Jump to content
Sturgeon's House
  • Similar Content

    • By Sturgeon
      @Toxn
      @Dominus Dolorem
      @Lord_James
      @A. T. Mahan
      @delete013
      @Sten
      @Xoon
      @Curly_
      @N-L-M
      @Sturgeon
       
      detailed below is the expected format of the final submission.
      The date is set as Saturday the 10th of July at 23:59 CST.
      Again, incomplete designs may be submitted as they are and will be judged as seen fit.

      PLEASE REMEMBER ALL ENTRIES MUST BE SUBMITTED IN USC ONLY
       
       
      FINAL SUBMISSION:
      Vehicle Designation and name
       
      [insert 3-projection (front, top, side) and isometric render of vehicle here]
       
      Table of basic statistics:
      Parameter
      Value
      Mass, combat
       
      Length, combat (transport)
       
      Width, combat (transport)
       
      Height, combat (transport)
       
      Ground Pressure, zero penetration
       
      Estimated Speed
       
      Estimated range
       
      Crew, number (roles)
       
      Main armament, caliber (ammo count ready/stowed)
       
      Secondary armament, caliber (ammo count ready/stowed)
       
       
      Vehicle designer’s notes: explain the thought process behind the design of the vehicle, ideas, and the development process from the designer’s point of view.
      Vehicle feature list:
      Mobility:
      1.     Link to Appendix 1 - RFP spreadsheet, colored to reflect achieved performance.
      2.     Engine- type, displacement, rated power, cooling, neat features.
      3.     Transmission - type, arrangement, neat features.
      4.     Fuel - Type, volume available, stowage location, estimated range, neat features.
      5.     Other neat features in the engine bay.
      6.     Suspension - Type, Travel, ground clearance, neat features.
      Survivability:
      1.     Link to Appendix 1 - RFP spreadsheet, colored to reflect achieved performance.
      2.     Link to Appendix 2 - armor array details.
      3.     Non-specified survivability features and other neat tricks - low profile, gun depression, instant smoke, cunning internal arrangement, and the like.
      Firepower:
      A.    Weapons:
      1.     Link to Appendix 1 - RFP spreadsheet, colored to reflect achieved performance.
      2.     Main Weapon-
      a.      Type
      b.      Caliber
      c.      ammunition types and performance (short)
      d.     Ammo stowage arrangement- numbers ready and total, features.
      e.      FCS - relevant systems, relevant sights for operating the weapon and so on.
      f.      Neat features.
      3.     Secondary weapon - Similar format to primary. Tertiary and further weapons- likewise.
      4.     Link to Appendix 3 - Weapon system magic. This is where you explain how all the special tricks related to the armament that aren’t obviously available using 1960s tech work, and expand to your heart’s content on estimated performance and how these estimates were reached.
      B.    Optics:
      1.     Primary gunsight - type, associated trickery.
      2.     Likewise for any and all other optics systems installed, in no particular order.
      C.    FCS:
      1.     List of component systems, their purpose and the basic system architecture.
      2.     Link to Appendix 3 - weapon system magic, if you have long explanations about the workings of the system.
      Fightability:
      1.     List vehicle features which improve its fightability and useability.
      Additonal Features:
      Feel free to list more features as you see fit, in more categories.
      Free expression zone: Let out a big yeehaw to impress the world with your design swagger! Kindly spoiler this section if it’s very long.
       
       Example for filling in Appendix 1
       Example for filling in Appendix 2
       Example for filling in Appendix 3

      GOOD LUCK!
    • By Monochromelody
      IDF had kept about 100 Tiran-6/T-62s since 1973, and remain service until 1990s. 
       
      I wonder if there's any modification on Tiran-6, like changing the powerpack into 8V71T+XTG-411, adapting steering wheel. 
       
      I also heard that British ROF had produce a batch of 115mm barrel for IDF, while MECAR or NEXTER produced high-performance APFSDS for 115mm gun. Did IDF really use these barrels for original barrel replacement? 
       
      And about protection, did IDF put Blazer ERA on Tiran-6? Or they use more advanced APS like Trophy? 
       
      Thank you. 
    • By Beer
      I haven't found an appropriate thread where to put some interesting rare stuff related to WW2 development, be it industrial one or makeshift field modifications. 
       
      Let's start with two things. The first one is a relatively recently found rarity from Swedish archives - a drawing of ČKD/BMM V8H-Sv tank. The drawing and a letter was found by WoT enthusiasts in Swedish archives in 2014 (the original announcement and the drawing source is here). The drawing is from a message dated 8th September 1941. One of the reasons why this drawing was not known before may be that the Czech archives were partially destroyed by floods in 2002. Anyway it is an export modification of the V-8-H tank accepted into Czechoslovak service as ST vz.39 but never produced due to the cancelation of all orders after Münich 1938 (for the same reason negotiations about licence production in Britain failed). Also later attempt to sell the tank to Romania failed due to BMM being fully busy with Wehrmacht priority orders. The negotiations with Sweden about licence production of V8H-Sv lasted till 1942, at least in May 1942 Swedish commission was present in Prague for negotiations. The tank differed compared to the base ST vz.39 in thicker armor with different front hull shape (armor 60 mm @ 30° on the hull front and also 60 mm on the turret; all sides were 40 mm thick). The tank was heavier (20 tons) and had the LT vz.38 style suspension with probably even larger wheels. The engine was still the same Praga NR V8 (240-250 Hp per source). The armament was unchanged with 47 mm Škoda A11 gun and two vz.37 HMG. The commander's cupola was of the simple small rotating type similar to those used on AH-IV-Sv tankettes. It is known that the Swedes officially asked to arm the tank with 75 mm gun, replace the engine with Volvo V12 and adding third HMG to the back of the turret. In the end the Swedes decided to prefer their own Strv/m42. 

      Source of the drawing
       
      The second is makeshift field modification found on Balkans. It appears Ustasha forces (and possibly some SS anti-partizan units) used several Italian M15/42 medium tanks with turrets from Pz.38(t). There are several photos of such hybrids but little more is known. On one photo it is possible to see Ustasha registration number U.O. 139.

      Few more photos of such hybrid.
       
      It appears that the source of all those photos to be found on the internet is this book, Armoured units of the Axis forces in southeastern Europe in WW2 by Dinko Predoevic. 
       
    • By SuperComrade
      I was recently looking at the Japanese wikipedia page for the Chi-Ha tank, and it had this section on the name of the tank:

       
       
      I have never heard of such nomenclature, and obviously I don't have access to such documents since I don't live in Japan. There is no reference for this part, so can anyone confirm that they actually did use "MTK" etc.?
×
×
  • Create New...