Jump to content
Sturgeon's House

Recommended Posts

On 7/24/2019 at 2:34 PM, skylancer-3441 said:

Article from International Defense Review 1981-12 "T-34 to T-80 "The Evolution of Soviet Battle Tanks PLUS the IDR's T-62 test report"

EAPUTT1WkAI-IKY?format=jpg&name=4096x409

  Reveal hidden contents

EAPUYfDWkAI_t4l?format=jpg&name=4096x409 EAPUgu5XUAE3nh2?format=jpg&name=4096x409

 

EAPUjDeWkAIvHZb?format=jpg&name=4096x409 EAPawPdXoAA2V-d?format=jpg&name=4096x409

 

EAPayV2XoAERqk1?format=jpg&name=4096x409

OCR text w/ larger pics (and same pics of better quality from other sources) moved next to their captions:

 

Thank you for posting this article. I remember reading it when it first came out. At the time, for those of us in the West without access to classified information, it was a seminal article. Looking at the date of publication, it is also a reminder that I am now an old git! 

Share this post


Link to post
Share on other sites
7 hours ago, Karamazov said:

For more accurate aiming. It is load with tracer bullets.

M50 Ontos have rifles for same purposes. And AKSU probably because the ballistics is the same:wacko: 

 

That was half a century a go and I can't imagine that a 5,45 bullet fired at 735 m/s could have similar trajectory as RPG round at 130 m/s. 

Share this post


Link to post
Share on other sites
3 hours ago, Beer said:

 

That was half a century a go and I can't imagine that a 5,45 bullet fired at 735 m/s could have similar trajectory as RPG round at 130 m/s. 

  ...and small laser rangefinders for short distances are not too costly to buy and easier to use, not limited to amount of tracers in 1 mag and have higher reliability.

 

Unrelated - Syria, 2016.

QgTjllR.jpg.

 

Share this post


Link to post
Share on other sites
5 hours ago, Beer said:

That was half a century a go and I can't imagine that a 5,45 bullet fired at 735 m/s could have similar trajectory as RPG round at 130 m/s. 

Much in the Russian army is archaic. Including among new developments. Comrade Looser correctly said that it would be cheaper to use a rangefinder.

But at one time, Russian tank crewmans removed the DVE-BS wind sensors from the tanks. Because they did not know how to use them.

Maybe with the rangefinders in the 21st century the same situation?

Share this post


Link to post
Share on other sites

Just watched tank biathlon first round... (yep, I had nothing better to do, still more entertaining than formula-1 for example)

3 T-80UE-1 competed, all with female crews. And despite they never were tankists, they did very well. So well, that they would probably beat about 3/4 of the teams from other countries. They were more gentle to the tanks, so hopefully they wont go to the scrapyard. 

Some observations: T-80UD style AAMG mount is very accurate. The commanders hit their target with their first 1-2 rounds.

Main gun shot results were similar as T-72s, all 3 crews hit 2/3 targets. Coax MG bursts were surprisingly accurate however, much more than with T-72. Hits achieved almost immediately, with 2-3 rounds. And finally, T-80s are very fast, max speed was 74km/h, with great acceleration.

Share this post


Link to post
Share on other sites
1 hour ago, heretic88 said:

Just watched tank biathlon first round... (yep, I had nothing better to do, still more entertaining than formula-1 for example)

3 T-80UE-1 competed, all with female crews. And despite they never were tankists, they did very well. So well, that they would probably beat about 3/4 of the teams from other countries. They were more gentle to the tanks, so hopefully they wont go to the scrapyard. 

Some observations: T-80UD style AAMG mount is very accurate. The commanders hit their target with their first 1-2 rounds.

Main gun shot results were similar as T-72s, all 3 crews hit 2/3 targets. Coax MG bursts were surprisingly accurate however, much more than with T-72. Hits achieved almost immediately, with 2-3 rounds. And finally, T-80s are very fast, max speed was 74km/h, with great acceleration.

Link please!

Share this post


Link to post
Share on other sites
1 hour ago, Cheburashka said:

Link please!

This also includes the second round, featuring Belarus (2nd place), China (winner), Azerbaijan (3rd place) and Serbia (4th place)

 

Share this post


Link to post
Share on other sites

Today new speed record for "T-72B3 Circus edition" - 78km/h.

 

How did they do it? Even more tuned engine? Custom sport transmission? Tank gutted inside to reduce weight? Or combination of all 3? 

Serial T-72B3, with 1130hp engine (the one Belarus uses) cant reach more than 72 kmh.

Quite funny, but as far as I know,  the rules for the circus say that no prototypes, only serial tanks. T-72B3 Circus edition is anything but serial... Hard to take this competition seriously. :D 

 

Share this post


Link to post
Share on other sites
Quote

   SU-85 from the 75th separate self-propelled artillery battalion of the 104th Guards Airborne Division, stationed in the Transcaucasian Military District in the city of Ganja; ~ early 80s

8TNuG7O.jpg

 

Spoiler

iKStHCC.jpg

 

oiISy06.jpg

 

yQ81HVy.jpg

 

Share this post


Link to post
Share on other sites
15 hours ago, Lord_James said:

Aren’t those ASU-85’s?

 

6 hours ago, LoooSeR said:

lol, didn't noticed that A got away. :D

 

Actually it's really SU-85, by the docs on it.The hell...

So it seems that neither is wrong, be it ASU-85 or SU-85

Share this post


Link to post
Share on other sites
37 minutes ago, Pascal said:

 

 

Actually it's really SU-85, by the docs on it.The hell...

So it seems that neither is wrong, be it ASU-85 or SU-85

   Heh, never really payed attention to those old VDV (airdroppable) vehicles.

http://btvt.info/1inservice/su-85.htm

   Looks like yes, it is SU-85, to my own surprise.

Share this post


Link to post
Share on other sites

My book has been submitted! Now to sit back and become a New York Times bestselling author.

 

Preorder it if you haven't already, and if you have then preorder a second one.

https://www.amazon.com/Designing-T-34-2019-Genesis-Revolutionary/dp/1911658301

 

UeYst2w.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By N-L-M
      ATTENTION DUELISTS:
      @Toxn
      @LostCosmonaut
      @Lord_James
      @DIADES
      @Datengineerwill
      @Whatismoo
      @Kal
      @Zadlo
      @Xoon
      detailed below is the expected format of the final submission.
      The date is set as Wednesday the 19th of June at 23:59 GMT.
      Again, incomplete designs may be submitted as they are and will be judged as seen fit.
       
      FINAL SUBMISSION:
      Vehicle Designation and name

      [insert 3-projection (front, top, side) and isometric render of vehicle here)



      Table of basic statistics:

      Parameter

      Value

      Mass, combat


       
      Length, combat (transport)


       
      Width, combat (transport)


       
      Height, combat (transport)


       
      Ground Pressure, MMP (nominal)


       
      Estimated Speed


       
      Estimated range


       
      Crew, number (roles)


       
      Main armament, caliber (ammo count ready/stowed)


       
      Secondary armament, caliber (ammo count ready/stowed)


       

       
      Vehicle designer’s notes: explain the thought process behind the design of the vehicle, ideas, and the development process from the designer’s point of view.

      Vehicle feature list:
      Mobility:

      1.     Link to Appendix 1- RFP spreadsheet, colored to reflect achieved performance.

      2.     Engine- type, displacement, rated power, cooling, neat features.

      3.     Transmission- type, arrangement, neat features.

      4.     Fuel- Type, volume available, stowage location, estimated range, neat features.

      5.     Other neat features in the engine bay.

      6.     Suspension- Type, Travel, ground clearance, neat features.

      Survivability:

      1.     Link to Appendix 1 - RFP spreadsheet, colored to reflect achieved performance.

      2.     Link to Appendix 2- armor array details.

      3.     Non-specified survivability features and other neat tricks- low profile, gun depression, instant smoke, cunning internal arrangement, and the like.

      Firepower:

      A.    Weapons:

      1.     Link to Appendix 1- RFP spreadsheet, colored to reflect achieved performance.

      2.     Main Weapon-

      a.      Type

      b.      Caliber

      c.      ammunition types and performance (short)

      d.     Ammo stowage arrangement- numbers ready and total, features.

      e.      FCS- relevant systems, relevant sights for operating the weapon and so on.

      f.      Neat features.

      3.     Secondary weapon- Similar format to primary. Tertiary and further weapons- likewise.

      4.     Link to Appendix 3- Weapon system magic. This is where you explain how all the special tricks related to the armament that aren’t obviously available using Soviet 1961 tech work, and expand to your heart’s content on extimated performance and how these estimates were reached.

      B.    Optics:

      1.     Primary gunsight- type, associated trickery.

      2.     Likewise for any and all other optics systems installed, in no particular order.

      C.    FCS:

      1.     List of component systems, their purpose and the basic system architecture.

      2.     Link to Appendix 3- weapon system magic, if you have long explanations about the workings of the system.

      Fightability:

      1.     List vehicle features which improve its fightability and useability.

      Additonal Features:

      Feel free to list more features as you see fit, in more categories.

      Free expression zone: Let out your inner Thetan to fully impress the world with the fruit of your labor. Kindly spoiler this section if it’s very long.


       Example for filling in Appendix 1
    • By N-L-M
      Restricted: for Operating Thetan Eyes Only

      By order of Her Gracious and Serene Majesty Queen Diane Feinstein the VIII

      The Dianetic People’s Republic of California

      Anno Domini 2250

      SUBJ: RFP for new battle tank

      1.      Background.
      As part of the War of 2248 against the Perfidious Cascadians, great deficiencies were discovered in the Heavy tank DF-1. As detailed in report [REDACTED], the DF-1 was quite simply no match for the advanced weaponry developed in secret by the Cascadian entity. Likewise, the DF-1 has fared poorly in the fighting against the heretical Mormonhideen, who have developed many improvised weapons capable of defeating the armor on this vehicle, as detailed in report [REDACTED]. The Extended War on the Eastern Front has stalled for want of sufficient survivable firepower to push back the Mormon menace beyond the Colorado River south of the Vegas Crater.
      The design team responsible for the abject failure that was the DF-1 have been liquidated, which however has not solved the deficiencies of the existing vehicle in service. Therefore, a new vehicle is required, to meet the requirements of the People’s Auditory Forces to keep the dream of our lord and prophet alive.


       
      Over the past decade, the following threats have presented themselves:

      A.      The Cascadian M-2239 “Norman” MBT and M-8 light tank

      Despite being approximately the same size, these 2 vehicles seem to share no common components, not even the primary armament! Curiously, it appears that the lone 120mm SPG specimen recovered shares design features with the M-8, despite being made out of steel and not aluminum like the light tank. (based on captured specimens from the battle of Crater Lake, detailed in report [REDACTED]).
      Both tanks are armed with high velocity guns.

      B.      The Cascadian BGM-1A/1B/1C/1D ATGM

      Fitted on a limited number of tank destroyers, several attack helicopters, and (to an extent) man-portable, this missile system is the primary Cascadian anti-armor weapon other than their armored forces. Intelligence suggests that a SACLOS version (BGM-1C) is in LRIP, with rumors of a beam-riding version (BGM-1D) being developed.

      Both warheads penetrate approximately 6 cone diameters.

      C.      Deseret tandem ATR-4 series
      Inspired by the Soviet 60/105mm tandem warhead system from the late 80s, the Mormon nation has manufactured a family of 2”/4” tandem HEAT warheads, launched from expendable short-range tube launchers, dedicated AT RRs, and even used as the payload of the JS-1 MCLOS vehicle/man-portable ATGM.
      Both warheads penetrate approximately 5 cone diameters.

      D.      Cascadian HEDP 90mm rocket
      While not a particularly impressive AT weapon, being of only middling diameter and a single shaped charge, the sheer proliferation of this device has rendered it a major threat to tanks, as well as lighter vehicles. This weapon is available in large numbers in Cascadian infantry squads as “pocket artillery”, and there are reports of captured stocks being used by the Mormonhideen.
      Warhead penetrates approximately 4 cone diameters.

      E.      Deseret 40mm AC/ Cascadian 35mm AC
      These autocannon share broadly similar AP performance, and are considered a likely threat for the foreseeable future, on Deseret armored cars, Cascadian tank destroyers, and likely also future IFVs.

      F.      IEDs

      In light of the known resistance of tanks to standard 10kg anti-tank mines, both the Perfidious Cascadians and the Mormonhideen have taken to burying larger anti-tank A2AD weaponry. The Cascadians have doubled up some mines, and the Mormons have regularly buried AT mines 3, 4, and even 5 deep.

      2.      General guidelines:

      A.      Solicitation outline:
      In light of the differing requirements for the 2 theaters of war in which the new vehicle is expected to operate, proposals in the form of a field-replaceable A-kit/B-kit solution will be accepted.

      B.      Requirements definitions:
      The requirements in each field are given in 3 levels- Threshold, Objective, and Ideal.
      Threshold is the minimum requirement to be met; failure to reach this standard may greatly disadvantage any proposal.

      Objective is the threshold to be aspired to; it reflects the desires of the People’s Auditory Forces Armored Branch, which would prefer to see all of them met. At least 70% must be met, with bonus points for any more beyond that.

      Ideal specifications are the maximum of which the armored forces dare not even dream. Bonus points will be given to any design meeting or exceeding these specifications.

      C.      All proposals must accommodate the average 1.7m high Californian recruit.

      D.      The order of priorities for the DPRC is as follows:

      a.      Vehicle recoverability.

      b.      Continued fightability.

      c.       Crew survival.

      E.      Permissible weights:

      a.      No individual field-level removable or installable component may exceed 5 tons.

      b.      Despite the best efforts of the Agriculture Command, Californian recruits cannot be expected to lift weights in excess of 25 kg at any time.

      c.       Total vehicle weight must remain within MLC 120 all-up for transport.

      F.      Overall dimensions:

      a.      Length- essentially unrestricted.

      b.      Width- 4m transport width.

                                                                    i.     No more than 4 components requiring a crane may be removed to meet this requirement.

                                                                   ii.     Any removed components must be stowable on top of the vehicle.

      c.       Height- The vehicle must not exceed 3.5m in height overall.

      G.     Technology available:

      a.      Armor:
      The following armor materials are in full production and available for use. Use of a non-standard armor material requires permission from a SEA ORG judge.
      Structural materials:

                                                                    i.     RHA/CHA

      Basic steel armor, 250 BHN. The reference for all weapon penetration figures, good impact properties, fully weldable. Available in thicknesses up to 150mm (RHA) or 300mm (CHA).
      Density- 7.8 g/cm^3.

                                                                   ii.     Aluminum 5083

      More expensive to work with than RHA per weight, middling impact properties, low thermal limits. Excellent stiffness.

       Fully weldable. Available in thicknesses up to 100mm.
      Mass efficiency vs RHA of 1 vs CE, 0.9 vs KE.
      Thickness efficiency vs RHA of 0.33 vs CE, 0.3 vs KE.
      Density- 2.7 g/cm^3 (approx. 1/3 of steel).

      For structural integrity, the following guidelines are recommended:

      For light vehicles (less than 40 tons), not less than 25mm RHA/45mm Aluminum base structure

      For heavy vehicles (70 tons and above), not less than 45mm RHA/80mm Aluminum base structure.
      Intermediate values for intermediate vehicles may be chosen as seen fit.
      Non-structural passive materials:

                                                                  iii.     HHA

      Steel, approximately 500 BHN through-hardened. Approximately twice as effective as RHA against KE and HEAT on a per-weight basis. Not weldable, middling shock properties. Available in thicknesses up to 25mm.
      Density- 7.8g/cm^3.

                                                                  iv.     Glass textolite

      Mass efficiency vs RHA of 2.2 vs CE, 1.64 vs KE.

      Thickness efficiency vs RHA of 0.52 vs CE, 0.39 vs KE.
      Density- 1.85 g/cm^3 (approximately ¼ of steel).
      Non-structural.

                                                                   v.     Fused silica

      Mass efficiency vs RHA of 3.5 vs CE, 1 vs KE.

      Thickness efficiency vs RHA of 1 vs CE, 0.28 vs KE.
      Density-2.2g/cm^3 (approximately 1/3.5 of steel).
      Non-structural, requires confinement (being in a metal box) to work.

                                                                  vi.     Fuel

      Mass efficiency vs RHA of 1.3 vs CE, 1 vs KE.

      Thickness efficiency vs RHA of 0.14 vs CE, 0.1 vs KE.

      Density-0.82g/cm^3.

                                                                vii.     Assorted stowage/systems

      Mass efficiency vs RHA- 1 vs CE, 0.8 vs KE.

                                                               viii.     Spaced armor

      Requires a face of at least 25mm LOS vs CE, and at least 50mm LOS vs KE.

      Reduces penetration by a factor of 1.1 vs CE or 1.05 vs KE for every 10 cm air gap.
      Spaced armor rules only apply after any standoff surplus to the requirements of a reactive cassette.

      Reactive armor materials:

                                                                  ix.     ERA-light

      A sandwich of 3mm/3mm/3mm steel-explodium-steel.
      Requires mounting brackets of approximately 10-30% cassette weight.

      Must be spaced at least 3 sandwich thicknesses away from any other armor elements to allow full functionality. 81% coverage (edge effects).

                                                                   x.     ERA-heavy

      A sandwich of 15mm steel/3mm explodium/9mm steel.
      Requires mounting brackets of approximately 10-30% cassette weight.
      Must be spaced at least 3 sandwich thicknesses away from any other armor elements to allow full functionality. 81% coverage (edge effects).

                                                                  xi.     NERA-light

      A sandwich of 6mm steel/6mm rubber/ 6mm steel.
      Requires mounting brackets of approximately 10-30% cassette weight.
      Must be spaced at least 1 sandwich thickness away from any other armor elements to allow full functionality. 95% coverage.

                                                                 xii.     NERA-heavy

      A sandwich of 30mm steel/6m rubber/18mm steel.
      Requires mounting brackets of approximately 10-30% cassette weight.
      Must be spaced at least 1 sandwich thickness away from any other armor elements to allow full functionality. 95% coverage.

      The details of how to calculate armor effectiveness will be detailed in Appendix 1.

      b.      Firepower

                                                                    i.     2A46 equivalent tech- pressure limits, semi-combustible cases, recoil mechanisms and so on are at an equivalent level to that of the USSR in the year 1960.

                                                                   ii.     Limited APFSDS (L:D 15:1)- Spindle sabots or bourelleted sabots, see for example the Soviet BM-20 100mm APFSDS.

                                                                  iii.     Limited tungsten (no more than 100g per shot)

                                                                  iv.     Californian shaped charge technology- 5 CD penetration for high-pressure resistant HEAT, 6 CD for low pressure/ precision formed HEAT.

                                                                   v.     The general issue GPMG for the People’s Auditory Forces is the PKM. The standard HMG is the DShK.

      c.       Mobility

                                                                    i.     Engines tech level:

      1.      MB 838 (830 HP)

      2.      AVDS-1790-5A (908 HP)

      3.      Kharkov 5TD (600 HP)

                                                                   ii.     Power density should be based on the above engines. Dimensions are available online, pay attention to cooling of 1 and 3 (water cooled).

                                                                  iii.     Power output broadly scales with volume, as does weight. Trying to extract more power from the same size may come at the cost of reliability (and in the case of the 5TD, it isn’t all that reliable in the first place).

                                                                  iv.     There is nothing inherently wrong with opposed piston or 2-stroke engines if done right.

      d.      Electronics

                                                                    i.     LRFs- unavailable

                                                                   ii.     Thermals-unavailable

                                                                  iii.     I^2- limited

      3.      Operational Requirements.

      The requirements are detailed in the appended spreadsheet.

      4.      Submission protocols.

      Submission protocols and methods will be established in a follow-on post, nearer to the relevant time.
       
      Appendix 1- armor calculation
      Appendix 2- operational requirements
       
      Good luck, and may Hubbard guide your way to enlightenment!
    • By Collimatrix
      Shortly after Jeeps_Guns_Tanks started his substantial foray into documenting the development and variants of the M4, I joked on teamspeak with Wargaming's The_Warhawk that the next thing he ought to do was a similar post on the T-72.
       
      Haha.  I joke.  I am funny man.
       
      The production history of the T-72 is enormously complicated.  Tens of thousands were produced; it is probably the fourth most produced tank ever after the T-54/55, T-34 and M4 sherman.
       
      For being such an ubiquitous vehicle, it's frustrating to find information in English-language sources on the T-72.  Part of this is residual bad information from the Cold War era when all NATO had to go on were blurry photos from May Day parades:
       

       
      As with Soviet aircraft, NATO could only assign designations to obviously externally different versions of the vehicle.  However, they were not necessarily aware of internal changes, nor were they aware which changes were post-production modifications and which ones were new factory variants of the vehicle.  The NATO designations do not, therefore, necessarily line up with the Soviet designations.  Between different models of T-72 there are large differences in armor protection and fire control systems.  This is why anyone arguing T-72 vs. X has completely missed the point; you need to specify which variant of T-72.  There are large differences between them!
       
      Another issue, and one which remains contentious to this day, is the relation between the T-64, T-72 and T-80 in the Soviet Army lineup.  This article helps explain the political wrangling which led to the logistically bizarre situation of three very similar tanks being in frontline service simultaneously, but the article is extremely biased as it comes from a high-ranking member of the Ural plant that designed and built the T-72.  Soviet tank experts still disagree on this; read this if you have some popcorn handy.  Talking points from the Kharkov side seem to be that T-64 was a more refined, advanced design and that T-72 was cheap filler, while Ural fans tend to hold that T-64 was an unreliable mechanical prima donna and T-72 a mechanically sound, mass-producible design.
       
      So, if anyone would like to help make sense of this vehicle, feel free to post away.  I am particularly interested in:
       
      -What armor arrays the different T-72 variants use.  Diagrams, dates of introduction, and whether the array is factory-produced or a field upgrade of existing armor are pertinent questions.
       
      -Details of the fire control system.  One of the Kharkov talking points is that for most of the time in service, T-64 had a more advanced fire control system than contemporary T-72 variants.  Is this true?  What were the various fire control systems in the T-64 and T-72, and what were there dates of introduction?  I am particularly curious when Soviet tanks got gun-follows-sight FCS.
       
      -Export variants and variants produced outside the Soviet Union.  How do they stack up?  Exactly what variant(s) of T-72 were the Iraqis using in 1991?

      -WTF is up with the T-72's transmission?  How does it steer and why is its reverse speed so pathetically low?
       
       
    • By LoooSeR
      Hello, my friends and Kharkovites, take a sit and be ready for your brains to start to work - we are going to tell you a terrible secret of how to tell apart Soviet tanks that actually works like GLORIOUS T-80 and The Mighty T-72 from Kharkovites attempt to make a tank - the T-64. Many of capitalists Westerners have hard time understanding what tank is in front of them, even when they know smart words like "Kontakt-5" ERA. Ignoramus westerners!
       
       
         Because you are all were raised in several hundreds years old capitalism system all of you are blind consumer dummies, that need big noisy labels and shiny colorful things to be attached to product X to be sold to your ignorant heads and wallets, thats why we will need to start with basics. BASICS, DA? First - how to identify to which tank "family" particular MBT belongs to - to T-64 tree, or T-72 line, or Superior T-80 development project, vehicles that don't have big APPLE logo on them for you to understand what is in front of you. And how you can do it in your home without access to your local commie tank nerd? 
       
       
         Easy! Use this Putin approved guide "How to tell appart different families of Soviet and Russian tanks from each other using simple and easy to spot external features in 4 steps: a guide for ignorant western journalists and chairborn generals to not suck in their in-depth discussions on the Internet".
       
       
       
      Chapter 1: Where to look, what to see.
       
      T-64 - The Ugly Kharkovite tank that doesn't work 
       
         We will begin with T-64, a Kharkovite attempt to make a tank, which was so successful that Ural started to work on their replacement for T-64 known as T-72. Forget about different models of T-64, let's see what is similar between all of them.
       
       
       

       
       
         
       
       
      T-72 - the Mighty weapon of Workers and Peasants to smash westerners
       
         Unlike tank look-alike, made by Kharkovites mad mans, T-72 is true combat tank to fight with forces of evil like radical moderate barbarians and westerners. Thats why we need to learn how identify it from T-64 and you should remember it's frightening lines!
       

       
       
       
      The GLORIOUS T-80 - a Weapon to Destroy and Conquer bourgeois countries and shatter westerners army
       
         And now we are looking at the Pride of Party and Soviet army, a true tank to spearhead attacks on decadent westerners, a tank that will destroy countries by sucking their military budgets and dispersing their armies in vortex of air, left from high-speed charge by the GLORIOUS T-80!

      The T-80 shooting down jets by hitting them behind the horizont 
          
×
×
  • Create New...