SH_MM Posted October 3, 2020 Report Share Posted October 3, 2020 Are you sure about the Patria AMV? It obviously is designed with modular armor, but the Rosomak (with reduced armor protection) has a 3 mm spaced plate in front of 8 mm base armor. Rosomak-M has a 10 + 18 mm spaced array. Quote Link to comment Share on other sites More sharing options...
Wiedzmin Posted October 3, 2020 Report Share Posted October 3, 2020 5 minutes ago, SH_MM said: Are you sure about the Patria AMV? It obviously is designed with modular armor, but the Rosomak (with reduced armor protection) has a 3 mm spaced plate in front of 8 mm base armor. Rosomak-M has a 10 + 18 mm spaced array. it's only basic structure armour, without any addons i will make version with addons later, if will have more info about it, don't have thickness of LAV25 and Stryker cermamic Quote Link to comment Share on other sites More sharing options...
Zadlo Posted October 3, 2020 Report Share Posted October 3, 2020 12 hours ago, SH_MM said: Rosomak-M has a 10 + 18 mm spaced array. Only Rosomak-M1. 10mm steel plates in spaced array were the applique armour from Rafael. Meanwhile indigenous solution which was in Rosomak-M1M uses ceramic and polymer layers inside the array. Quote Link to comment Share on other sites More sharing options...
Zadlo Posted November 3, 2020 Report Share Posted November 3, 2020 Scheme of HITFIST-30p complete armour - WITU accidentally (or not) unveiled that during the certification. Quote Link to comment Share on other sites More sharing options...
Serge Posted January 1, 2021 Report Share Posted January 1, 2021 On 9/2/2020 at 3:59 PM, Collimatrix said: And the K21 that the Redback is based on [...] The AS21 is by no means based on the K21. It’s a completely new platform. Collimatrix 1 Quote Link to comment Share on other sites More sharing options...
Kal Posted January 2, 2021 Report Share Posted January 2, 2021 Are there any good estimates for what a nominal 100mm armour tile consisting of Front face (Outer shell Al + polyurea, but inconsequential thickness) 20 mm kevlar (prepreg) 40 mm alumina (small hex tiles) 40 mm kevlar (prepreg) Rear face (same as front face -2mm Al, 0.8 mm polyurea) Techology base is Korean/Japanese level body armour manufacturer so good precompression during manufacture but minimal obvious remainig precompression for in-use.....but use is IFV. Quote Link to comment Share on other sites More sharing options...
Wiedzmin Posted January 18, 2021 Report Share Posted January 18, 2021 Pizarro IFV first plate of spaced array Quote Link to comment Share on other sites More sharing options...
LoooSeR Posted February 10, 2021 Report Share Posted February 10, 2021 https://otvaga2004.mybb.ru/viewtopic.php?id=2037&p=21#p1399887 Stolen from otvaga, (skylancer's scans) - Article "Armor protection of serial tanks of the USA, Germany, England and France", collection Armored vehicles and weapons abroad, 1975, No. 4. M60A1 Spoiler Leo-1 Chieftain Mk3/3 "AMX-63" Quote Link to comment Share on other sites More sharing options...
Lord_James Posted February 10, 2021 Report Share Posted February 10, 2021 8 hours ago, LoooSeR said: Hide contents "AMX-63" I’m going to assume “AMX-63” is actually the AMX-30, named after the estimated year it was designed? Quote Link to comment Share on other sites More sharing options...
Beer Posted February 10, 2021 Report Share Posted February 10, 2021 3 minutes ago, Lord_James said: I’m going to assume “AMX-63” is actually the AMX-30, named after the estimated year it was designed? It certainly looks like AMX-30. Quote Link to comment Share on other sites More sharing options...
SH_MM Posted May 23, 2021 Report Share Posted May 23, 2021 Quote Link to comment Share on other sites More sharing options...
SH_MM Posted April 16, 2022 Report Share Posted April 16, 2022 Photos from Marder 1A3 demilitarization process in Germany (armor has to be removed in certain areas, so law enforcement could defeat it), giving some visible references on armor thickness. Spoiler Wiedzmin 1 Quote Link to comment Share on other sites More sharing options...
Wiedzmin Posted April 17, 2022 Report Share Posted April 17, 2022 On 4/16/2022 at 3:04 PM, SH_MM said: Photos from Marder 1A3 demilitarization process in Germany (armor has to be removed in certain areas, so law enforcement could defeat it), giving some visible references on armor thickness. better resolution possible ? so sides will be 15mm/30deg---air--8mm-air16mm--4mm more or less KPVT B32 at PB Quote Link to comment Share on other sites More sharing options...
SH_MM Posted April 18, 2022 Report Share Posted April 18, 2022 18 hours ago, Wiedzmin said: better resolution possible ? Unfortunately not, these photos are from the website of the company, which demilitarized the Marders. Quote Link to comment Share on other sites More sharing options...
Wiedzmin Posted April 18, 2022 Report Share Posted April 18, 2022 3 hours ago, SH_MM said: e company Rockensußra ? Quote Link to comment Share on other sites More sharing options...
SH_MM Posted April 18, 2022 Report Share Posted April 18, 2022 5 hours ago, Wiedzmin said: Rockensußra ? No, the Battle Tank Dismantling GmbH does not demilitarize AFVs - it only scraps them. The company is called "Marco Pablo Sp. z o. o." and is located in Poland (their website is toysforboys4.eu). Wiedzmin 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.