, would you? Like, a source of some kind?
    Regarding the pic you posted, there's a certain component that deserves some attention there. Specifically, the tires on the roadwheels. You may note, that they are white and therefore cold. Now, what do we know about roadwheels on tanks?
    hint: they ain't cold when the vehicle is moving:

    So by the fact that the wheels are cold, we know that the Merk you posted has not been moving, and indeed one cannot tell how long the engine has been running; nor can the LFP, which is by all accounts part of the steel hull, be seen. Using a photo such as that to demonstrate the effect of the engine on the thermal signature is disingenuous at best.
     
    The LFP is a thing on the Merk 4 too, you know; and considering how the rest of your treatment of this point is "I'd rather have a damaged engine", you're effectively trying to squirrel out of the fact that yes, the engine on the Merk is more vulnerable than it is on MBTs.
    Not if said conventional design had, y'know, armor there, like, I dunno, the Abrams or Leo 2.
    Again, do you have a single fact or source to back that opinion up?
    And, as usual, you are ignoring a much more vital component than the engine, care to guess what it is and why?
    In actual competently designed tanks post-1973 there are no fuel tanks in the crew compartment (excluding derivative designs which inherited them), so that's a bit of a moot point. Most modern tanks keep the fuel in the engine bay and/or the sponsons, and not in the front of the hull where armor belongs.
    I find that hard to believe, you wouldn't happen to have a source for that would you?
    Cause if we take that at face value, that would make the Merk the first tank designed without armor compromises since what, 1916?
    Also the multiple generations of modules and sideskirts spotted on Merks suggests that that is not actually the case.
    Of course another point that both you and Red missed is that tank armor is designed to meet a reference threat. What that threat is is a different question, but considering how Egypt, Jordan and Syria all operate tanks which fling APFSDS and which the Merk 4 is at least notionally supposed to be able to go up against and win, the idea that its armor doesn't at least do something against KE is laughable, to say the least. What the CE threat is is also an open question. Red also clearly doesn't get how "special" armors work against CE.
    Again, fact to back that up? Cause without a source, that's just meaningless handwaving.
    Cause even with the most modern turret modules seen on the Merk 4m, there doesn't seem to be any burster plate to prevent the blast from an ATGM disassembling the armor inside, the way we've all seen the pictures of it happening from 2006. If the declasified Brit Burlington docs are anything to go by, NERA arrays have trash multi-hit ability without burster plates, and there's no reason to believe the Izzys have some super duper sekrit sauce nobody else does to solve this problem.
    That's a very strong statement to throw around unsubstantiated. You wouldn't happen to have anything resembling a source to support this claim would you? Official claims that this is indeed the case? Product page on one of IMI's websites that claims this gun ever existed? pictures of a testbed with the gun?
    The last time I saw someone taking the claims of a 140mm gun on the Merk 4 seriously was back in the early 2000s, before the thing entered mass production, and even then it was presented as only being rumors and not thrown around as if it were a fact the way you're doing.
    Both these claims also need to be sourced.
    For reference, L/55 guns have a whole host of problems accompanying them, including balance issues, elevating mass and inertia, recoil impulse and length (same problem faced with more energetic ammo in L/44 guns), and so on. As part of the upgrade to the L/55 in the Leo (part of the A5 upgrade pack), the gun drives were replaced and the entire mantlet area redesigned -the newer mantlet is much narrower, and the gap is filled by armor boxes attached to the fixed turret structure, most likely to reduce the elevating mass and restore margins.
    L/55 guns are enough of a headache that the US seems to have decided to not go that route because of the problems the testbeds had with them. Handwaving away integration issues like this as "no biggie" is being deliberately ignorant.
    We've already been over the whole thermals business and that picture, but what I don't get is even if we assume you are correct and the Trophy antennae are a stronger radiator in the relevant wavelengths*, how is this greatly increased thermal signature a point in favor of the Merk?
    *even with extreme emissivity differences, I don't see how that could be the case. Comparing to a similar radar by the same manufacturer, I get 110W continuous power draw for the radars at most (comparing to the Elta EL/M-2129), as opposed to several hundred KW waste heat in the exhaust even at idle.
    A. You are aware that the wonders of modular armor mean that armor packages can be changed mid-batch, and that therefore doesn't make it a 4a/4b difference.
    B. If you think minor changes like that (and whatever internal changes to the armor module it covers) are enough to prevent the blast from a warhead shrekking the armor after a hit you're somewhere between deluded and hopeless.
     
    Before being a Democrat and blaming Russian propaganda, consider the following:
    1. Is it wrong? If it is correct, or at least has a good change of being so, crying "propaganda!" is a great way to discredit your viewpoint.
    2. Cui Bono? If the Russians don't stand to benefit (and indeed, what good does mocking the IR signature of an irrelevant third world country's tank does to the Russians), why would they waste their propaganda efforts on it?
    Kindly use your brain before posting.
    Also kindly try and keep your shitposting on this forum in full grammatically-correct sentences. 
  17. Tank You
    N-L-M got a reaction from LoooSeR in Israeli AFVs   
    Consider the geometry of actual armor without ignoring the LFP.
    In addition, the mass of the ammo is almost insignificant (25 kg per round and 40 or so rounds in the hull is 1 ton, vs 2 tons each for the engine and transmission plus fluids).
    That's not how tracked vehicles work, at all.
    You keep throwing this around without sourcing it. While I get that the Merk 4 is better protected than the previous ones, I'm interested in hearing what the actual professionals have to say.
    Also, the Namer shows that when sufficiently motivated even the Izzys can adequately place armor around an AVDS if we ignore the LFP as usual.
    The Mark 2D seems to show that the guys in charge disagree about the driver's visibility and armor on that side. On the engine side, continuing the hull line at the hump forwards to the beak instead of having it drop would make room for an armor module in front of the engine. That area is not in the FOV of the driver's central periscope nor in the FOV of the right one, which looks out over the engine deck.
    Please don't throw around things like this, they betray just how little you actually know.
    Let's compare the AVDS-1790-5A as found in the Merk 1 to the MTU 883 in the Merk 4, shall we?
    First, the AVDS:

    And then the MTU:

    Notice something? The AVDS is nominally approximately 4" longer. But that includes the turbo arrangement, which isn't included in the MTU engine dimensions. Once you include the turbo, the MTU 883 is longer.
    But wait, you say, the powerpack isn't only the engine! The Merks have used CD-850 Allsions and RK-304 and RK-325 Renk transmissions!
    So let's take a look at those now.
    First, the CD-850:

    Note that the depth of the transmission, 29", is approximately 730mm.
    next, the RK-304:

    and finally, the RK-325:
    https://www.renk-ag.com/en/products-and-service/products/vehicle-transmissions/rk-325/
    Dimensions: 1,910 x 830 x 960mm
    that's L*W*H.
    So, in fact, the RK-325 as found on the Merk 4 is longer than the transmissions in any previous Merk model, as is the MTU engine.
    So yeah, the "significant reduction in length of the powerpack unit" is a simple sign that you don't actually know what you're talking about, care to guess again?
    You should know the drill by now. Source this claim.
    You're zigzagging from "theres no problem with armoring the front along with the engine, slight weight bias forwards is a good thing" to "need to restore balance by uneven wheel spacing".
    Also that's not the only reason for having wheels spaced unevenly, care to guess what the other ones are?
    Again you're not bringing your A-game, step it up.
    2 has a new powertrain with the Renk RK304 transmission, which necessitated changing the entire engine deck area, exhaust routed into the coolant air exhaust manifold, as well as turret changes like the mortar and special armor slapped on.
    The drivetrain of the 2 is closer to that of the 3 than it is to the 1.
    Well you'd also expect them to realize that ammo separation is the objectively correct way to go, but I suppose you can't get everything.
    Also how exactly would you expect them to realize that the alternative is better when they don't have any experience with rear engine tanks newer than the M60A3, anyway?
    Reminder that the Merk 3 has a roof sight.
    There's a difference between making something work and it being a good idea which gives you what you actually want.
    Red is not russian, even if you can't tell Eastern European accents apart.
    What did the big bad Russians do to you anyway?
    You're dragging the forum discourse level and SNR waaay the fuck down with your shitposting, cease.
     
    Hybrids bring their own host of problems, not least requiring more volume and weight than equivalent mechanical transmissions. Also, why would you go to all the trouble of putting the drive sprockets in the front, if you decouple them from the engine? it's objectively a worse location for them.
    This bit we've been over before, and I'm just qouting it again to rub your face in how wrong it is and how you never bothered to perform 10 minutes of googling because you lack any self-critical thinking ability.
    You're gonna have to source this too, this claim in particular is interesting, as on the Merk the air filters were never in the way of the UFP in the first place!
    Aaaand you're confirmed for never having viewed anything through a camera resting above a hot surface.
    That's not only an incredibly asinine statement, considering how the IDF hasn't designed any rear-engine MBTs, but it's nevertheless still wrong:



     
    In short, @Mighty_Zuk, you have a lot of unsubstantiated claims to back up, Referte Avt Morimini.
    You've also said a lot of bullshit that betrays a basic and fundamental lack of understanding of the subject matter. Git larned, and kindly match the confidence displayed in your posts to your actual level of knowledge in the subject matter, and not to what you'd like others to believe it is. You are invited to step up your game and keep the baseless speculation and denial to other forums like AW, and refrain from overly nationalistic fanboyism.
    Also, if you don't know something, even in a field which is close to your heart, just admit it. there's no shame in not knowing shit, but there's quite a lot in pretending to know stuff you don't and being flat out wrong.
    Kindly raise the standard of your posting, we really don't want this place devolving into AW or worse, DFI. Which is unfortunately the current posting standard you are representing.
     
    Sure, if you like your tanks immobile.
     
  18. Tank You
    N-L-M got a reaction from Volkswagen in Israeli AFVs   
    Consider the geometry of actual armor without ignoring the LFP.
    In addition, the mass of the ammo is almost insignificant (25 kg per round and 40 or so rounds in the hull is 1 ton, vs 2 tons each for the engine and transmission plus fluids).
    That's not how tracked vehicles work, at all.
    You keep throwing this around without sourcing it. While I get that the Merk 4 is better protected than the previous ones, I'm interested in hearing what the actual professionals have to say.
    Also, the Namer shows that when sufficiently motivated even the Izzys can adequately place armor around an AVDS if we ignore the LFP as usual.
    The Mark 2D seems to show that the guys in charge disagree about the driver's visibility and armor on that side. On the engine side, continuing the hull line at the hump forwards to the beak instead of having it drop would make room for an armor module in front of the engine. That area is not in the FOV of the driver's central periscope nor in the FOV of the right one, which looks out over the engine deck.
    Please don't throw around things like this, they betray just how little you actually know.
    Let's compare the AVDS-1790-5A as found in the Merk 1 to the MTU 883 in the Merk 4, shall we?
    First, the AVDS:

    And then the MTU:

    Notice something? The AVDS is nominally approximately 4" longer. But that includes the turbo arrangement, which isn't included in the MTU engine dimensions. Once you include the turbo, the MTU 883 is longer.
    But wait, you say, the powerpack isn't only the engine! The Merks have used CD-850 Allsions and RK-304 and RK-325 Renk transmissions!
    So let's take a look at those now.
    First, the CD-850:

    Note that the depth of the transmission, 29", is approximately 730mm.
    next, the RK-304:

    and finally, the RK-325:
    https://www.renk-ag.com/en/products-and-service/products/vehicle-transmissions/rk-325/
    Dimensions: 1,910 x 830 x 960mm
    that's L*W*H.
    So, in fact, the RK-325 as found on the Merk 4 is longer than the transmissions in any previous Merk model, as is the MTU engine.
    So yeah, the "significant reduction in length of the powerpack unit" is a simple sign that you don't actually know what you're talking about, care to guess again?
    You should know the drill by now. Source this claim.
    You're zigzagging from "theres no problem with armoring the front along with the engine, slight weight bias forwards is a good thing" to "need to restore balance by uneven wheel spacing".
    Also that's not the only reason for having wheels spaced unevenly, care to guess what the other ones are?
    Again you're not bringing your A-game, step it up.
    2 has a new powertrain with the Renk RK304 transmission, which necessitated changing the entire engine deck area, exhaust routed into the coolant air exhaust manifold, as well as turret changes like the mortar and special armor slapped on.
    The drivetrain of the 2 is closer to that of the 3 than it is to the 1.
    Well you'd also expect them to realize that ammo separation is the objectively correct way to go, but I suppose you can't get everything.
    Also how exactly would you expect them to realize that the alternative is better when they don't have any experience with rear engine tanks newer than the M60A3, anyway?
    Reminder that the Merk 3 has a roof sight.
    There's a difference between making something work and it being a good idea which gives you what you actually want.
    Red is not russian, even if you can't tell Eastern European accents apart.
    What did the big bad Russians do to you anyway?
    You're dragging the forum discourse level and SNR waaay the fuck down with your shitposting, cease.
     
    Hybrids bring their own host of problems, not least requiring more volume and weight than equivalent mechanical transmissions. Also, why would you go to all the trouble of putting the drive sprockets in the front, if you decouple them from the engine? it's objectively a worse location for them.
    This bit we've been over before, and I'm just qouting it again to rub your face in how wrong it is and how you never bothered to perform 10 minutes of googling because you lack any self-critical thinking ability.
    You're gonna have to source this too, this claim in particular is interesting, as on the Merk the air filters were never in the way of the UFP in the first place!
    Aaaand you're confirmed for never having viewed anything through a camera resting above a hot surface.
    That's not only an incredibly asinine statement, considering how the IDF hasn't designed any rear-engine MBTs, but it's nevertheless still wrong:



     
    In short, @Mighty_Zuk, you have a lot of unsubstantiated claims to back up, Referte Avt Morimini.
    You've also said a lot of bullshit that betrays a basic and fundamental lack of understanding of the subject matter. Git larned, and kindly match the confidence displayed in your posts to your actual level of knowledge in the subject matter, and not to what you'd like others to believe it is. You are invited to step up your game and keep the baseless speculation and denial to other forums like AW, and refrain from overly nationalistic fanboyism.
    Also, if you don't know something, even in a field which is close to your heart, just admit it. there's no shame in not knowing shit, but there's quite a lot in pretending to know stuff you don't and being flat out wrong.
    Kindly raise the standard of your posting, we really don't want this place devolving into AW or worse, DFI. Which is unfortunately the current posting standard you are representing.
     
    Sure, if you like your tanks immobile.
     
  19. Tank You
    N-L-M got a reaction from Volkswagen in Israeli AFVs   
    While the video is indeed garbage, your rebuttal is as well.
    So your counterpoint to "the engine bay being hot and in the front is an issue with the Merk" is "It's more important and therefore it isn't an issue".
    If you actually bother to look at how the Merks 1-3 and the AVDS-1790 are put together, you would very quickly notice that the hottest air from the engine is blown straight onto the deck above (which on the Merk 1, 2, and early 3 would appear to only be solid steel, with no give-away bolt heads to indicate composite armor of any kind), and from there out the side louvers, sideways (and slightly back). if it were thrown down it would kick up clouds of dust.
    Steel is, of course, an extremely good conductor of heat, and this in turn means that if the lower surface gets hot, well, so too does the upper one. The thickness of this plate is, in fact, mostly irrelevant.
    Additionally, if you knew anything about other tanks which use the AVDS, you'd know that the entire purpose of the funky grating on the back of the M60 (and originally the M48A3 with the AVI-1790-8) is to reduce the IR signature. And yet despite that grating and exhaust tunnel design, the M60 retains a non-negligible IR signature. I strongly suggest reading what Hunnicutt has to say on the topic. To assume that the Merks 1-3, which squeeze more power out of what is effectively the same engine and therefore have more waste heat to remove, and have less grating area to permit airflow, somehow end up expelling colder air is plain fantasy.
    Unlike the Merk, the M60 spits out its hot exhaust rearwards, out of the line of sight, and therefore the exhaust grills are out of sight from the front. The Merk has its exhaust grills in the front arc of the tank, where they can clearly be seen (and of course the grills heat up to approximately the temperature of the exhaust air). On the Merk 1 it was waaaaay worse, as the engine combustion exhaust was just piped out to the sides and expelled there, resulting in a large patch of the vehicle which get hot enough to fry an egg on. On the later Merks the exhaust was routed to mix with the engine cooling air exhaust, indicating that this was a large enough problem that it needed to be solved.
    The later Merk 3 has a layered deck above the engine (if the bolt heads are anything to go by), and layers (particularly if they include air layers) are extremely good insulators, so that bit should be mostly ok now; the Merk 4 has both a layered deck and an MTU engine, in which the air flows the other way through the engine, from the top downwards and out the side. The Merk 4 also what looks like layered sponsons around the exhaust grate, which the 3 lacks; so that area too should be better off than it was. These tanks however also have solid steel hulls, which the engine can and does heat up through its mounting points (as you need pretty solid mounting points to hold down a 1000+HP diesel), and the hull extends forwards to the nose (and to the non-modular sponsons on the Merk 3), giving a large area in the front radiating away. It should also be noted that transmissions produce non-negligible quantities of waste heat, as do the brakes (torque converters too, yay viscous fluid shear), for obvious reasons; more so that the engine if you're doing anything other than standing still. And having those stacked right up close against the steel hull is asking for it to heat up.
     
    So yeah, handwaving away the heat from the automotive components being in front as "Not true"
    You wouldn't happen to have a single fact to back up that rather bold statement, would you? Like, a source of some kind?
    Regarding the pic you posted, there's a certain component that deserves some attention there. Specifically, the tires on the roadwheels. You may note, that they are white and therefore cold. Now, what do we know about roadwheels on tanks?
    hint: they ain't cold when the vehicle is moving:

    So by the fact that the wheels are cold, we know that the Merk you posted has not been moving, and indeed one cannot tell how long the engine has been running; nor can the LFP, which is by all accounts part of the steel hull, be seen. Using a photo such as that to demonstrate the effect of the engine on the thermal signature is disingenuous at best.
     
    The LFP is a thing on the Merk 4 too, you know; and considering how the rest of your treatment of this point is "I'd rather have a damaged engine", you're effectively trying to squirrel out of the fact that yes, the engine on the Merk is more vulnerable than it is on MBTs.
    Not if said conventional design had, y'know, armor there, like, I dunno, the Abrams or Leo 2.
    Again, do you have a single fact or source to back that opinion up?
    And, as usual, you are ignoring a much more vital component than the engine, care to guess what it is and why?
    In actual competently designed tanks post-1973 there are no fuel tanks in the crew compartment (excluding derivative designs which inherited them), so that's a bit of a moot point. Most modern tanks keep the fuel in the engine bay and/or the sponsons, and not in the front of the hull where armor belongs.
    I find that hard to believe, you wouldn't happen to have a source for that would you?
    Cause if we take that at face value, that would make the Merk the first tank designed without armor compromises since what, 1916?
    Also the multiple generations of modules and sideskirts spotted on Merks suggests that that is not actually the case.
    Of course another point that both you and Red missed is that tank armor is designed to meet a reference threat. What that threat is is a different question, but considering how Egypt, Jordan and Syria all operate tanks which fling APFSDS and which the Merk 4 is at least notionally supposed to be able to go up against and win, the idea that its armor doesn't at least do something against KE is laughable, to say the least. What the CE threat is is also an open question. Red also clearly doesn't get how "special" armors work against CE.
    Again, fact to back that up? Cause without a source, that's just meaningless handwaving.
    Cause even with the most modern turret modules seen on the Merk 4m, there doesn't seem to be any burster plate to prevent the blast from an ATGM disassembling the armor inside, the way we've all seen the pictures of it happening from 2006. If the declasified Brit Burlington docs are anything to go by, NERA arrays have trash multi-hit ability without burster plates, and there's no reason to believe the Izzys have some super duper sekrit sauce nobody else does to solve this problem.
    That's a very strong statement to throw around unsubstantiated. You wouldn't happen to have anything resembling a source to support this claim would you? Official claims that this is indeed the case? Product page on one of IMI's websites that claims this gun ever existed? pictures of a testbed with the gun?
    The last time I saw someone taking the claims of a 140mm gun on the Merk 4 seriously was back in the early 2000s, before the thing entered mass production, and even then it was presented as only being rumors and not thrown around as if it were a fact the way you're doing.
    Both these claims also need to be sourced.
    For reference, L/55 guns have a whole host of problems accompanying them, including balance issues, elevating mass and inertia, recoil impulse and length (same problem faced with more energetic ammo in L/44 guns), and so on. As part of the upgrade to the L/55 in the Leo (part of the A5 upgrade pack), the gun drives were replaced and the entire mantlet area redesigned -the newer mantlet is much narrower, and the gap is filled by armor boxes attached to the fixed turret structure, most likely to reduce the elevating mass and restore margins.
    L/55 guns are enough of a headache that the US seems to have decided to not go that route because of the problems the testbeds had with them. Handwaving away integration issues like this as "no biggie" is being deliberately ignorant.
    We've already been over the whole thermals business and that picture, but what I don't get is even if we assume you are correct and the Trophy antennae are a stronger radiator in the relevant wavelengths*, how is this greatly increased thermal signature a point in favor of the Merk?
    *even with extreme emissivity differences, I don't see how that could be the case. Comparing to a similar radar by the same manufacturer, I get 110W continuous power draw for the radars at most (comparing to the Elta EL/M-2129), as opposed to several hundred KW waste heat in the exhaust even at idle.
    A. You are aware that the wonders of modular armor mean that armor packages can be changed mid-batch, and that therefore doesn't make it a 4a/4b difference.
    B. If you think minor changes like that (and whatever internal changes to the armor module it covers) are enough to prevent the blast from a warhead shrekking the armor after a hit you're somewhere between deluded and hopeless.
     
    Before being a Democrat and blaming Russian propaganda, consider the following:
    1. Is it wrong? If it is correct, or at least has a good change of being so, crying "propaganda!" is a great way to discredit your viewpoint.
    2. Cui Bono? If the Russians don't stand to benefit (and indeed, what good does mocking the IR signature of an irrelevant third world country's tank does to the Russians), why would they waste their propaganda efforts on it?
    Kindly use your brain before posting.
    Also kindly try and keep your shitposting on this forum in full grammatically-correct sentences. 
  20. Tank You
    N-L-M got a reaction from LoooSeR in Israeli AFVs   
    While the video is indeed garbage, your rebuttal is as well.
    So your counterpoint to "the engine bay being hot and in the front is an issue with the Merk" is "It's more important and therefore it isn't an issue".
    If you actually bother to look at how the Merks 1-3 and the AVDS-1790 are put together, you would very quickly notice that the hottest air from the engine is blown straight onto the deck above (which on the Merk 1, 2, and early 3 would appear to only be solid steel, with no give-away bolt heads to indicate composite armor of any kind), and from there out the side louvers, sideways (and slightly back). if it were thrown down it would kick up clouds of dust.
    Steel is, of course, an extremely good conductor of heat, and this in turn means that if the lower surface gets hot, well, so too does the upper one. The thickness of this plate is, in fact, mostly irrelevant.
    Additionally, if you knew anything about other tanks which use the AVDS, you'd know that the entire purpose of the funky grating on the back of the M60 (and originally the M48A3 with the AVI-1790-8) is to reduce the IR signature. And yet despite that grating and exhaust tunnel design, the M60 retains a non-negligible IR signature. I strongly suggest reading what Hunnicutt has to say on the topic. To assume that the Merks 1-3, which squeeze more power out of what is effectively the same engine and therefore have more waste heat to remove, and have less grating area to permit airflow, somehow end up expelling colder air is plain fantasy.
    Unlike the Merk, the M60 spits out its hot exhaust rearwards, out of the line of sight, and therefore the exhaust grills are out of sight from the front. The Merk has its exhaust grills in the front arc of the tank, where they can clearly be seen (and of course the grills heat up to approximately the temperature of the exhaust air). On the Merk 1 it was waaaaay worse, as the engine combustion exhaust was just piped out to the sides and expelled there, resulting in a large patch of the vehicle which get hot enough to fry an egg on. On the later Merks the exhaust was routed to mix with the engine cooling air exhaust, indicating that this was a large enough problem that it needed to be solved.
    The later Merk 3 has a layered deck above the engine (if the bolt heads are anything to go by), and layers (particularly if they include air layers) are extremely good insulators, so that bit should be mostly ok now; the Merk 4 has both a layered deck and an MTU engine, in which the air flows the other way through the engine, from the top downwards and out the side. The Merk 4 also what looks like layered sponsons around the exhaust grate, which the 3 lacks; so that area too should be better off than it was. These tanks however also have solid steel hulls, which the engine can and does heat up through its mounting points (as you need pretty solid mounting points to hold down a 1000+HP diesel), and the hull extends forwards to the nose (and to the non-modular sponsons on the Merk 3), giving a large area in the front radiating away. It should also be noted that transmissions produce non-negligible quantities of waste heat, as do the brakes (torque converters too, yay viscous fluid shear), for obvious reasons; more so that the engine if you're doing anything other than standing still. And having those stacked right up close against the steel hull is asking for it to heat up.
     
    So yeah, handwaving away the heat from the automotive components being in front as "Not true"
    You wouldn't happen to have a single fact to back up that rather bold statement, would you? Like, a source of some kind?
    Regarding the pic you posted, there's a certain component that deserves some attention there. Specifically, the tires on the roadwheels. You may note, that they are white and therefore cold. Now, what do we know about roadwheels on tanks?
    hint: they ain't cold when the vehicle is moving:

    So by the fact that the wheels are cold, we know that the Merk you posted has not been moving, and indeed one cannot tell how long the engine has been running; nor can the LFP, which is by all accounts part of the steel hull, be seen. Using a photo such as that to demonstrate the effect of the engine on the thermal signature is disingenuous at best.
     
    The LFP is a thing on the Merk 4 too, you know; and considering how the rest of your treatment of this point is "I'd rather have a damaged engine", you're effectively trying to squirrel out of the fact that yes, the engine on the Merk is more vulnerable than it is on MBTs.
    Not if said conventional design had, y'know, armor there, like, I dunno, the Abrams or Leo 2.
    Again, do you have a single fact or source to back that opinion up?
    And, as usual, you are ignoring a much more vital component than the engine, care to guess what it is and why?
    In actual competently designed tanks post-1973 there are no fuel tanks in the crew compartment (excluding derivative designs which inherited them), so that's a bit of a moot point. Most modern tanks keep the fuel in the engine bay and/or the sponsons, and not in the front of the hull where armor belongs.
    I find that hard to believe, you wouldn't happen to have a source for that would you?
    Cause if we take that at face value, that would make the Merk the first tank designed without armor compromises since what, 1916?
    Also the multiple generations of modules and sideskirts spotted on Merks suggests that that is not actually the case.
    Of course another point that both you and Red missed is that tank armor is designed to meet a reference threat. What that threat is is a different question, but considering how Egypt, Jordan and Syria all operate tanks which fling APFSDS and which the Merk 4 is at least notionally supposed to be able to go up against and win, the idea that its armor doesn't at least do something against KE is laughable, to say the least. What the CE threat is is also an open question. Red also clearly doesn't get how "special" armors work against CE.
    Again, fact to back that up? Cause without a source, that's just meaningless handwaving.
    Cause even with the most modern turret modules seen on the Merk 4m, there doesn't seem to be any burster plate to prevent the blast from an ATGM disassembling the armor inside, the way we've all seen the pictures of it happening from 2006. If the declasified Brit Burlington docs are anything to go by, NERA arrays have trash multi-hit ability without burster plates, and there's no reason to believe the Izzys have some super duper sekrit sauce nobody else does to solve this problem.
    That's a very strong statement to throw around unsubstantiated. You wouldn't happen to have anything resembling a source to support this claim would you? Official claims that this is indeed the case? Product page on one of IMI's websites that claims this gun ever existed? pictures of a testbed with the gun?
    The last time I saw someone taking the claims of a 140mm gun on the Merk 4 seriously was back in the early 2000s, before the thing entered mass production, and even then it was presented as only being rumors and not thrown around as if it were a fact the way you're doing.
    Both these claims also need to be sourced.
    For reference, L/55 guns have a whole host of problems accompanying them, including balance issues, elevating mass and inertia, recoil impulse and length (same problem faced with more energetic ammo in L/44 guns), and so on. As part of the upgrade to the L/55 in the Leo (part of the A5 upgrade pack), the gun drives were replaced and the entire mantlet area redesigned -the newer mantlet is much narrower, and the gap is filled by armor boxes attached to the fixed turret structure, most likely to reduce the elevating mass and restore margins.
    L/55 guns are enough of a headache that the US seems to have decided to not go that route because of the problems the testbeds had with them. Handwaving away integration issues like this as "no biggie" is being deliberately ignorant.
    We've already been over the whole thermals business and that picture, but what I don't get is even if we assume you are correct and the Trophy antennae are a stronger radiator in the relevant wavelengths*, how is this greatly increased thermal signature a point in favor of the Merk?
    *even with extreme emissivity differences, I don't see how that could be the case. Comparing to a similar radar by the same manufacturer, I get 110W continuous power draw for the radars at most (comparing to the Elta EL/M-2129), as opposed to several hundred KW waste heat in the exhaust even at idle.
    A. You are aware that the wonders of modular armor mean that armor packages can be changed mid-batch, and that therefore doesn't make it a 4a/4b difference.
    B. If you think minor changes like that (and whatever internal changes to the armor module it covers) are enough to prevent the blast from a warhead shrekking the armor after a hit you're somewhere between deluded and hopeless.
     
    Before being a Democrat and blaming Russian propaganda, consider the following:
    1. Is it wrong? If it is correct, or at least has a good change of being so, crying "propaganda!" is a great way to discredit your viewpoint.
    2. Cui Bono? If the Russians don't stand to benefit (and indeed, what good does mocking the IR signature of an irrelevant third world country's tank does to the Russians), why would they waste their propaganda efforts on it?
    Kindly use your brain before posting.
    Also kindly try and keep your shitposting on this forum in full grammatically-correct sentences. 
  21. Tank You
    N-L-M got a reaction from Belesarius in Israeli AFVs   
    Consider the geometry of actual armor without ignoring the LFP.
    In addition, the mass of the ammo is almost insignificant (25 kg per round and 40 or so rounds in the hull is 1 ton, vs 2 tons each for the engine and transmission plus fluids).
    That's not how tracked vehicles work, at all.
    You keep throwing this around without sourcing it. While I get that the Merk 4 is better protected than the previous ones, I'm interested in hearing what the actual professionals have to say.
    Also, the Namer shows that when sufficiently motivated even the Izzys can adequately place armor around an AVDS if we ignore the LFP as usual.
    The Mark 2D seems to show that the guys in charge disagree about the driver's visibility and armor on that side. On the engine side, continuing the hull line at the hump forwards to the beak instead of having it drop would make room for an armor module in front of the engine. That area is not in the FOV of the driver's central periscope nor in the FOV of the right one, which looks out over the engine deck.
    Please don't throw around things like this, they betray just how little you actually know.
    Let's compare the AVDS-1790-5A as found in the Merk 1 to the MTU 883 in the Merk 4, shall we?
    First, the AVDS:

    And then the MTU:

    Notice something? The AVDS is nominally approximately 4" longer. But that includes the turbo arrangement, which isn't included in the MTU engine dimensions. Once you include the turbo, the MTU 883 is longer.
    But wait, you say, the powerpack isn't only the engine! The Merks have used CD-850 Allsions and RK-304 and RK-325 Renk transmissions!
    So let's take a look at those now.
    First, the CD-850:

    Note that the depth of the transmission, 29", is approximately 730mm.
    next, the RK-304:

    and finally, the RK-325:
    https://www.renk-ag.com/en/products-and-service/products/vehicle-transmissions/rk-325/
    Dimensions: 1,910 x 830 x 960mm
    that's L*W*H.
    So, in fact, the RK-325 as found on the Merk 4 is longer than the transmissions in any previous Merk model, as is the MTU engine.
    So yeah, the "significant reduction in length of the powerpack unit" is a simple sign that you don't actually know what you're talking about, care to guess again?
    You should know the drill by now. Source this claim.
    You're zigzagging from "theres no problem with armoring the front along with the engine, slight weight bias forwards is a good thing" to "need to restore balance by uneven wheel spacing".
    Also that's not the only reason for having wheels spaced unevenly, care to guess what the other ones are?
    Again you're not bringing your A-game, step it up.
    2 has a new powertrain with the Renk RK304 transmission, which necessitated changing the entire engine deck area, exhaust routed into the coolant air exhaust manifold, as well as turret changes like the mortar and special armor slapped on.
    The drivetrain of the 2 is closer to that of the 3 than it is to the 1.
    Well you'd also expect them to realize that ammo separation is the objectively correct way to go, but I suppose you can't get everything.
    Also how exactly would you expect them to realize that the alternative is better when they don't have any experience with rear engine tanks newer than the M60A3, anyway?
    Reminder that the Merk 3 has a roof sight.
    There's a difference between making something work and it being a good idea which gives you what you actually want.
    Red is not russian, even if you can't tell Eastern European accents apart.
    What did the big bad Russians do to you anyway?
    You're dragging the forum discourse level and SNR waaay the fuck down with your shitposting, cease.
     
    Hybrids bring their own host of problems, not least requiring more volume and weight than equivalent mechanical transmissions. Also, why would you go to all the trouble of putting the drive sprockets in the front, if you decouple them from the engine? it's objectively a worse location for them.
    This bit we've been over before, and I'm just qouting it again to rub your face in how wrong it is and how you never bothered to perform 10 minutes of googling because you lack any self-critical thinking ability.
    You're gonna have to source this too, this claim in particular is interesting, as on the Merk the air filters were never in the way of the UFP in the first place!
    Aaaand you're confirmed for never having viewed anything through a camera resting above a hot surface.
    That's not only an incredibly asinine statement, considering how the IDF hasn't designed any rear-engine MBTs, but it's nevertheless still wrong:



     
    In short, @Mighty_Zuk, you have a lot of unsubstantiated claims to back up, Referte Avt Morimini.
    You've also said a lot of bullshit that betrays a basic and fundamental lack of understanding of the subject matter. Git larned, and kindly match the confidence displayed in your posts to your actual level of knowledge in the subject matter, and not to what you'd like others to believe it is. You are invited to step up your game and keep the baseless speculation and denial to other forums like AW, and refrain from overly nationalistic fanboyism.
    Also, if you don't know something, even in a field which is close to your heart, just admit it. there's no shame in not knowing shit, but there's quite a lot in pretending to know stuff you don't and being flat out wrong.
    Kindly raise the standard of your posting, we really don't want this place devolving into AW or worse, DFI. Which is unfortunately the current posting standard you are representing.
     
    Sure, if you like your tanks immobile.
     
  22. Tank You
    N-L-M got a reaction from Toxn in Israeli AFVs   
    Consider the geometry of actual armor without ignoring the LFP.
    In addition, the mass of the ammo is almost insignificant (25 kg per round and 40 or so rounds in the hull is 1 ton, vs 2 tons each for the engine and transmission plus fluids).
    That's not how tracked vehicles work, at all.
    You keep throwing this around without sourcing it. While I get that the Merk 4 is better protected than the previous ones, I'm interested in hearing what the actual professionals have to say.
    Also, the Namer shows that when sufficiently motivated even the Izzys can adequately place armor around an AVDS if we ignore the LFP as usual.
    The Mark 2D seems to show that the guys in charge disagree about the driver's visibility and armor on that side. On the engine side, continuing the hull line at the hump forwards to the beak instead of having it drop would make room for an armor module in front of the engine. That area is not in the FOV of the driver's central periscope nor in the FOV of the right one, which looks out over the engine deck.
    Please don't throw around things like this, they betray just how little you actually know.
    Let's compare the AVDS-1790-5A as found in the Merk 1 to the MTU 883 in the Merk 4, shall we?
    First, the AVDS:

    And then the MTU:

    Notice something? The AVDS is nominally approximately 4" longer. But that includes the turbo arrangement, which isn't included in the MTU engine dimensions. Once you include the turbo, the MTU 883 is longer.
    But wait, you say, the powerpack isn't only the engine! The Merks have used CD-850 Allsions and RK-304 and RK-325 Renk transmissions!
    So let's take a look at those now.
    First, the CD-850:

    Note that the depth of the transmission, 29", is approximately 730mm.
    next, the RK-304:

    and finally, the RK-325:
    https://www.renk-ag.com/en/products-and-service/products/vehicle-transmissions/rk-325/
    Dimensions: 1,910 x 830 x 960mm
    that's L*W*H.
    So, in fact, the RK-325 as found on the Merk 4 is longer than the transmissions in any previous Merk model, as is the MTU engine.
    So yeah, the "significant reduction in length of the powerpack unit" is a simple sign that you don't actually know what you're talking about, care to guess again?
    You should know the drill by now. Source this claim.
    You're zigzagging from "theres no problem with armoring the front along with the engine, slight weight bias forwards is a good thing" to "need to restore balance by uneven wheel spacing".
    Also that's not the only reason for having wheels spaced unevenly, care to guess what the other ones are?
    Again you're not bringing your A-game, step it up.
    2 has a new powertrain with the Renk RK304 transmission, which necessitated changing the entire engine deck area, exhaust routed into the coolant air exhaust manifold, as well as turret changes like the mortar and special armor slapped on.
    The drivetrain of the 2 is closer to that of the 3 than it is to the 1.
    Well you'd also expect them to realize that ammo separation is the objectively correct way to go, but I suppose you can't get everything.
    Also how exactly would you expect them to realize that the alternative is better when they don't have any experience with rear engine tanks newer than the M60A3, anyway?
    Reminder that the Merk 3 has a roof sight.
    There's a difference between making something work and it being a good idea which gives you what you actually want.
    Red is not russian, even if you can't tell Eastern European accents apart.
    What did the big bad Russians do to you anyway?
    You're dragging the forum discourse level and SNR waaay the fuck down with your shitposting, cease.
     
    Hybrids bring their own host of problems, not least requiring more volume and weight than equivalent mechanical transmissions. Also, why would you go to all the trouble of putting the drive sprockets in the front, if you decouple them from the engine? it's objectively a worse location for them.
    This bit we've been over before, and I'm just qouting it again to rub your face in how wrong it is and how you never bothered to perform 10 minutes of googling because you lack any self-critical thinking ability.
    You're gonna have to source this too, this claim in particular is interesting, as on the Merk the air filters were never in the way of the UFP in the first place!
    Aaaand you're confirmed for never having viewed anything through a camera resting above a hot surface.
    That's not only an incredibly asinine statement, considering how the IDF hasn't designed any rear-engine MBTs, but it's nevertheless still wrong:



     
    In short, @Mighty_Zuk, you have a lot of unsubstantiated claims to back up, Referte Avt Morimini.
    You've also said a lot of bullshit that betrays a basic and fundamental lack of understanding of the subject matter. Git larned, and kindly match the confidence displayed in your posts to your actual level of knowledge in the subject matter, and not to what you'd like others to believe it is. You are invited to step up your game and keep the baseless speculation and denial to other forums like AW, and refrain from overly nationalistic fanboyism.
    Also, if you don't know something, even in a field which is close to your heart, just admit it. there's no shame in not knowing shit, but there's quite a lot in pretending to know stuff you don't and being flat out wrong.
    Kindly raise the standard of your posting, we really don't want this place devolving into AW or worse, DFI. Which is unfortunately the current posting standard you are representing.
     
    Sure, if you like your tanks immobile.
     
  23. Metal
    N-L-M got a reaction from Belesarius in Israeli AFVs   
    While the video is indeed garbage, your rebuttal is as well.
    So your counterpoint to "the engine bay being hot and in the front is an issue with the Merk" is "It's more important and therefore it isn't an issue".
    If you actually bother to look at how the Merks 1-3 and the AVDS-1790 are put together, you would very quickly notice that the hottest air from the engine is blown straight onto the deck above (which on the Merk 1, 2, and early 3 would appear to only be solid steel, with no give-away bolt heads to indicate composite armor of any kind), and from there out the side louvers, sideways (and slightly back). if it were thrown down it would kick up clouds of dust.
    Steel is, of course, an extremely good conductor of heat, and this in turn means that if the lower surface gets hot, well, so too does the upper one. The thickness of this plate is, in fact, mostly irrelevant.
    Additionally, if you knew anything about other tanks which use the AVDS, you'd know that the entire purpose of the funky grating on the back of the M60 (and originally the M48A3 with the AVI-1790-8) is to reduce the IR signature. And yet despite that grating and exhaust tunnel design, the M60 retains a non-negligible IR signature. I strongly suggest reading what Hunnicutt has to say on the topic. To assume that the Merks 1-3, which squeeze more power out of what is effectively the same engine and therefore have more waste heat to remove, and have less grating area to permit airflow, somehow end up expelling colder air is plain fantasy.
    Unlike the Merk, the M60 spits out its hot exhaust rearwards, out of the line of sight, and therefore the exhaust grills are out of sight from the front. The Merk has its exhaust grills in the front arc of the tank, where they can clearly be seen (and of course the grills heat up to approximately the temperature of the exhaust air). On the Merk 1 it was waaaaay worse, as the engine combustion exhaust was just piped out to the sides and expelled there, resulting in a large patch of the vehicle which get hot enough to fry an egg on. On the later Merks the exhaust was routed to mix with the engine cooling air exhaust, indicating that this was a large enough problem that it needed to be solved.
    The later Merk 3 has a layered deck above the engine (if the bolt heads are anything to go by), and layers (particularly if they include air layers) are extremely good insulators, so that bit should be mostly ok now; the Merk 4 has both a layered deck and an MTU engine, in which the air flows the other way through the engine, from the top downwards and out the side. The Merk 4 also what looks like layered sponsons around the exhaust grate, which the 3 lacks; so that area too should be better off than it was. These tanks however also have solid steel hulls, which the engine can and does heat up through its mounting points (as you need pretty solid mounting points to hold down a 1000+HP diesel), and the hull extends forwards to the nose (and to the non-modular sponsons on the Merk 3), giving a large area in the front radiating away. It should also be noted that transmissions produce non-negligible quantities of waste heat, as do the brakes (torque converters too, yay viscous fluid shear), for obvious reasons; more so that the engine if you're doing anything other than standing still. And having those stacked right up close against the steel hull is asking for it to heat up.
     
    So yeah, handwaving away the heat from the automotive components being in front as "Not true"
    You wouldn't happen to have a single fact to back up that rather bold statement, would you? Like, a source of some kind?
    Regarding the pic you posted, there's a certain component that deserves some attention there. Specifically, the tires on the roadwheels. You may note, that they are white and therefore cold. Now, what do we know about roadwheels on tanks?
    hint: they ain't cold when the vehicle is moving:

    So by the fact that the wheels are cold, we know that the Merk you posted has not been moving, and indeed one cannot tell how long the engine has been running; nor can the LFP, which is by all accounts part of the steel hull, be seen. Using a photo such as that to demonstrate the effect of the engine on the thermal signature is disingenuous at best.
     
    The LFP is a thing on the Merk 4 too, you know; and considering how the rest of your treatment of this point is "I'd rather have a damaged engine", you're effectively trying to squirrel out of the fact that yes, the engine on the Merk is more vulnerable than it is on MBTs.
    Not if said conventional design had, y'know, armor there, like, I dunno, the Abrams or Leo 2.
    Again, do you have a single fact or source to back that opinion up?
    And, as usual, you are ignoring a much more vital component than the engine, care to guess what it is and why?
    In actual competently designed tanks post-1973 there are no fuel tanks in the crew compartment (excluding derivative designs which inherited them), so that's a bit of a moot point. Most modern tanks keep the fuel in the engine bay and/or the sponsons, and not in the front of the hull where armor belongs.
    I find that hard to believe, you wouldn't happen to have a source for that would you?
    Cause if we take that at face value, that would make the Merk the first tank designed without armor compromises since what, 1916?
    Also the multiple generations of modules and sideskirts spotted on Merks suggests that that is not actually the case.
    Of course another point that both you and Red missed is that tank armor is designed to meet a reference threat. What that threat is is a different question, but considering how Egypt, Jordan and Syria all operate tanks which fling APFSDS and which the Merk 4 is at least notionally supposed to be able to go up against and win, the idea that its armor doesn't at least do something against KE is laughable, to say the least. What the CE threat is is also an open question. Red also clearly doesn't get how "special" armors work against CE.
    Again, fact to back that up? Cause without a source, that's just meaningless handwaving.
    Cause even with the most modern turret modules seen on the Merk 4m, there doesn't seem to be any burster plate to prevent the blast from an ATGM disassembling the armor inside, the way we've all seen the pictures of it happening from 2006. If the declasified Brit Burlington docs are anything to go by, NERA arrays have trash multi-hit ability without burster plates, and there's no reason to believe the Izzys have some super duper sekrit sauce nobody else does to solve this problem.
    That's a very strong statement to throw around unsubstantiated. You wouldn't happen to have anything resembling a source to support this claim would you? Official claims that this is indeed the case? Product page on one of IMI's websites that claims this gun ever existed? pictures of a testbed with the gun?
    The last time I saw someone taking the claims of a 140mm gun on the Merk 4 seriously was back in the early 2000s, before the thing entered mass production, and even then it was presented as only being rumors and not thrown around as if it were a fact the way you're doing.
    Both these claims also need to be sourced.
    For reference, L/55 guns have a whole host of problems accompanying them, including balance issues, elevating mass and inertia, recoil impulse and length (same problem faced with more energetic ammo in L/44 guns), and so on. As part of the upgrade to the L/55 in the Leo (part of the A5 upgrade pack), the gun drives were replaced and the entire mantlet area redesigned -the newer mantlet is much narrower, and the gap is filled by armor boxes attached to the fixed turret structure, most likely to reduce the elevating mass and restore margins.
    L/55 guns are enough of a headache that the US seems to have decided to not go that route because of the problems the testbeds had with them. Handwaving away integration issues like this as "no biggie" is being deliberately ignorant.
    We've already been over the whole thermals business and that picture, but what I don't get is even if we assume you are correct and the Trophy antennae are a stronger radiator in the relevant wavelengths*, how is this greatly increased thermal signature a point in favor of the Merk?
    *even with extreme emissivity differences, I don't see how that could be the case. Comparing to a similar radar by the same manufacturer, I get 110W continuous power draw for the radars at most (comparing to the Elta EL/M-2129), as opposed to several hundred KW waste heat in the exhaust even at idle.
    A. You are aware that the wonders of modular armor mean that armor packages can be changed mid-batch, and that therefore doesn't make it a 4a/4b difference.
    B. If you think minor changes like that (and whatever internal changes to the armor module it covers) are enough to prevent the blast from a warhead shrekking the armor after a hit you're somewhere between deluded and hopeless.
     
    Before being a Democrat and blaming Russian propaganda, consider the following:
    1. Is it wrong? If it is correct, or at least has a good change of being so, crying "propaganda!" is a great way to discredit your viewpoint.
    2. Cui Bono? If the Russians don't stand to benefit (and indeed, what good does mocking the IR signature of an irrelevant third world country's tank does to the Russians), why would they waste their propaganda efforts on it?
    Kindly use your brain before posting.
    Also kindly try and keep your shitposting on this forum in full grammatically-correct sentences. 
  24. Tank You
    N-L-M reacted to Lord_James in Competition: Californium 2250   
    That was my thought with my armor array: 
     
    For both: 
    front RHA disrupts projectile, followed by air to decompress and allow fragments to separate from main body, then HHA to shatter the projectile, with first group of NERA to catch whatever gets through HHA. 
     
    If it survives:
    CE; the middle textolite and RHA plate are to slow down the jet so the second group of NERA will perform better  (the geometry to make the NERA plates crosswise oriented is either a huge pain in my ass, or I have to remake my arrays for the 5th time...). 
     
    KE; the middle RHA and textolite are to further erode and disrupt the projectile, and the back JPA plate to catch whatever is left. 
     
    I’m also looking to use fuel tank geometry as armor (using tubes filled with fuel to do fun things, but I can’t find the study anymore ). 
     
    Anyway, I’ve updated my turret (it looks either like a chubby Merkava 1/2 turret, or a long T-90A turret), with 1100mm LoS from dead ahead, and at planning on Leopard 2 or Merkava 3 style wedge appliqué as upgrade. 
     
     
    Haven’t been working on it much though, as I am finishing my final for school, but hopefully I will have something to present before Friday. 
  25. Funny
    N-L-M reacted to Collimatrix in The fragile and transitory nature of humour   
    What the fuck is that nearest sign, land mines?
×
×
  • Create New...