Search the Community
Showing results for tags 'power'.
Metal cooled reactors have several advantages over pressurized water reactors. For one, their power density is greater, additionally, the coolant is unpressurized, improving safety. However, there are some downsides. The Soviets' Project 705 class submarines were powered by liquid metal reactors utilizing a lead-bismuth alloy as coolant. This alloy had a freezing temperature of roughly 400K. As a result, the reactors had to be run constantly, even while the submarines were in port (there were facilities to provide superheated steam to the reactors while the subs were docked, but they broke down and were never repaired). This reduces the lifetime of the reactor. Another coolant choice which has been used operationally is NaK (Sodium-Potassium). This alloy is liquid at room temperature, but reacts violently with water or air. I'm not an expert, but this seems like a bad thing. It seems to me that if appropriate coolants could be found, it seems that liquid metal fast reactors could see more widespread acceptance. To my untrained eye, gallium looks like a good choice. Its melting point is relatively close to room temperature (~303K), and the boiling point is quite high (over 2600K). Also, gallium is less reactive than sodium or other alkali metals. It appears that there has been some research on this topic: http://www.sciencedirect.com/science/article/pii/S0149197000000640(unfortunately, the article is behind a paywall), and it looks quite promising. Anybody have any opinions on this, or suggestions for alternative coolants?