(M4A3E8, ultimate production Sherman)
This is a work in progress, please feel free to comment, or help me with info and links.
Click here to see the new The Sherman Tank Website!
All content is still discussed and previewed in this thread. If you have feedback or want to help with the content, this thread is the best place to do it.
The Epic M4 Sherman Tank Information Post.
SHERMAN: M4: M4A1: M4A2: M4A3: M4A4: M4A6: M50: M51
The Sherman tank over the last several decades has had its reputation severely soiled by several documentaries, TV shows, and books, all hailing it as a death trap, engineering disaster, or just a bad tank. The Sherman tank may be the most important, and arguably the best tank of the war. The only other contender for the best tank award would be the Soviet T-34. These two tanks are very comparable and would fight each other in later wars, staying very comparable through their service lives.
This post will cover why the Sherman was a better tank than anything Germany, Italy or Japan produced during the war, on both a tactical and strategic level. I will not be reproducing the work of others, and will link to the places that already cover some information. I will cover all the major changes made to the each Sherman model.
I will try and cover the many post war variants as well, but that could take months, there are a lot of variants of this venerable tank, including ones that involve putting the engine from one hull type into another hull type and or tanks modified by other countries with no feedback from the American designers. I’ll try and get civilian use in here as well. Some variants have heavily modified turrets, or replaced it with a new one.
Basic Sherman History: The Big Stuff
To really know why the Sherman was designed the way it was, you have to know about the M3 Lee. The M3 was the predecessor of the M4. It was based on M2 medium, the US Army’s only foray into modern medium tank design, and was the fastest way a tank could be designed with a 75 mm M3 canon fitted. The US lacked the jigs to make a turret ring big enough to house a gun that large in a turret; the Lee went into production while the turret ring problem was being solved, by mounting the gun in a sponson mount. It had become clear to the US Army that the 75mm canon would be needed based on feedback from the British, and observations of how the war was developing in Europe.
One of the reasons for the reliability of the M4 design was the use of parts that started their design evolution in the M2 medium and were improved through the M3 production run. Over the life of M3 Lee and M4 Sherman the designs were continually improved as well, so a final production, M3, or M4A1, bared little resemblance to an initial production M3 or M4A1, yet many parts would still interchange. This is one of the reasons the Israelis had so much success updating the Sherman to the M50 and M51, these tanks used early small hatch hulls, that never had HVSS suspension installed, but the hulls took the updated suspension with few problems.
When the Lee went into production, though it was far from an ideal design, it still outclassed the German and Italian armor it would face, and its dual purpose 75mm gun would allow it to engage AT guns with much more success than most British tanks it replaced. It was reliable, and well-liked by its users. When the British got enough Shermans, the Lees and Grants were sent to the Far East and saw use until the end of the war fighting the Japanese. The Lee excelled at infantry support, since it had a 37mm canon that could fire canister rounds, along with the 75mm gun and a lot of machine guns. Many of these Lee tanks ended up in Australia after the war.
Lee variants: The Combat RV
(early M3 Lee)
This was the first version of the tank and used a riveted hull with the R975 radial engine powering it, the suspension and tracks were very similar to the M2 medium. Early production tanks had an M2 75mm instead of the improved M3 gun. These tanks had a counter weight mounted on the shorter barrel. All Lees had a turret with 37mm M5 gun. The early production version had two hull mounted, fixed .30 caliber machine guns, another mounted coaxially with the 37mm gun, and another in a small turret, mounted on top of the 37mm turret for the commander.
They built nearly 5000 of these tanks. The M3 was improved on the production line with things like removal off hull machine guns, and hull side doors. The mini turret mounted M1919A4 was not a popular feature, and was hard to use, but it remained on all Lees, and were only deleted from the Grant version produced exclusively for the British.
If this version had a major flaw, it would be the riveted armor plates could shed rivets on the inside of the tank and these rivets bounced around like a bullet. This was bad for the crew, but, rarely resulted in a knocked out tank. A field fix for this was welding the rivets in place on the interior of the tank. Most of the M3 Lees produced went to the British.
(cast hull M3A1)
This version of the Lee had a cast hull, and R975 radial power. It was really the same as the base Lee in most respects including improvements. 300 built. These cast hull tanks have a very odd and distinctive look. They look almost like a M3 Lee was melted. This hull casting was huge and more complicated than the M4A1 casting. Most of these tanks were used in the United States for training.
This Lee had a welded hull and the R975 powering it. 12 built. This version was more of a ‘proof of concept’ on welding a hull than anything.
Another welded hull but this one powered by the GM 6046 Twin Diesel. 322 built, like the base Lee, with the same improvements. This is the first vehicle the 6046 was used in, and most of the bugs were worked out on this model.
This version had a riveted hull and was powered by the A-57 multibank motor. This motor was so large the hull had to be stretched for it to fit; it also required a bulge in the top and bottom of the hull to fit the cooling fan. They also had to beef up the suspension, and the suspension units designed for this would become standard units on the Sherman. This would be the only version of the Lee with the improved bolt on offset return roller VVSS, otherwise this tank was very much like the base M3. 109 built. This motor’s bugs were worked out on this tank and would go on to power a large chunk of Sherman production.
Another welded hull, powered by the GM 6046 Twin diesel with a new bigger turret to house British radios. 591 built. This new turret deleted the small machine gun turret on the roof of the 37mm turret. This version was used only by the British. The famous General Montgomery’s personal M3A5 is on display in England, at the Imperial War Museum in London.
. . .
The majority of Lee and all Grants saw service with the British, and many Lees went to the Soviet Union. They were generally well liked by both nations and more reliable than most of its British and German contemporaries. These tanks were better than the enemy tanks they faced until the Germans up gunned the Panzer IV series. When they were replaced with M4s of various types the M3 were shipped to the Far East for use in Burma and New Guinea. The Japanese had no tank that could take on a Lee, let alone a Sherman. Using soldiers as suicide bombers, and mines still worked though, there was also a pesky 47mm AT gun, but it was rare.
They saw limited use in the US Army’s hands some seeing combat in North Africa, because US combat units lost their Shermans to replace British losses, and a few were used in the PTO. The Sherman owes it success to the lessons learned producing the Lee and from its use in combat. The 75mm gun and automotive systems, even the more complicated ones, would be perfected in the Lee and re-used in M4, and the Sherman only had one motor not tested in the Lee first. Many of the Lee variants were produced at the same time and the numbering system was more to distinguish between hull and engine types, not to model progression like in aircraft, and other tanks. This practice was carried over to the M4 series as were all the engines used in the Lee.
Many people familiar with the way the United States designated aircraft during the war figure it was carried over to tanks and think an M3A1 was an improved M3, and an M3A2 was an improved A1. This is not the case, as many of these versions were produced at the same time, and they all received the same sets of improvements, though some factories took longer to implement things than others.
The M4 went into production as soon as the jigs for the turret ring were produced and ready to be used. Production actually started on the cast hull M4A1 first, with the welded M4 following right behind it. Like the Lee, there were many version of the Sherman in production at the same time. There are many photos of Lee’s coming off the production line, with Shermans in the line right behind the last Lee, so there was no real gap in production between the two tanks at most of the factories.
The Sherman variants: The Design Matures
First off, Americans referred to the Sherman as the M4, or M4 Medium, or Medium, the Sherman name was not commonly used until post WWII. The British came up with the name for the M4 and referred to it with their own designation system that will be covered in more detail later. They also named the Lee, and Stuart, and at some point the US Army just stuck with the naming scheme. The full story behind this is still a minor mystery, with US war time documents confirming the ‘general’ names were at least used on paper by the US Army during the war.
Now let’s cover the factory production versions of the Sherman. Also keep in mind, it is very hard to define just how a Sherman may be configured without really knowing where and when it was produced. In some rare cases, large hull, 75mm armed Shermans got produced with normal ammo racks, when the norm for large hatch hull tanks was wet ammo racks.
. . .
(this is a very early production M4 with DV ports that are not welded closed and have not had armor added over them)
These tanks used the same R975 motor as the M3, and M3A1. The vast majority of the bugs in this automotive system were worked out before the M4 even started production. This really helped give the Sherman its reputation for reliability and ease of repair. The M4 had a welded hull with a cast turret mounting the M3, 75mm gun. Early variants had three hull machine guns, and two turret mounted machine guns. The hull guns were all M1919A4 .30 caliber machine guns, two fixed, and one mounted in a ball mount for the co-drivers use. The fixed guns were deleted from production very rapidly. The turret armament remained unchanged for the whole production run: Using the M3 75mm gun with the M1919A4 coaxial machine gun and M2 .50 caliber mounted on the roof. The turret would be the same turret used on all early Shermans and would be interchangeable on all production Shermans. This version was not produced with the later improved T23 turret but did get some large hatch hulls in special variants.
There were two variants of the M4 to be built with the large hatch hull. The first, the M4(105) was a large hatch hull mated to the 105mm howitzer, on the M52 mount, in the standard 75mm turret. These hulls did not have wet ammo racks or gyro stabilizers, and the 105mm turrets had an extra armored ventilator, the only turrets to have them. The M4 (105) gun tanks had a special mantlet, with four large screws in the face, unique to 105 tanks. Production started in February of 44, and continued well into 45, with late production M4(105) tanks getting HVSS suspension. These tanks were used as replacements for the M7 Priest in tank units, and spent most of their time being used as indirect fire support, like the M7 they replaced.
One other variant of the M4 to get the large hatch hull(100 or so small hatch casting were made as well), this was the M4 ‘hybrid’, this hull was welded, but used a large casting very similar to the front of the M4A1 on the front of the hull. It was found that most of the welding hours building the welded hull tanks were spent on the glacis plate. They figured by using one large casting, incorporating the hatches and bow gun would save on welding time and labor costs.
(This is an M4 hybrid, large hatch tank. but with no wet ammo racks)
These M4 hybrids were used by the British to make Ic Fireflies. They liked the 75mm turret these tanks came with since they already had a loaders hatch, this saved them time on the conversion since they didn’t have to cut one.
These large hatch M4s did not get the improved T23 turret, but did have wet ammo racks and all the large hatch hull improvements. Most of these tanks were shipped to Europe or the Pacific, making survivors rare.
The M4 along with the M4A1 were the preferred US Army version of the Sherman until the introduction of the M4A3. This tanks was made in five factories from July of 42 to March of 45, 7584 produced.
(this image is a small hatch M4A1 with DV ports welded closed and add on armor over them, not the very early turret with small mantlet. The suspension on this tank was probably updated from the early built in roller type during a depot rebuilt. Image from the awesome sherman minutia site)
This was virtually the same tank as the M4, with the same motor and automotive systems and armament. The key difference was the cast upper hull. This huge upper hull casting was one piece. This was a very hard thing to do with casting technology at the time, and something the Germans could not have reproduced, they lacked the advanced technology, and facilities needed to do so. Everything from hatches to wheels, and turrets, and guns were interchangeable with the M4 and other Sherman models. This version saw production longer than any other hull type. It also saw all the upgrades like the improved large hatch hull with wet ammo racks, the T23 turret with 76mm gun, and HVSS suspension system. It was 30 of these M4A1 76 HVSS tanks that were the last Shermans ever produced. The M4A1 was also the first to see combat use with the improved M1 gun and T23 turret during operation Cobra. Three factories produced 9527 M4A1s with all turret types from Feb 42 to July of 45.
The US Marines used one Battalion of these tanks on the Cape Gloucester campaign, small hatch M4A1 75 tanks. This was the only use of this tank by the Marines.
(M4A2 75 mid production with improved drivers hoods, from this angle you can not tell the difference between an M4 M4A2, M4A3, image courtesy of the sherman Miniutia site)
This version of the Sherman used a welded hull nearly identical to the M4, but with a pair of vented armored grates on the rear hull deck. The M4A2 tanks used the GM 6046 twin diesel. This version was produced with all the improvements the other types got, like the large hatch hull with wet ammo racks, the T23 turret with improved M1 gun, and HVSS suspension. This version would see very limited combat in US hands, most being shipped to Russia with a few early hulls going to the Brits and USMC. This was the preferred version for Soviet lend lease deliveries, since the USSR was using all diesel tanks. It was produced in six factories with 10,968 of all turret types produced from April of 42 to July 45.
A little trivia about this version, the Sherman used in the movie Fury, was actually a late production M4A2 76 HVSS tank. The only way you can tell a late A2 from a late A3 is by the size of the armored grills on the back deck. They did a great job of hiding this area in the movie.
The Marines operated a lot of small hatch and a fairly large number of large hatch M4A2 tanks, until the supply of 75mm armed version dried up in late 1944. Then they switched over to large hatch M4A3 75w tanks, but there were some A2 holdouts amongst the six battalions.
(this is an M4A3 large hatch 75mm tank, it has wet ammo racks and a hatch for the loader.)
This would be the base for what would be the final Sherman in US Army use, seeing action all the way out to the Korean War in US Army hands. This tank had a welded hull just like the M4, A2, and A4, but used a new motor. The Ford GAA V8, this motor took some time for its bugs to be worked out, so unlike say, the Nazi Germans, the US Army didn’t use it until it was ready for serious production. When it was, it became the preferred US Army version of the tank in both the 75mm and 76mm armed tanks. It would see all the improvements, and be the first hull type to take the HVSS suspension system into combat for the US Army. The M4A3E8 or M4A3 tank with T23 turret and HVSS suspension bolted on would be the final and ultimate US Army Sherman. It would be produced in three factories with all turret types, 12,596 built in total between June 42 and June of 45.
After WWII when the Army wanted to standardize on one Sherman type, any M4A3 large hatch hull they could find would have a T23 turret and HVSS suspension installed on it. The Army was so thorough in these conversions no M4A3 large hatch 75mm gun tanks are known to have survived with the original turrets installed. Any M4A1 HVSS 76 and M4A2 HVSS 76 tanks in Army inventory would have been robbed of their suspensions and turrets so they could be installed on M4A3 large hatch hulls.
(an M4A3E2 Jumbo with correct M3 75mm gun)
The M4A3E2 Jumbo, Fishers fat and special baby!
FTA was the sole producer of one very special variant of the Sherman, the M4A3E2 Jumbo. This version of the Sherman was the assault Sherman, though not expressly designed for it, was manufactured to be able to lead a column up a road and take a few hits from German AT guns or tanks so they could be spotted without having to sacrifice the tank. It had a lot of extra armor, and could take a lot of hits before being knocked out, but was still not impervious to German AT gun fire. Only 254 of these tanks were produced, and all but four were shipped to Europe for use by the US Army. They were all armed with the M3 75mm gun. There was a surplus of M1A1 76mm guns in Europe due to an aborted program re arm 75mm Sherman tanks with the guns. Many of the Jumbo’s ended up with these guns, but none were ever factory installed.
The tank was no different in automotive components from the M4A3 tanks, with the sole difference being the slightly lower final drive gear ratio, going from a 2.84:1 ratio in the base Shermans, to 3.36:1 on the Jumbos. This reduced the top speed slightly but helped the tank get all the extra armor moving. The Jumbos were well liked by their crews and in great demand; no more were built though, the only batch being produced from May to July of 1944. Had the invasion of Japan been needed, a special Jumbo with larger turret that included a flame thrower was considered, but we all know how that story ended.
This version of the Sherman was issued to the Marines when the M4A2 75mm tanks went out of production. The version they would have been issued, would all have been large hatch M4A3 75w tanks, and they may have gotten some with HVSS.
(this is an M4A4, the best way to tell is the extra space between the road wheels)
This tank is the oddball of Sherman tanks. It had a welded hull and used the A-57 multibank motor. A tank motor made from combining five car motors on one crank case. As complicated as this sounds, it was produced in large numbers and was reliable enough to see combat use, though not in American hands in most cases. In US use they tried to limit it to stateside training duty. The Brits found it more reliable than their native power plants, and liked it just fine. This version never got the improved large hatch hull or T23 turret with M1 gun. Most were shipped to the Brits via lend lease and many were turned into Vc Fireflies, making it the most common Firefly type. The Free French also got at least 270 of these tanks in 1944. The Chinese also received these tanks through lend lease but not many. The US Marines operating these tanks in the states as training tanks, 22 of them for two months before they were replaced by M4A2s. This tank had a longer hull, like its Lee cousin to accommodate the big A-57 motor. It was the first Sherman version to go out of production. It was produced in one factory (CDA) from July of 42, to November of 43 with 7499 built.
The A4 has the honor of being the heaviest and largest standard Sherman. The larger hull to accommodate the A57 motor, and the motor itself added weight. The British used these tanks extensively in combat. These tanks show up in British test reports as well, often pitted against tanks like the Cromwell in reliability or other tests, and usually coming out ahead. Anyone who has ever changed the spark plugs on their car should really be able to appreciate how hard a motor made by tying five six cylinder automobile engines together, on one crank would be.
. . .
All Sherman variants share a lot of details and most spare parts interchange. Only the motors really call for different parts. All early Sherman tanks had 51mm of armor at 56 degrees on the front hull, and 76mm on the front of the turret. The 56 degree hulls are called small hatch hulls because the driver and co-driver had small hatches that forced them to twist sideways to get in and out. They also started out with direct vision ports along with periscopes for crew vision. Even the cast tanks matched these specs and the hatches from a cast tank could be used on a welded tank. These early hulls had some of the ammo racks in the sponsons above the tracks. Not a great place for ammo, but not an uncommon one for it either. As they improved the hull, they added plates over the direct vision ports and eventually removed them from the castings. Large plates were eventually welded over the ammo racks on the sides, and this extra armor was eventually just added into the casting on the cast hulls. It’s safe to say no small hatch tanks were factory produced with a 76mm gun or improved T23 turret.
The major hull change came when they upgraded the drivers and co drives hatches making them bigger. They also thickened the front armor to 64mm but reduced the slope to 47 degrees to fit the new driver’s hatches. The M4 (hybrid and 105 only), M4A1, A2, and A3 were produced with these improved large hatch hulls. Many of these improved large hull tanks had the original 75mm gun and turret. Even the M4A3 with HVSS suspension was produced with the 75mm gun and turret. Most of the large hatch production was with the new and improved T23 turret. These larger hatch hulls would still accept the majority of the spares the older hulls used and the lower hull remained largely unchanged and would accept all the suspension types. Any large hatch M4A3 hull was likely converted to an M4A3 76 HVSS post WWII.
Through the whole production run minor details were changed. The suspension saw many different version before the final HVSS type was produced. The track types also changed and there were many variants made from rubber and steel, or steel. There were even at least six different types of road wheel! There are so many minor detail changes, the scope is to big to cover in this post, needless to say, the only other tank I know of with so many minor changes over the production run was the Tiger, and in the Tigers case it’s just sad, with so few produced, it means almost no two tigers were the same. This was not the case for the Shermans and the changes did not slow production down at all and in many cases were just different because a particular part, like an antenna mount, or driver’s hood, could have been sourced from a different sub-contractor, and the parts may look different, but would function exactly the same. Tiger parts are not good at interchanging without modification, and a crew a craftsmen to custom fit them. The changes made to the Sherman were either to incorporate better parts, or to use a locally made substitute part for one in short supply, so making their own version allowed them to continue production without a slowdown.
To really get a handle on these differences there are two really great sources.
This is the easy, way: Sherman Minutia site a great site that really covers the minor detail changes on the Sherman tank very well. You can spend hours reading it and looking over the pictures. It explains little of the combat history of the Sherman but covers the minor changes on the vehicles themselves very well. You can spend hours on this site learning about minor Sherman details. It is also a primary source for this post.
Another great way is to get a copy of: Son of a Sherman volume one, The Sherman design and Development by Patrick Stansell and Kurt Laughlin. This book is a must have for the Sherman plastic modeler or true enthusiast. It is filled with the tiny detail changes that took place on the Sherman production lines from start to finish. They cover everything from lifting eyes to ventilators, casting numbers, to most minor change to the turrets. Get it now before it goes out of print and the price skyrockets. I liked it so much I bought two!
The turret saw continual change as well, but remained basically the same. The 75mm gun never changed but its mount and sighting system did. The turret lost the pistol port, and then gained it back. It gained a rotor shield over time and an extra hatch. All these detail changes are covered on the site above and in the Son of a Sherman book. The important thing to note was the tank saw continual improvement to an already reliable, and easy to produce design. The Sherman was easy to produce for an industrial nation like the USA, but beyond Nazi Germany’s technical capabilities for several reasons, like large casting and the gun stabilization system, or even multiple reliable motors to power the tens of thousands of tanks made.
In the basics section I’m only going to cover one more thing. The Sherman tank was not as blind as the tanks it faced. The M4 series, from the first production tank, to the final Sherman that rolled off any of the production lines, were covered in periscopes or view ports for the crew. The gunner had a wide angle periscope that had incorporated the site for the main gun, and they very quickly added a telescopic site to go with it. The commander had a large rotating periscope in his rotating copula. The loader had a rotating periscope and the driver and co-driver had two, one in their hatch, and another mounted in the hull right in front of them once the DV ports were deleted (non-rotating). Later version added a direct vision cupola and a periscope for the loader in his new hatch. All these periscopes could be lowered and the port closed, and if damage easily and quickly replaced from inside the tank. All this gave the Sherman an advantage in spotting things outside the tank; they were still blind, just not as blind as most of the tanks they would face. Finding an AT gun in a bush could be very challenging for any tank, and infantry if not scared off by the presence of a tank in the first place can sneak up on one pretty easy.
This was a big advantage when it saw combat and throughout the tanks career it was always one of the best if not the best tank of the war. It was reliable, the crew had a good chance of spotting enemies before other tank crews, the gun was stabilized, fast firing, and accurate. It was as good or better than most of the tanks it faced, even the larger German tanks. These tanks were largely failures, with only long debunked Nazi propaganda propping up their war record. The Sherman has the opposite problem.
Sherman Builders: Just How Many Tank Factories Did the US Have Anyway?
They Had 10 and 1 in Canada.
Most of the information in this section will be a summation of the section in Son of a Sherman. Other stuff I had to dig around on the internet for. Anyone who has more info on the tank makers, please feel free to contact me. Parts from all these tank makers would interchange. Many used the same subcontractors. I don’t think anyone has tried or if it’s even possible to track down all the sub-contractors who contributed parts to the Sherman at this point. Some of the manufactures were more successful than others, some only producing a fraction of the total Sherman production, others producing large percentages. By the end of production, all the US and her allies needs for Shermans were being handled by just three of these factories.
American Locomotive (ALCO)
ALCO also produced M3 and M3A1 Lees, and made Shermans up to 1943. They were a fairly successful pre-war locomotive manufacturer founded in 1901 in Schenectady, New York. They also owned Montreal Locomotive works. ALCO made several version of the Sherman, and stayed in the tank game until the late 50s, helping with M47 and M48 production. The company went under in 1969.
Baldwin Locomotive Works (BLM)
Baldwin was another early producer, building three versions of the Lee, The M3A2, M3A3, and M3A5. They mostly built small hatch M4s, with just a handful of M4A2(12). They were out of the Sherman game by 1944 and out of business by 72. They were founded in Philly in 1825, and produced 70,000 steam locomotives before it died.
(M4A4 and M3s being built side by side at CDA, photo courtesy of the Sherman Minutia site )
Chrysler Defense Arsenal (CDA)
Chrysler Defense Arsenal is kind of special. It was a purpose built tank factory, funded by the US Government, and managed and built by Chrysler. Construction on the factory started in September of 1940. Completed M3 Lee tanks were rolling of the line by April of 1941. This was before the factory was even finished being built. It was built to stand up to aerial bombing. They produced M4A4, and M4 tanks as well and M4 105s, M4A3(105)s, and M4A3 76 tank and nearly 18,000 of them. Chrysler was the sole producer of M4A3E8 76 w Shermans, or the tank commonly known and the Easy 8. They produced 2617 units, but post war many A3 76 tanks were converted over to HVSS suspension. A very big chunk of the overall Sherman production came from this factory and it went on to produce M26 Pershing tanks.
Chrysler built this factory in a suburb of Detroit, Warren Township Michigan. Chrysler used it’s many other facilities in the Detroit area as sub manufacturers, and many of their sub-contractors got involved too. CDA not only produced the tanks, it had the capacity to pump out huge numbers of spare parts. CDA lived into 90s before Chrysler defense systems got sold off to General Dynamics. It took part in making the M26, M46, M47, M48, M60 and M1 tanks.
Federal Machine & Welder (FMW)
I couldn’t find much out about FMW, Son of a Sherman says they were founded in Warren Ohio in 1917. They produced less than a thousand M4A2 small hatch tanks. They were slow to produce them, making about 50 a month. They were not contracted to make any more Shermans after their first 540 total, 1942 contract. They did build some M7, and M32 tank retrievers. They were out of business by the mid-fifties.
Fisher Tank Arsenal (FTA)
Fisher Tanks Arsenal (FTA) has a lot of common with Chrysler Defense Arsenal, except this time Uncle Sam went to Fisher Body, a division of General Motors. Fisher decided to build the tank plant in Grand Blanc, south of Flint Michigan. The factory broke ground in November of 1941 and the first M4A2 Sherman rolled off the line in January of 1942, before the factory was fully built.
The M4A2 was something of this factory specialty, in particular early on, with them producing a large number of the small hatch M4A2 sent off to Russia, and a few of the rarer large hatch 75mm gun tanks, around 986 small hatch tanks, and about 286 large hatch tanks.
They also produced nearly 1600 large hatch, 76mm gun tanks, or the M4A2 (76)w. These tanks went exclusively to Russia as part of Lend Lease. These tanks were ordered over four different contracts and the final ones off the production line were all HVSS tanks. The HVSS suspension may have seen combat with the Russians before the US Army used it. Oddly, this factory also produced M4A3 76w tanks, but never with the HVSS suspension. Fisher produced a significant number M4A3 and Large hatch 75mm tanks at their factory, but nowhere near their M4A2 production.
Ford Motor Company (FMC)
Ford was a surprisingly small player in the Sherman tale. They are very important in that they developed the Ford GAA V8 covered earlier, and a lot of spare parts. But they only produced 1690 small hatch Shermans between June of 42 and Oct 43. They built a few M10s as well. All these tanks and tank destroyers were produced at their Highland Park facility. After 1943, they stopped building tanks, and wouldn’t get back into until the 50s, and even then it was just for a large production run over a short time, of M48s.
Lima Locomotive Works (LLW)
Lima was one of the first producers of the cast hull M4A1. It did not produce any Lee tanks. Its production capacity had been taken by locomotives to the point just before Sherman production started. They produced the first production M4A1, that was shipped to England, named ‘Michael’, and it’s still on display at the Bovington Museum. They produced Shermans from February of 42, to September of 1943, producing M4A1s exclusively, and they built 1655 tanks. The war was a boon for Lima, they’d been in business since 1870, and the contracts from the military for locomotives really helped them out. Post war, they failed to successfully convert to diesel electric locomotives and merged with another firm.
Montreal Locomotive Works (MCW)
MLW was owned by American Locomotive. They produced some wacky Canadian tank based off the Lee chassis, called the Ram, and Ram II, these floppy creations were only armed with a 2 pounder in the Rams case, and a 6 pounder, in the Ram IIs case, and they produced almost 2000 of the wacky things, what’s that all aboot? They eventually got around to producing a proper Sherman tank, the M4A1 “Grizzly”, producing only about 188 tanks. A very few had an all metal track system that required a different sprocket. Other than that, there was no difference between a grizzly and an M4A1 manufactured by any other Sherman builder. Don’t believe the Canadian propaganda about it having thicker armor!
Pacific Car & Foundry (PCF)
PCF was founded in 1905 in Bellevue Washington. The only west coast tank maker, PCF produced 926 M4A1s from May of 1942, to November of 1943. As soon as production stopped they started production on the M26 tractor, the truck portion of the M26 tank transporter. They never got back into tank production, but still exist today as PACCAR Inc., one of the largest truck makers in the world.
Pressed Steel Car (PST)
PSC was one of the big boys of Sherman production, and they also produced the final M4s made, a group of 30 M4A1 76 HVSS tanks. PSC was founded in Pittsburg in 1899, but their tank factory was in Joliet, Illinois. They were the second manufacturer to make the tank and across all the versions they made, they produced 8147 Sherman tanks.
They started tank production with the M3 Lee in June of 41, and stopped production on that in August of 1942. They then produced the M4A1 from March of 42, to December of 43, and the standard M4 from October of 42 to August of 43.
They were one of the final three tank makers to stay in the tank making business after 1943, along with CDA and FTA. PSC would produce large hatch M4A1 76 tanks, including HVSS models late in the run, totaling more than 3400 M4A1 tanks. They produced 21, M4A2 76 HVSS tanks, towards the end of 45.
They were out of business by 56, with no tank production after those final 30 M4A1 76 HVSS tanks.
Pullman Standard (PSCC)
Pullman Standard was a pretty famous luxury train passenger car maker, and another company that made rolling stock combined into one company. Pullman Palace Car Co was founded in 1867, or there about. I’m sure some train geek will be dying to fill me in on the company’s history but I’m not really going to look deeply into it. It does make for one of the more interesting stories about a Sherman tank producer. Their main tank factory was in Butler, Pennsylvania. And they helped produce some Grant tanks before they started Sherman production.
They produced the M4A2 from April of 42 to September of 43, and produced 2737 tanks. They also produced 689 standard M4 Sherman tanks from May of 43, to September of 43. Soon after these contracts were finished the US Government broke the company up due to some anti-trust complaint.
The thing to remember about all the Sherman makers is each one had a small imprint on the tanks they produced. So, yes, an M4A1 small hatch tank was the same no matter who made it and all parts would interchange with no modification needed, but the tanks from different makers still had small, cosmetic differences. They may have been something like nonstandard hinges on the rear engine doors to the use of built up antenna mounts instead of cast. Or wide drivers hoods or narrow, to where the lift rings on the hull were and how they were made or even Chrysler's unique drive sprocket they put on all their post A4 tanks. None of this meant the parts couldn't be salvaged and used on another Sherman from another factory without much trouble. Some factories may have produced tanks faster than others, but they all produced them within the contracts specification or they were not accepted.
Shortly after Jeeps_Guns_Tanks started his substantial foray into documenting the development and variants of the M4, I joked on teamspeak with Wargaming's The_Warhawk that the next thing he ought to do was a similar post on the T-72.
Haha. I joke. I am funny man.
The production history of the T-72 is enormously complicated. Tens of thousands were produced; it is probably the fourth most produced tank ever after the T-54/55, T-34 and M4 sherman.
For being such an ubiquitous vehicle, it's frustrating to find information in English-language sources on the T-72. Part of this is residual bad information from the Cold War era when all NATO had to go on were blurry photos from May Day parades:
As with Soviet aircraft, NATO could only assign designations to obviously externally different versions of the vehicle. However, they were not necessarily aware of internal changes, nor were they aware which changes were post-production modifications and which ones were new factory variants of the vehicle. The NATO designations do not, therefore, necessarily line up with the Soviet designations. Between different models of T-72 there are large differences in armor protection and fire control systems. This is why anyone arguing T-72 vs. X has completely missed the point; you need to specify which variant of T-72. There are large differences between them!
Another issue, and one which remains contentious to this day, is the relation between the T-64, T-72 and T-80 in the Soviet Army lineup. This article helps explain the political wrangling which led to the logistically bizarre situation of three very similar tanks being in frontline service simultaneously, but the article is extremely biased as it comes from a high-ranking member of the Ural plant that designed and built the T-72. Soviet tank experts still disagree on this; read this if you have some popcorn handy. Talking points from the Kharkov side seem to be that T-64 was a more refined, advanced design and that T-72 was cheap filler, while Ural fans tend to hold that T-64 was an unreliable mechanical prima donna and T-72 a mechanically sound, mass-producible design.
So, if anyone would like to help make sense of this vehicle, feel free to post away. I am particularly interested in:
-What armor arrays the different T-72 variants use. Diagrams, dates of introduction, and whether the array is factory-produced or a field upgrade of existing armor are pertinent questions.
-Details of the fire control system. One of the Kharkov talking points is that for most of the time in service, T-64 had a more advanced fire control system than contemporary T-72 variants. Is this true? What were the various fire control systems in the T-64 and T-72, and what were there dates of introduction? I am particularly curious when Soviet tanks got gun-follows-sight FCS.
-Export variants and variants produced outside the Soviet Union. How do they stack up? Exactly what variant(s) of T-72 were the Iraqis using in 1991?
-WTF is up with the T-72's transmission? How does it steer and why is its reverse speed so pathetically low?
Communist tracked boxes with pancake turrets: don't you dare to confuse GLORIOUS T-80 battle tank with Kharkovite T-64 tractor that doesn't work.By LoooSeR
Hello, my friends and Kharkovites, take a sit and be ready for your brains to start to work - we are going to tell you a terrible secret of how to tell apart Soviet tanks that actually works like GLORIOUS T-80 and The Mighty T-72 from Kharkovites attempt to make a tank - the T-64. Many of capitalists Westerners have hard time understanding what tank is in front of them, even when they know smart words like "Kontakt-5" ERA. Ignoramus westerners!
Because you are all were raised in several hundreds years old capitalism system all of you are blind consumer dummies, that need big noisy labels and shiny colorful things to be attached to product X to be sold to your ignorant heads and wallets, thats why we will need to start with basics. BASICS, DA? First - how to identify to which tank "family" particular MBT belongs to - to T-64 tree, or T-72 line, or Superior T-80 development project, vehicles that don't have big APPLE logo on them for you to understand what is in front of you. And how you can do it in your home without access to your local commie tank nerd?
Easy! Use this Putin approved guide "How to tell appart different families of Soviet and Russian tanks from each other using simple and easy to spot external features in 4 steps: a guide for ignorant western journalists and chairborn generals to not suck in their in-depth discussions on the Internet".
Chapter 1: Where to look, what to see.
T-64 - The Ugly Kharkovite tank that doesn't work
We will begin with T-64, a Kharkovite attempt to make a tank, which was so successful that Ural started to work on their replacement for T-64 known as T-72. Forget about different models of T-64, let's see what is similar between all of them.
T-72 - the Mighty weapon of Workers and Peasants to smash westerners
Unlike tank look-alike, made by Kharkovites mad mans, T-72 is true combat tank to fight with forces of evil like radical moderate barbarians and westerners. Thats why we need to learn how identify it from T-64 and you should remember it's frightening lines!
The GLORIOUS T-80 - a Weapon to Destroy and Conquer bourgeois countries and shatter westerners army
And now we are looking at the Pride of Party and Soviet army, a true tank to spearhead attacks on decadent westerners, a tank that will destroy countries by sucking their military budgets and dispersing their armies in vortex of air, left from high-speed charge by the GLORIOUS T-80!
The T-80 shooting down jets by hitting them behind the horizont
Hey guys. This is my first post in this forum.
I want to find out sources for 2 information.
Firstly, a friend of mine told me about the accuracy of T-80B tested in 1980s.
T-80B 1000m 1500m 2000m
87% 66% 46%
I asked him where he found this data. But he told me he forgot where he did find this since too much time passed from that moment.
The Second one is about Russian ballistic computer's range-finding rate.
One day, one of my friends who speaks russian quite well showed me a product info. of russian(maybe ukrainian) gunner's primary sight.
It was written that range-finding rate of the sight after laser fired-off 0.3~3.0 seconds.
I totally forgot the address of that product brochure.
I'd be very appreciated if you help me finding links of these information.