I want to calculate the weight required to make an armor that can resist 7.62 RUAG SWISS AP, also known as VPAM level 12. I needed a baseline so I took NIJ Level IV and then tried to find the difference of weight so I could get a percentage. The only plate that's still made for this threat is the TenCate CX-950 IC. This plate is 8.93 lbs for a sapi medium and is alumina in-conjonction with soft armor. I then needed to find a Level IV alumina IC, which I found on UARM's website. It's 7.6 lbs, so if we do 8.93/7.6 we get around 1.175, but I put 1.25 considering UARM's plates are often quite heavy. Now that we have 1.25, we can start applying it to silicon carbide and boron carbide. Denmark's group has a level IV silicon carbide plate at 5.95 lbs, so times 1.25 it gives 7.4375. Hesco's boron carbide IV plate is 5.1 lbs, so times 1.25 we get 6.375.
Now, I wanted to know what was the weight for hardened steel. I took MARS 600, which is one of the best armor steel you can get. Using this page, I can easily calculate that you would need about 19mm to stop it. Using a calculator, we know that a full inch sapi medium plate would weight 33.9 lbs. 19mm/25.4mm = 0.748 inch so if we do 0.748*33.9 we get 25.3572 lbs.
The problem is obvious : How is boron carbide 4 times as light as steel? Silicon carbide is 3.4 times as light too? It doesn't make any sense, giving that they are both around 2.2 ME and hardened steel is 1.3 ME, so it should be around 1.7 times heavier for steel. What did I get wrong?
Do you like pontificating on the infantryman's load? Want to see how different gear choices affect said load? If so, check out this spreadsheet including an itemized list of "best of breed" (IMHO) gear! Download it and customize to suit your own preferred equipment. The "Configured Totals" section should auto-calculate weights and ammunition totals for your selected items, and you can copy and paste "Configured Totals" values into the light and heavy load sections for comparison.
I've tried to provide a fairly comprehensive list of gear for the rifle squad and machine gun teams. A few items are notional, and those should be noted as such. I've also tried to balance both lightness and capability. I, however, mostly intend this spreadsheet to serve as an outline and handy way to calculate total values for any items you choose to add or change.
While I'm sure there are a more than a few errors, this spreadsheet is merely intended as a starting point for your own explorations, and I am NOT likely to maintain this particular version. Enjoy!
Infantry Packlist Spreadsheet
Hey y'all, long time no see. I Thought I understood the premise of perforated armor, but earlier today I realized I probably don't. I thought perforated armor was just supposed to damage/decelerate a projectile as it passed through, but then I realized that I thought that's what spaced armor is for, so what's the difference. I also realized I may not really know what perforated armor is at all. I realized that I simultaneously associate two fairly different images with perforated armor.
I imagine this as just breaking small projectiles as they hit it. But then there's this
which appears to have slots all throughout it, which is more of what I think of when I think of something being perforated, but this doesn't look like it really serves the same purpose, nor do I have any idea what purpose this does serve now that I think about it. So what am I missing about perforated armor(and whatever one of these things is if not perforated armor)?