Jump to content
Sturgeon's House

Recommended Posts

  • Replies 338
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

3ds Max isn't very nice for telling you how much something will weigh and all that jazz, so I'm probably just going submit eye candy with backstory tacked on.  That was pretty much my original goal an

FINAL VERSION CARACAL MMEV A MEDIUM TANK FOR THE MODERN AGE THE HONDENAAIER INDUSTRIES, LTD. CARACAL MEDIUM MULTIPURPOSE EXPEDITIONARY VEHICLE Hondenaaier Ind., Ltd. is proud to present its new

Thanks for the welcome.     The name "Stormpanser" means something close to "Assault armor" when translated from Norwegian into English.   And:   Germanic languages: German: Panzer Swedish: P

FINAL VERSION

CARACAL MMEV

A MEDIUM TANK FOR THE MODERN AGE

gMoIzKQ.jpg

THE HONDENAAIER INDUSTRIES, LTD. CARACAL MEDIUM MULTIPURPOSE EXPEDITIONARY VEHICLE

Hondenaaier Ind., Ltd. is proud to present its new design for a revolutionary medium weight vehicle. The CARACAL tank meets every need for a rapid deployment expeditionary vehicle for infantry support, long range fire, anti-tank missions, counter-insurgency warfare, and conventional engagements. The CARACAL tank sports a combination of all-around armor, devastating firepower, and great speed that makes it one of the most well-balanced and relentlessly effective vehicles ever designed.

CARACAL MEDIUM MULTIPURPOSE EXPEDITIONARY VEHICLE

SPECIFICATIONS

CRvCMSN.png

Crew: 3 (Driver, Gunner, Commander

Engine: MTU 871 Ka-501 1200 shp, 2,600 RPM

Cylinder displacement: 3.97 l

Total displacement: 31.7 l

Transmission: Allison X1100-3B, option for HMPT-1000 CVT

Suspension: Torsion bar, fully compatible with M2/M3 Bradley

Width: 3.350m, 3.920m w/ Second Chance-Light ERA

Hull height: 1.240m

Hull width: 2.160m

Hull length: 7.140m

Turret ring: 2.150m (same as M1)

Ground clearance: 0.46m

Empty weight: 35 tonnes

Combat weight: 36-40 tonnes, depending on configuration

Maximum speed: 80 km/h (governed)

Maximum reverse speed: 48 km/h (with X1100)

Fuel capacity: 230 US gallons (870 l)

Hull rotation time (360°): 8 seconds

Turret rotation time (360°): 7 seconds

Armament: 75mm Lancer CT Autocannon, 2-3 machine guns

Ammunition load: 150 75mm CT rounds, ~9,000 MMG rounds, ~800 HMG rounds

Stabilization: 2-axis, passively stabilized

Main gun elevation/depression: 25/-12 degrees

Ammunition types (75mm): HEAT-MP-T (programmable), HEDP-T (programmable), APFSDS-T, HEAT-T, TP-T, TPCSDS-T, HE-OR-T

FIREPOWER

s5ZhduK.jpg

The CARACAL has the most versatile armament of any modern fighting vehicle. Standard armament consists of a smoothbore 75mm automatic cannon, capable of variable rates of fire between 50 and 200 rounds per minute, in three shot bursts. This cannon fires caseless single-piece ammunition from a magazine contained in the turret bustle. The cannon is of the swing-chamber type, with a separate chamber segment that swings to the left of the gun axis under the force of recoil. At the end of its stroke, it triggers an electrically-driven feed mechanism capable of loading the gun at over 400 rounds per minute, limited to 200 in practice. This feed mechanism is capable of feeding the gun at all attitudes and arcs of rotation.

The 75mm cannon is fully programmable, and is integrated with the tank's stabilization and situational awareness systems. This gives the tank great capability against softer targets like infantry, helicopters, and light armored vehicles. For example, one mode coordinates a three-round burst of 75mm programmable high explosive projectiles, according to the target being engaged. When attacking infantry, the CARACAL's gun fires three projectiles at a calculated dispersion given the range detected by the tank's sensors, ensuring that each projectile bursts above the ground near the target at the very edge of every other round's radius. These rounds can be patterned in line, rank, cloverleaf, and other patterns, for destructive capability far, far beyond that of even higher-caliber artillery guns. Against lightly armored vehicles and IFVs, the CARACAL's 75mm gun can be programmed to either maximize hit probability or penetration. In the former mode, the gun works by attacking a smaller dispersion area against the identified target, ensuring the highest probability of a knock out hit. In the latter mode, three 75mm rounds are programmed to strike the exact same location, allowing the first two hits to detonate or disrupt any explosive reactive or non explosive reactive armor on the vehicle. Likewise, when attacking helicopters, this same capability allows the CARACAL to fire a maximum-hit-probability group at its target, enabling the CARACAL to quickly kill helicopters before they can engage it back. This enables the CARACAL MMEV to dominate its battlespace versus air and ground threats alike.

The CARACAL is not your average expeditionary light tank, however. With a 2,150mm turret ring, the CARACAL is capable of accepting all M1-compatible turrets and guns, including 140mm tank gun systems designed by Royal Ordnance, GIAT, and Rheinmetall. This ensures that the CARACAL chassis remains competitive in the event of a high intensity conflict with a high density of enemy main battle tanks. Against lighter, less capable offerings from other companies, the CARACAL is in a class by itself.

With the combination of an incredibly effective and versatile 75mm gun, and main battle tank caliber armament that can defeat even the most advanced threats, the HONDENAAIER INDUSTRIES, LTD. CARACAL MEDIUM MULTIPURPOSE EXPEDITIONARY VEHICLE is the right solution for the unpredictable future nonlinear battlespace of tomorrow!

ARMOR

bFPm9Rx.jpg

The CARACAL MMEV provides the most cost-effective and flexible armor solution of any main battle fighting vehicle available today. At its foundation, the CARACAL MMEV comes proofed against 30mm HEDP ammunition from attack angles as generous as 60 degrees from the horizon. This basic layer of armor not only protects the CARACAL from small arms fire, heavy machine gun fire, and most autocannon fire, but shields the CARACAL against attack helicopter cannon fire as well. Even in the lightest package, the CARACAL protects against high explosive shells as large as 105mm from a distance of 5m, as well as rocket and light antitank weapon fire at severe angles. The comprehensive protection package doesn't end there, however, as the CARACAL also comes with a modular armor attachment system built-in to the base armor layer, allowing it to mount extensive Explosive Reactive Armor and Non-Explosive Reactive Armor packages over its glacis, mantlet, turret, and side skirts. The Second Chance-Light ERA package, for example protects against an additional 600mm of RHA penetration, giving the fully-equipped CARACAL MMEV a total of almost 800mm RHA protection from the frontal aspect.

Against mines and IEDs, the CARACAL MMEV is protected by a generous 40mm thick armor plate as the base layer, but also has mounting points for additional belly armor packages including NERA and laminate armor. At its maximum threat armor package, the CARACAL protects against TM-72 and Type 84 anti-tank mines, as well as large IED warheads.

Beyond its passive armor package, the CARACAL also offers upgrade capability with a wide variety of Active Protection Systems, including the comprehensive Regal APS, which couples a computer-controlled multi-function Doppler radar to Low Reaction Time (LRT) projectile dispensers that can intercept a variety of incoming missiles from 600-3,000 m/s velocity. Regal also incorporates a multi-function signal jammer to confuse and deflect incoming missiles away from the CARACAL MMEV.

Further, the CARACAL MMEV so-equipped with both ERA and APS systems still stays within the weight and size limits necessary for two to be comfortably transported in a C-17 Globemaster III transport aircraft, with roll-on/roll-off capability. This allows the CARACAL MMEV to deploy to anywhere in the world within hours, to everywhere from major airports to unprepared grasslands, while doubling the strategic capability of an armored force versus current heavier main battle tank offerings.

So protected, the CARACAL is a tough adversary, capable of going toe-to-toe and emerging victorious against the latest man-portable anti-tank weapons, helicopter-fired ATGMs, and main battle tank cannons. Far from being “just another light tank”, the CARACAL MMEV is a true “high transportable” medium main battle fighting vehicle.

MOBILITY

ICPHaKs.jpg

At its maximum weight configuration, the CARACAL MMEV is packing 32 hp/tonne, giving it a full third more power to weight than competing heavier main battle tanks. This additional power, coupled with advanced transmission and suspension options, gives the CARACAL unprecedented battlefield mobility that allows it to attack the enemy any time, anywhere, and melt away before the enemy can coordinate a counter-attack. The CARACAL embodies the modern incarnation of the firefighting tank, able to sprint from hotspot to hotspot to attack and defeat the enemy so that friendly forces can take objectives and defeat the enemy in detail. As a dynamic fire support weapon, the CARACAL is unparalleled; its speed, coupled with its devastating firepower allow it to rapidly support allied forces and defeat enemy air and ground threats alike, making it a key component in future battle plans that demand rapid, total victory.

OPTICS AND COMMUNICATION

oHNqH8j.jpg

The CARACAL MMEV is equipped with the latest optical sensors, thermal all-weather vision equipment, internal radar and early warning systems, laser rangefinders and designators, and electronic network integration systems. This comprehensive optics and communication suite makes the CARACAL the most situationally aware vehicle on the battlefield, as well as the vehicle with the lowest reaction time to any threat. Mounted on the right of the turret is the commander's cupola, fully equipped with all around multi-function day/night/all-weather periscopes mounted around the hatch. On the left of the turret is the gunner's periscope, also an all-weather multi-function model with full thermal and low light capabilities. Both the commander and gunner are fully equipped to fight in any weather under the protection of the CARACAL's armor, minimizing the amount of time that either crewmember must remain unbuttoned. Due to this, the CARACAL can fight at any time, in any environment, including in nuclear threat zones.

The CARACAL's databus is fully compatible with MIL-STD-1553, and also supports IEEE 1394, giving the CARACAL the most flexible electronics suite of any modern armored fighting vehicle, and that means the CARACAL is an eminently upgradeable vehicle that can adapt to changing requirements and new technology. Likewise, the CARACAL is a fully networked vehicle, able to communicate in an instant with allied air, sea, and land forces through its fully FIPS-140-compliant network suite. All of the network and electronics modules on the CARACAL are also completely modular, easing the demands of full fleet refurbishment and giving the CARACAL the lowest projected upgrade costs of any current armored vehicle.

THE CARACAL MMEV is the world's future premier lightweight main battle fighting vehicle, able to deploy rapidly to anywhere in the world at a moment's notice twice as efficiently as the modern main battle tank. Capable of defeating all threats, air or ground, while completing mission objectives and providing maximum survivability and battlefield persistence for allied forces, the CARACAL is THE next-generation fighting vehicle for tomorrow's non-euclidean battlezone. Choose to win. Choose the CARACAL MEDIUM MULTIPURPOSE EXPEDITIONARY VEHICLE.

HONDENAAIER INDUSTRIES, LTD., WE GO IN DEEP FOR DEFENSE

OOC Supplementary Stuff:

OK, so this is a section for out of character supplementary info regarding my design, some of which was requested by Colli. First, here's the Caracal with the maximum ERA package:

WFEYFdG.png

It's not a proper render because the render function on my SolidWorks appears to have broken for the moment. Oh well, anyway, it illustrates the package. More to come.

Alright, I've calculated the total weight of that heavy ERA package, and it comes to 4.2 tonnes. That's based on the weight of Kontakt-5, and the volume of ERA on the Caracal.

Here's the total weight breakdown for the Caracal:

Caracal weight breakdown:

Hull weight, bare: 11.63 tonnes

Driver's hatch weight: 0.196 tonnes

Turret weight, bare: 6.08

Mantlet weight, bare: 0.869 tonnes

Optics weight: 0.357 tonnes

Commander's hatch weight: 0.063 tonnes

Gunner's hatch weight: 0.035 tonnes

Periscope weights:

0.014 tonnes

0.014 tonnes

Total armor percentage: 56% (without ERA)

ERA weight: 1.9 tonnes (light), 4.2 tonnes (heavy)

Fender/side skirts weight: 0.49 tonnes

Gun weight: 1.144 tonnes (3.3%)

Ammunition weight: 0.810 tonnes

Fuel weight (230 US gallons): 0.696 tonnes

Powerpack weight: 4,300 kilograms (12.4%)

Track and suspension weight: 0.196 tonnes per roadwheel assembly

(including torsion bars; 14 total, equals 2.744 tonnes), plus

3.560 tonnes for all track links, plus 0.185 tonnes for two idler wheel assemblies, plus 0.485 tonnes for two sprockets. (22.2% for all track and suspension elements combined)

Total estimated weight (current): 34.4 tonnes (clean), 36.3 tonnes (light ERA), 38.6 tonnes (heavy ERA)

Track contact area is as follows:

R6bCKS2.png

That equals 4.87 square meters area. Here are the contact dimensions, if you want:

GszGdcy.png

The dimensions of the ammunition, by the way, are 130mmx530mm. The ammunition is perfectly cylindrical.

Link to post
Share on other sites

Especially in South Africa, where they used dogs for other purposes than just guard duties.

 

Good name.

We didn't eat them, certainly. Anyway, I have it on good authority that sheep... uh... nevermind.

 

The 'e' should really be removed, in any case.

Link to post
Share on other sites

3ds Max isn't very nice for telling you how much something will weigh and all that jazz, so I'm probably just going submit eye candy with backstory tacked on.  That was pretty much my original goal anyway, but with less effort in mind on the eye candy part.

 

Some parts still need to be worked on, but I'm fiddling with an extra armor variant as as well.  Edit shows current head-on coverage

 

I also added fenders/stowage space, rearranged wheel positions AGAIN, added a cap for filling up for fuel and other engine goodies, rear doors (subject to change), and a bunch of little tweaks here and there.

 

Vwc5E9P.png

 

tVQARcj.png

 

vKYio9s.png

Edited by ApplesauceBandit
Link to post
Share on other sites

   Applesauce Bandit, you can do simple quick math of weight of the hull. Steel density, thickness and dimensions of the hull will be enough for rough estimation.   

I suppose I could, but I've not exactly built this using real world measurements either.  If I have the motivation and time, I'll do it.

 

Trying to figure out the specifics on the internal layout and going from there.  I know close to nothing about the automotive side of tanks, so I'll not bother picking a layout for there.

 

 

Blocked out space inside to figure out ammo stowage and make sure there was room for things.  Holds 99 rounds of ammo, with 75 rounds in a fancy carousel and 24 ready rounds.  I guess it'll do a 3 round burst since I went for multiples of 3 and the ammo in the carousel is grouped in lines of 3.   There's plenty of empty room behind the turret I'll need to decide what to do with.

 

PJmikUA.png

Link to post
Share on other sites

I better shuffalo the buffalo

 

If I don't make a new post, I'll edit this one into the real deal.  This will be more a place for me to horde the pieces of the final submission.  Where my submission lacks in technical details, it makes up for it in eye candy.

 

This design actually ended up being a lot smaller than originally planned, now that I'm measuring it compared to the people inside.  In fact, I'd call it tiny.  I might be able to fit the sucker in a plane, but I've have to check the weight and numbers.

 

I'm getting this down here because I'm really tired and you can't stop me

 

~~~~~~werdz~~~~~~~~~

 

THIS IS NOT THE FINAL THING.

 

 

 

Just like my bae HSTV-L, the thing I made is 95" in height

Absolute height (tracks to panoramic sight) is 109"

 

Length (end of tracks on either side) is 244"

Length (end of rear tow to front applique) 254"

 

Width (hull edge to edge) is 81"

Width (armor skirts) is 129"

Width (outer track edges) is 121.5"

Width (track center-center) is 104"

 

Track contact length is 164"

Track width is 17.5"

Total contact area is 5740"sq
Track ratio wizardry is 1.57

st8XSxw.png

 

Has 99 CANNON BULLETS

75 rounds in automated carousel system, 24 ready rounds

Has MG ammo somewhere in there, I know it's got to be able to squeeze in somehow

 

Gun is 60mm, 3 round burst

Gun is feed by 2 separate belts

 

Ability to equip APS, ERA, and other fancy things

 

Can keep track of several designated targets at once and fire at them to ease workload on commander

 

I accidentally made this too small, but I'm wanting at least STANAG IV protection from sides and rear, STANAG VI at the front.  Dunno if I'll still get that now.

 

Other stuff tomorrow

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Toxn
      This is the competition entry thread.
       
      Please submit your complete entries here (all entries will be judged complete when judging begins in the first week of November) and keep the other competition thread for discussion and chatter.
       
      Once judging is complete I will make a post here to discuss the entries and announce a winner.
       
      Best of luck!
       
      Update: final submissions should be in hand by the 22nd of November 2020.
    • By Toxn
      You are an engineer at an Italian locomotive and tractor-making company in early 1943. The writing is on the wall for the Italian army in North Africa, with a lot of equipment having been lost and the enemy on the brink of kicking the axis out of Tunisia and then heading across the Mediterranean. In short, things are looking more than a little desperate. 
       
      However, all is not lost. Il Duce himself has stepped in and, with the assistance of the Germans, procured both some of their finest captured vehicles for use in the upcoming defense of the homeland. Since many of these vehicles have been... gently used, and the existing firms like Ansaldo are flooded with orders, your firm has been asked to work on them in order to bring them up to the standards demanded by modern warfare. 
       
      In addition to these vehicles, the Germans have also graciously agreed to sell weapons from their existing stock of captured equipment, as well as providing production licenses for some of their more modern equipment. You have also been given permission to work with local weapons manufacturers in order to modify existing artillery to suit your needs. Italian automotive and engine manufacturers are similarly available to help. Finally; your firm's experience in locomotives and tractors means that you can modify hulls and put together turrets and turret rings. You can also produce castings (although not very large ones) and weld armour plates.
       
      Your job, which you have no choice but to accept, is to choose a vehicle from among the captured stock being offered for sale, and propose a series of plausible fixes in order to give it a fighting chance against the American and British equipment currently in the field (specifically light tanks and light anti-tank weapons).
       
      It is not foreseen that any of these vehicles will be able to plausibly take on modern medium or heavy designs head-on. Instead, what is wanted are general, implementable improvements to the characteristics of the chosen vehicle. These improvements should be aimed at making these vehicles more useful in the initial battles which are foreseen taking place against airborne and landing forces, in general cooperation with infantry, and as scouts.
       
      The submission should include one or more drawings or blueprints (at least a side view of the vehicle, but preferably a 3-point view and isometric view), a description of the modified vehicle, a description of how the modifications would be accomplished and a description of how the modifications would improve the design overall. The text of the submission should short and descriptive rather than long and exhaustive, and should not exceed 1000 words in total. Images may be photoshopped using existing pictures.
       
      Judging will be done on the basis of plausibility and effectiveness, with innovative solutions being encouraged in order to get the most bang for buck out of the base vehicle. Beyond implementation, the fixes should prioritise combat effectiveness while also improving reliability, crew ergonomics, communication, mobility and protection as much as possible.
       
      The foreign vehicles available for modification are:
      Renault R35 (already in service) Hotchkiss H35/39 Somua S35 (already in use for training purposes) T-26 BT-5 T-28 (only available in very small numbers, so need to be extremely effective) Panzer II Ausf.C  
      The foreign weapons immediately available for purchase are:
      15mm ZB-60 25mm Puteaux and Hotchkiss 3.7cm KPÚV vz. 34/Pak 34 (t) 3.7cm ÚV vz. 38/KwK 38(t)
      3.7cm Pak 36 4.0 cm Pak 192 (e) 45mm M1937 (53-K) 4.7cm KPÚV vz. 38/Pak 38 (t) 47mm APX 7.5cm Pak 97/38 7.62 cm F.K.297(r) and  7.62 cm PaK 39(r) 8.8cm Raketenwerfer 43  
      Licenses are also available for the manufacture of foreign engines (Maybach HL62 TRM, Maybach HL120 TRM and Praga Typ TNHPS/II), periscopes, sights, radios, cupolas and automotive subassemblies. All foreign vehicle weapons, subassemblies and components are available for reverse engineering and manufacture.
       
      IMPORTANT NOTE: This competition hasn't been finalised, and is waiting on your input! Vote to participate by giving this topic a 'controversial' (grapefruit-induced tears being the only currency of value), and if we get enough participants we'll pull the trigger. Ask any questions you want below, and when/if the competition goes forwards I will make a new thread for entries.
       
      Edit: thanks to excellent feedback, the competition proposal has been somewhat edited. If you want an idea of what my mindset is here, read up on the battle of Gela (bearing in mind that the wikipedia entry is shite) and ask how much better the counter-attack could have gone if the Italian vehicles had been equipped with radios and had the ability to move faster than jogging speed.
       
      Edit 2: since I failed to mention this above - this is not a one-man, one-entry sort of competition (although I'm not keen on the ten-men, one entry approach either).
      If you have two good ideas then you can submit twice. The only rules are not to test my patience and to keep it within the bounds of good taste.
    • By Toxn
      So I got a request recently from {NAME REDACTED} as to whether we have a how-to guide or something for competitions. After a few moments of bitter, bitter laughter at the decade-plus of my life that I've spent cobbling together things that can maybe, sort-of, squint-your-eyes produce a facsimile of a realistic vehicle, I thought I'd share my process:
       
       
      Note: I was half-right - we definitely have supplementary info for aspiring pretend tank designers pinned to this very board.
       
      Finally, I'm inviting our forum grognards and past winners to share their process for folk that haven't been here since before the last ice age, so that all can benefit.
    • By Sturgeon
      We're holding a smaller, lower-effort competition while things simmer down enough for me to reboot the Texas competition to allow more people to participate. Those of you that choose to participate, enjoy.

      This competition is intended to be a brief 1-2 week long effort which should require only a handful of man-hours to complete, depending on skill level. Unlike a proper competition, this has one person who's judge, jury, and executioner (me!), to allow the maximum number of competitors. Consider this a brief interlude before the reboot of the Texas competition (which is likely to pick up more or less where it left off). Accordingly, there will be relatively little fluff and editorializing. Contestants will be given a basic setting and a set of requirements with a description of the unique mission needing to be solved. Beyond that, contestants will be responsible for filling in the gaps on their own, to whatever degree they see fit.
       
      Programs required: Solid modeling software, ammunition load development software, ballistic calculator, performance estimators (provided)
       
      Expected man-hours: 5-10
       
      Deliverables required: Image of loaded cartridge and projectile, cutaway or exploded view of projectile or projectile + cartridge, cartridge data sheet, bill of materials (including all component masses and materials), ballistic charts (not required to be in graph form), completed performance estimate sheets, any supplementary materials the contestant chooses to provide.

      The competition will be largely conducted via the SH discord, if you're interested please PM me for a link if you don't already have one.

      BEGIN FLUFF

      After the War, the Great Plains became virtually cut off from the rest of the former United States. Governments fractured into small polities based around towns and cities, as local populations realized they no longer were enfranchised as part of a larger economy and logistical network. State governments began to be seen overwhelmingly as distant meddlers who offered nothing in return for their interference in local politics. The area around the Black Hills was no exception. The states of South Dakota and Wyoming disintegrated quickly once the Federal Government of the United States no longer took a direct role in state affairs. A loose government formed around Rapid City, supported by strong manufacturing jobs, traders, and a large ammunition plant that could support paramilitary operations ranging around the Black Hills region and securing the roads that remained passable. Due to this, their influence expanded well into Eastern Wyoming and north to Southeast Montana and North Dakota. The emerging Dakota Union became the primary, if thinly spread, force in the northern plains region. Their most famous agents would be the Sioux Scouts.



      Unlike most pre-war infantry forces, which operated as part of large combined arms units in a highly tiered structure, the Scouts are highly independent light infantry. Often, Sioux Scouts will travel hundreds of miles unsupported in units as small as pairs, or even the occasional single Scout. While on patrol, they are responsible for their own sustenance and upkeep, foraging for food and shooting with their rifles what they need to survive. For the moment, there are no other organized military forces in the region, and Scouts are tasked primarily with maintaining contact, trade, and awareness of the peoples living inside the Northern Great Plains, and the hills to the West. As part of their duties, they are sometimes called to settle disputes, mete out justice, or are even permanently stationed in affiliated regions to maintain law and order. In times of war, they function in larger units as an army to protect Black Hills from incursion, but this hasn't happened in many decades. There is no distinction between "officers" and "enlisted" in the Sioux Scouts, but there is a basic hierarchy, and Scout pairs will often have a subordinate and a superior. In times of greater trouble, Scouts are also expected to marshal and lead local forces in the local defense. Generally, Sioux Scouts travel on foot or on horseback. They are substantially made up of Indian peoples, although any residents of the Dakota Union may join the all-volunteer force.
       

       
      Currently, the Sioux Scouts are armed with a motley assortment of both manually-operated and semiautomatic rifles in various calibers. The Sioux Scouts have requested a new semiautomatic rifle to replace these, and it has been determined that they require a new caliber to go along with it, hopefully phasing out the assorted legacy calibers in the process. Thanks to the plant in Rapid City, this is a very feasible request for the Dakota Union (and helps sustain jobs in its largest city). You are an engineer at the Rapid City plant, tasked with creating a report on what the new caliber's characteristics should be. Resources, testing facilities, and reams of research are made available to you. The year is 2221. Get to work.

      END FLUFF
       
      The new round must:
      1. Produce no less than 700 ft-lbs at 600 yards.
      2. Penetrate twenty-four 1/2" pine boards at 600 yards (equivalent to a lethal penetrating shot on a quartered buffalo).
      3. Drop no more than 96 inches at 600 yards (2.6in sight height, 100yd zero, 59.0F temperature, 29.92in Hg pressure).
      4. Drift no more than 36 inches at 600 yards (2.6in sight height, 100yd zero, 59.0F temperature, 29.92in Hg pressure, 10mph 90 degree crosswind).
      5. All performance requirements must be met at 200 ft/s below the spec velocity, except the 600 yard energy requirement, which can be met at 500 yards at -200 ft/s, instead.
      6. Produce pressure no greater than 52,000 CUP (brass cased) or 50,000 CUP (steel cased).
      7. Use a projectile composed only of any combination of the following: Copper alloy, bronze alloy, lead alloy, iron alloy, steel alloy, tin alloy, nickel alloy, and/or zinc alloys. Titanium, tungsten, aluminum, magnesium, and other exotic metals are not allowed.
      8. Minimum magazine capacity must be 20, with a stack height no greater than 5 inches.
      9. Cartridge overall length may not exceed 2.8 inches.
      10. Cartridge recoil from a 10lb weapon may not exceed 12 ft-lbs.
      11. Cartridge must meet performance requirements from a 22" barreled weapon.
      12. Cartridge must cost as little as possible.

      You are provided with calculators to use to estimate these values for the competition. For trajectory, drift, and energy, you must use JBM Ballistics calculator here. Internal ballistics must be estimated via the Powley Computer (just check the pressure box and enter 52,000 CUP for brass or 50,000 CUP for steel). Also please see my guidelines for modeling steel cases here. The pine penetration value must be calculated with this spreadsheet, and the recoil energy with this spreadsheet. For the purposes of this competition, cost per round is determined solely by the materials used. Please reference the material cost sheet here. If you do not already have a solid modeling program, you can use Google SketchUp for free. @Toxn has a lot of experience with it, you might ask him.

×
×
  • Create New...