Jump to content
Sturgeon's House

Recommended Posts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By LostCosmonaut
      Liquid fluorine has great potential as a rocket fuel; per the Encyclopedia Astronautica, LF2/LH2 has a specific impulse of 470 seconds. http://www.astronautix.com/l/lf2lh2.html Lithium/LF2/LH2 can get you over 500 seconds, but requires you to have molten lithium at over 450K stored near cryogenic liquid hydrogen.
       
      Krypton difluoride (KrF2) is a compound with some interesting properties, aside from being a noble gas compound. Annoyingly, it breaks apart at temperatures above about 195K. More importantly for the purpose of using it as a rocket propellant, it is an incredibly strong oxidizing agent. In fact, it is a more powerful oxidizer than fluorine gas, a consequence of the extremely dissociation energy (delta Hf) of the krypton-fluorine bond (54 kJ/mol, vs 157 kJ/mol for F2, via https://labs.chem.ucsb.edu/zakarian/armen/11---bonddissociationenergy.pdf )
       
      Hydrogen fluoride (HF), the product of burning hydrogen with fluoride compounds, has a bond dissociation energy of 568 kJ/mol. Modelling the combustion of KrF2 and H2, we get the following equation;
       
      KrF2 + H2 = Kr + 2HF
      -(2*55 + 436) = -2*569  + E
       
      for a net energy production of 592 kJ/mol. Compared to 545 kJ/mol for hydrogen/fluorine combustion, this is slightly better. Also, it has the advantage that your fuel is at a higher temperature (195K for KrF2 vs. 85K for LF2), and KrF2 is more dense than liquid fluorine. Unfortunately, KrF2 is a solid with no known liquid phase, and as mentioned, is unstable above 195K.
       
      A better option might be xenon fluorides. The xenon-fluorine bond has a bond energy of a mere 13 kJ/mol, and xenon compounds are much more understood than krypton compounds. Likely the best option is Xenon Hexafluoride (XeF6). Xenon hexafluoride melts at 322K, and boils at 348K. A fairly narrow temperature range, and unfortunately one that would require heating, but likely not insurmountable. (Sadly, I cannot find information on the liquid density of XeF6).
       
      XeF6 would react with H2 according to the following formula.
       
      XeF6 + 3H2 = Xe + 6HF
      -(6*13+3*436) = -6*569 + E
       
      for a net energy production of 2028 kJ/mol
       
      Granted, this combination would almost certainly have lower specific impulse than LH2/LF2 due to the large size of the xenon atom (average mass of exhaust products is 35.8 vs. 19, so exhaust velocity would be roughly 37% less). Assume roughly 300 isp assuming flame temp is equal to LH2/LF2, possibly more if the flame temp for xenon hexafluoride is higher. However, xenon hexafluoride fuel would give a higher thrust, in addition to being more dense and making your first stage smaller. Although at that point, why not use kerolox and ditch liquid hydrogen altogether. Still, an interesting theoretical exercise, and I'd be keen to see data on xenon hexafluoride flame temps if anyone has it.
       
    • By Oedipus Wreckx-n-Effect
      I found a bunch of my chemical engineering texts that I had PDFs for. I put them on my Google drive, so if anybody is interested, here's a few links.
       
       
      Let me know of if these links actually work. 
       
      I've been reading through my Reactor Chemistry text when I have downtime at work. Glad I finally am getting around to reading it. 
       

      Introduction to Engineering Ethics
       
       

      Elements of Chemical Reaction Engineering, fourth edition
       
       

      Fundamentals of Heat and Mass Transfer
       

      Numerical Methods for Engineers
       
       
       

      Thomas Calculus Early Transcendentals
       
       

      Quantum Chemistry
       
       
    • By Collimatrix
      Plutonium, in addition to being radioactive and fissile, has some rather exotic physical properties that make it... shall we say, exciting, to work with.
       
      One of these is that, like uranium, plutonium is pyrophoric.  That is, it burns spontaneously on contact with air.  The greater the surface area of the plutonium, the faster it burns.  This makes the management of the metal shaving from any machining operations critical.
       
      In addition, plutonium has six solid allotropes, and they vary wildly in density:
       

       
      Finally, and unusually, plutonium contracts when it freezes.
       
      It's rather odd stuff.
       
      Well, scientists just announced that they now understand a bit more about why it does this bizarre shit.
       
      Here's the paper, I don't claim to have understood anything past the abstract.
×